Everbuild STICK2 – Contact Spray Adhesive 500ml

(1 customer review)


£4.08 inc. VAT
£3.40 ex. VAT

Checkout
  • Product ID: 484593
  • Suitable For: Ideal for securing most carpet floor coverings
  • Area of use: INT & EXT
  • Application Method: spray
  • Volume: 500ml
  • Container Type: spray can
  • Type: adhesive
  • Brand: Everbuild
  • Manufactuer: Everbuild
  • Box Size: 1

 

Everbuild STICK2 Contact Adhesive may be a premium grade rubber based contact adhesive suitable to be used with a good sort of materials for both professional and DIY use. The product could also be used internally and externally for bonding decorative laminates, all kinds of wood, rigid PVC, ABS, cork, linoleum, rubber, stone, metals and dense fabrics.

Product Benefits:

– Good adhesion
– Fast rate of tack development.
– Ease of use no messy spreading.
– Time-saving easier and quicker than most trowel spreaders applied adhesives.
– The foaming formula gives low soak in into most substrates.

 

 

 

We offer a wide range of other Adhesives & Everbuild products on our website.

For any longer information, you’ll need, please visit the Everbuild Website.

 

 

– Everbuild STICK2 Spray Contact Adhesive may be a sprayable glue.
– Bonds to most common materials
– Ideal for securing most carpet floor coverings,
– Suitable for internal and external use
– Gives excellent permanent or temporary adhesion depending on the method of application.

– Subfloors eliminates the need for gripper rods.
– Most joinery applications.
– Bonds all woods composite board etc.
– Fixing most common laminate materials.
– Bonding metals to most surfaces.
– Bonds rubber, most plastics and leather
– As a general-purpose household & hobby adhesive

 

APPLICATION

Shake the can well before use.

Select the fan width by turning the nozzle to the desired position. Spray adhesive from 6-8 inches (15-20 cm) away onto one or both surfaces; depending on the type of surface/strength of bond required. The surfaces to be glued should be clean and free from dust, grease and other contaminants.

Strong bonding
Apply 1-3 coats (depending on strength required) to both surfaces. Allow solvent to evaporate (30 seconds) and press surfaces together from centre outwards.

LIMITATIONS

▪ Do not use on soft (plasticised) PVC.
▪ Do not use on polystyrene.
▪ don’t use on bitumen or tar leaching products.
▪ Do not use in areas subject to continuous water immersion.

Always allow the adhesive to become touch dry on both surfaces before bringing surfaces together – premature bonding will cause solvent entrapment and blistering of laminates.

At low temperatures, care must be taken to ensure that the temperature of the adhesive and both surfaces to be bonded is higher than the ambient temperature. Cold materials have a robust tendency to draw in moisture present within the surrounding air.

1 review for Everbuild STICK2 – Contact Spray Adhesive 500ml

  1. Stuart (verified owner)

    Good , easy to use

Add a review

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £3.11 inc. VAT
£2.59 ex. VAT

From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £8.03 inc. VAT
£6.69 ex. VAT

From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £10.07 inc. VAT
£8.39 ex. VAT

From: £10.07 inc. VAT
£8.39 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.11 inc. VAT
£2.59 ex. VAT

From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.11 inc. VAT
£2.59 ex. VAT

From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £6.43 inc. VAT
£5.36 ex. VAT

From: £6.43 inc. VAT
£5.36 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £2.86 inc. VAT
£2.38 ex. VAT

From: £2.86 inc. VAT
£2.38 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £2.69 inc. VAT
£2.24 ex. VAT

From: £2.69 inc. VAT
£2.24 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

£6.17 inc. VAT
£5.14 ex. VAT

£4.84 inc. VAT
£4.03 ex. VAT

£4.84 inc. VAT
£4.03 ex. VAT

From: £7.45 inc. VAT
£6.21 ex. VAT

From: £7.45 inc. VAT
£6.21 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £2.20 inc. VAT
£1.83 ex. VAT

From: £2.20 inc. VAT
£1.83 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

£96.19 inc. VAT
£80.16 ex. VAT

£96.19 inc. VAT
£80.16 ex. VAT

£2.75 inc. VAT
£2.29 ex. VAT

£2.75 inc. VAT
£2.29 ex. VAT

From: £2.06 inc. VAT
£1.72 ex. VAT

From: £2.06 inc. VAT
£1.72 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

  • £3.19 inc. VAT
    £2.66 ex. VAT

    £3.19 inc. VAT
    £2.66 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £2.94 inc. VAT
    £2.45 ex. VAT

    £2.94 inc. VAT
    £2.45 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £9.06 inc. VAT
    £7.55 ex. VAT

    £9.06 inc. VAT
    £7.55 ex. VAT
      Everbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties.     For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit

  • £6.78 inc. VAT
    £5.65 ex. VAT

    £6.78 inc. VAT
    £5.65 ex. VAT
      Everbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion.   For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple