Everbuild Everflex Silicone Eater 100ml


£6.71 inc. VAT
£5.59 ex. VAT

Checkout
  • Product ID: SILEAT
  • Suitable For: use on aluminium and its alloys, copper and its alloys, iron, steels, glass, ceramics, epoxy composites, most plastics.
  • Area of use: INT & EXT
  • Application Method: silicone gun
  • Volume: 100ml
  • Container Type: cartridge
  • Type: remover
  • Brand: Everbuild
  • Manufactuer: Everbuild
  • Box Size: 1
Data Sheets

Download Safety Sheet

Download Tech Data

 

Everbuild Everflex Silicone Eater is specifically designed to remove all silicone based sealants and surface water repellents – cured and uncured. The product acts by denaturing silicone polymers, making them easily water or solvent cleanable.

Advantages

– Readily denatures silicone.
– May be used vertically as well as horizontally.
– Water clean-up.

 

For all other cleaners on our website, please click here. For tools, please click here.

For any further information on Everbuild’s products, please visit their website here.

– May be used on aluminium* and its alloys, copper and its alloys, iron, steels, glass, ceramics, epoxy composites, most plastics.
– Has very little effect on rubber and other elastomers.
– Everbuild Everflex Silicone Eater has little impact on most painted surfaces.

APPLICATION

SUBSTRATE PREPARATION

All surfaces must be dust free. Cut as much as possible away from the silicone sealant using a sharp knife. Protect surrounding areas with impervious masking tape.

APPLICATION METHOD / TOOLS

Cut the tip of the cartridge with a sharp blade, or try the Bond It Snip Off Tool, taking care not to damage the thread. Apply using a standard sealant gun.

– Removing Silicone sealants from baths/showers:

Spread the bead over the entire area which requires treatment (use masking tape to protect surrounding areas).  Apply an amount that is at least twice the thickness of the underlying silicone. After that, repeat application if necessary. Wash off with water after 4 hours maximum.

Note: The product specifically removes silicone products. It may have a lesser effect on acrylics, GP mastics and butyl sealant.

Apply as in (a) to window panes, frames sills etc. and allow a dwell time of 10 minutes. Wash off with white spirits or water. Repeat if necessary.

LIMITATIONS

*TEST A SMALL AREA BEFORE USE. In all cases, apply a small test patch to an inconspicuous area. Leave for 2 hours min and rinse off. Check for staining/corrosion before attempting the whole job.

In addition, this product may attack nylon, certain fabrics/textiles and coloured anodised aluminium, PU coated baths  & chipped surfaces.

 

Reviews

There are no reviews yet.

Be the first to review “Everbuild Everflex Silicone Eater 100ml”

Elementlength
up to
1,5 m 		up to
2,5 m 		up to
3,5 m 		up to
4,5 m 		up to
2,5 m 		up to
3,5 m 		up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm 		Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded) 		15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright) 		10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark) 		10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

Related Products

ARBO Arbosil HM Internal Sealant 310ml


From: £3.11 inc. VAT
£2.59 ex. VAT

ARBO Arbosil HM Internal Sealant 310ml


From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

MAPESIL AC – Internal Silicone Sealants


From: £8.03 inc. VAT
£6.69 ex. VAT

MAPESIL AC – Internal Silicone Sealants


From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page
CT1

CT1 Sealant & Adhesive


From: £10.07 inc. VAT
£8.39 ex. VAT
CT1

CT1 Sealant & Adhesive


From: £10.07 inc. VAT
£8.39 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

ARBO Arbosil LM External Sealant 380ml


From: £3.11 inc. VAT
£2.59 ex. VAT

ARBO Arbosil LM External Sealant 380ml


From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

Everbuild Anti-Pick 109 295ml


From: £6.59 inc. VAT
£5.49 ex. VAT

Everbuild Anti-Pick 109 295ml


From: £6.59 inc. VAT
£5.49 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

Everbuild 825 – External Sealant 380ml


From: £3.11 inc. VAT
£2.59 ex. VAT

Everbuild 825 – External Sealant 380ml


From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

Bond-It WP100 Neutral Cure Oxime Silicone 380ml


From: £2.86 inc. VAT
£2.38 ex. VAT

Bond-It WP100 Neutral Cure Oxime Silicone 380ml


From: £2.86 inc. VAT
£2.38 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

ARBO Arbosil LM External Sealant 310ml


From: £2.69 inc. VAT
£2.24 ex. VAT

ARBO Arbosil LM External Sealant 310ml


From: £2.69 inc. VAT
£2.24 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

  • Bond-It De-Bond Mate Silicone Sealant Remover


    £3.19 inc. VAT
    £2.66 ex. VAT

    Bond-It De-Bond Mate Silicone Sealant Remover


    £3.19 inc. VAT
    £2.66 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.
    Add to basket

  • Bond-it Flash Mate Lead Sealant 310ml


    £2.94 inc. VAT
    £2.45 ex. VAT

    Bond-it Flash Mate Lead Sealant 310ml


    £2.94 inc. VAT
    £2.45 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.
    Add to basket

  • Everbuild 565 Clean Room Silicone 295ml


    £9.06 inc. VAT
    £7.55 ex. VAT

    Everbuild 565 Clean Room Silicone 295ml


    £9.06 inc. VAT
    £7.55 ex. VAT
      Everbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties.     For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit
    Add to basket

  • Everbuild Aqua Mate 295ml


    £6.78 inc. VAT
    £5.65 ex. VAT

    Everbuild Aqua Mate 295ml


    £6.78 inc. VAT
    £5.65 ex. VAT
      Everbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion.   For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
    Add to basket