Everbuild AC50 Acoustic Sealant/Adhesive 380ml
£1.86 inc. VAT
£1.55 ex. VAT
- Product ID: 489513
- Suitable For: sealing gaps between plasterboard walls, floors and ceilings and in dry lining applications. As an adhesive to bond plasterboard to plasterboard, wood and metal studding and direct to blockwork
- Area of use: INT & EXT
- Application Method: silicone gun
- Volume: 380ml
- Container Type: cartridge
- Type: sealant
- Colour: white
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild AC50 is a permanently flexible, high strength acoustic sealant and adhesive specially formulated for sealing and bonding plasterboard and other kraft lined insulation boards to conventional substrates.
Advantages
– Everbuild AC50 is permanently flexible/high grab.
– Adheres to most surfaces.
– Mould resistant.
– Non-flammable
– Over paintable.
– Easy cleanup.
Please note, this is a non-stock item & extended lead times are advised
To shop our Everbuild range, please click here.
For further information, please visit the Everbuild website here.
– Sealing gaps between plasterboard walls, floors and ceilings and in dry lining applications.
– As an adhesive to bond plasterboard to plasterboard, wood and metal studding and direct to blockwork.
– Bonding most Kraft lined insulation boards.
SUBSTRATE PREPARATION
All surfaces must be clean and dust free. Highly porous substrates should be primed first with Everbuild PVA bond diluted 1:4 with water. Surfaces may be slightly damp, but not wet. NOTE: THIS WILL SLOW THE CURE.
APPLICATION METHOD / TOOLS
Cut nozzle to required length with a sharp blade, or try the Bond It snip Off Tool, and puncture inner membrane seal before applying.
C4 Packs can be installed with a standard sealant gun – Cut the tip of the cartridge taking care not to damage the thread. Apply nozzle and cut cleanly at an angle of 45°. Use as a sealant: Always cut nozzle to size slightly larger than the gap to be sealed. Apply to the gap, slightly overfilling and finish smooth with a caulking tool or filler knife. Clean excess sealant with a damp cloth within 30 minutes of application.
Use as an adhesive for direct bonding to large surfaces: Cut nozzle to provide a bead of approximately 9-10mm diameter and apply a continuous bead to one surface at 250-350mm centres. Apply board immediately to surface and tamp down. Provide temporary support until cured. Use as an adhesive for bonding to studding: Apply a continuous bead to studding and apply board immediately into position. Do not apply more than one board’s width of studding at one time. Provide temporary support until cured.
LIMITATIONS
– Should not be used against bituminous materials.
– Humid or damp conditions will significantly extend the cure time.
– Do not attempt to abrade when cured.
– Can not be overpainted until the product has fully cured. This will typically be 24 hours but maybe 4-5 days in damp, cold or humid conditions.
– Do not apply below 5°C.
Always use mechanical fixings for overhead boarding applications
1 review for Everbuild AC50 Acoustic Sealant/Adhesive 380ml
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Andy B. (verified owner) –
Perfect for gap filling and fitting plasterboard, especially to reduce sound leaking through. The 380 ml is a lot easier to handle and fit into awkward gaps than the 900 ml. Delivery etc was fine.