- Product ID: 395312
- Suitable For: bonding materials to floor, wall and ceiling, where the extremely high initial strength of the product is beneficial for this high-performance adhesive.
- Area of use: INT & EXT
- Application Method: silicone gun
- Time to full cure: 24 hours
- Volume: 310ml
- Container Type: cartridge
- Type: sealant
- Colour: white
- Brand: Illbruck
- Manufactuer: Illbruck
- Box Size: 12
illbruck SP350 has been developed to bond materials to floor, wall and ceiling, where the extremely high initial strength of the product is beneficial for this high-performance adhesive.
Product Benefits
– Strong initial grab and rapid development of final bond
– The formulation is a solvent-free, very low odour, and chemically neutral
– Instant grab, which will minimise the need for additional clamping
– Excellent resistance to light, weather and ageing – suitable for internal and external applications
Please note this is a non-stock item & extended lead times will apply
For all other illbruck products on our site, please click here.
For further information you may need on illbruck, please visit their website here.
illbruck SP350 is ideal for a vast range of interior & exterior applications and may be applied to damp substrates. Applications include:
– Fixing PVCu & Aluminium nosings and extrusions to concrete and wooden stairs.
– Carpet grippers to most subfloors without using tacks or nails.
– Majority of types of wall cladding, direct wall studding, internal wall surfaces or timber battens.
– Can be applied to damp, but not soaking wet surfaces.
– For the best adhesion, surfaces should be clean, dry, sound and free of contamination.
– Always carry out a small test area to confirm compatibility before use.
– Roughen non-porous surfaces.
– On surfaces such as glass, aluminium, ceramics, lacquered wood, epoxy and polyester no primer is required. For other materials, please contact tremco illbruck Technical Services.
For application guns for this product, please click here.
Use in well-ventilated areas and always ensure all recommended protective equipment is worn during handling & application of this product. For full recommendations, refer to the datasheet
Cleaning
Remove excess adhesive immediately with illbruck AT200 High Strength Cleaner. Ensure surface is solvent resistant before cleaning. Cured adhesive can only be removed mechanically.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £51.83 inc. VAT
£43.19 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.