Everbuild Everflex 195 Siliconised Acrylic 300ml
£2.10 inc. VAT
£1.75 ex. VAT
- Product ID: 482346
- Suitable For: sealing cracks and gaps in brickwork, stone & plaster.
- Area of use: INT
- Application Method: silicone gun
- Volume: 300ml
- Container Type: cartridge
- Type: sealant
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Everflex 195 Siliconised Acrylic Sealant is a siliconised acrylic sealant, suitable for internal and external use, that provides a permanently flexible long lasting seal which adheres to virtually all materials. Everflex 195 has a powerful fungicide to prevent mould growth and improved adhesion characteristics when compared to conventional acrylic sealants.
Advantages
– Permanently flexible.
– Adheres to most surfaces.
– Mould resistant.
– Easy cleanup.
For all other Everbuild products on our website, please click here.
Any further information you may need on Everbuild products, please visit their website here.
– PVCu profile, trim and cladding.
– Internal sealing around PVCu window and door frames.
– Sealing cracks and gaps in brickwork, stone & plaster.
– An adhesive for bonding polystyrene coving and tiles.
– An adhesive for bonding cork tiles and wood block flooring.
– Gap and crack filler prior to decorating.
APPLICATION
SUBSTRATE PREPARATION
All surfaces must be clean and dust free. Highly porous surfaces should first be primed with Everbuild PVA bond diluted 1:4 with water.
APPLICATION METHOD / TOOLS
Using a sharp knife, or the Bond-it Snip Off Tool, cut the tip of the cartridge. Take care not to damage the thread. Apply using a standard sealant gun. Ideally, the joint depth should be half of the width. Smooth down within 20 minutes of application using a wetted spatula or piece of wood. You should take care at this point not to soak the surface because this will delay drying. The product can be overpainted after 60 minutes.
CLEANING TOOLS
Any excess sealant can be cleaned away using a sponge dampened in lukewarm water.
LIMITATIONS
– Not for use in conjunction with bitumen.
– Do not attempt to abrade when cured.
– Can not be used around shower trays.
– Overpainting is not necessary. However, the product can be painted.
Note: this product is flexible. Certain inferior quality paints (especially certain vinyl matts) have minimal movement in the dry film. It is possible for the dry paint film to crack if the movement is excessive. Should not be used in a condition of continuous immersion, below ground level, in areas of high abrasion (e.g. floor joints).
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
From: £1.40 inc. VAT
£1.17 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From:
From:
From:
From: £7.45 inc. VAT
£6.21 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.