Everbuild Pyro Mate Silicone 295ml
£7.09 inc. VAT
£5.91 ex. VAT
- Product ID: 486041
- Suitable For: Sealing of joints, irregular holes & voids within firewalls, partition walls and a range of other structures
- Area of use: INT & EXT
- Application Method: silicone gun
- Volume: 295ml
- Container Type: cartridge
- Type: sealant
- Colour: white
- Brand: Everbuild
- Manufactuer: Everbuild
- Box Size: 1
Everbuild Pyro Mate Silicone is a neutral cure, elastic silicone sealant which conforms to the EN1366-4 standard for fire retardant and has a fire rating of up to 5 hours in specific joint configurations.
Advantages
– Neutral cure – Everbuild Pyro Mate adheres to most building surfaces, porous and non-porous.
– Permanently flexible.
– Excellent weathering characteristics. Therefore, it is suitable for internal and external use.
– You can use product joints up to 50mm wide and 25mm deep.
– No priming required for most construction substrates. However, for specific applications, priming may be advised.
– Everbuild Pyro Mate is easy to tool off, unlike a lot of other fire rated sealants.
– In addition, it has a long tooling time – 20-30 minutes.
– This product will not slump
For all other fire rated products on our website, please click here.
For more in our Everbuild range, please click here.
To find out more about Everbuild and their products, you can visit their website here.
– Sealing of joints, irregular holes & voids within firewalls, partition walls and a range of other structures.
– Fire rated expansion joints.
APPLICATION
SUBSTRATE PREPARATION
All surfaces must be clean & dry. Similarly, any old mastic that may be present must be removed from the surface, as with any loose or flaking surface coating.
APPLICATION METHOD / TOOLS
The surfaces to be sealed must be clean, dry and free from dust, grease and other contaminants. Priming is not required, although we always advise testing a small area if you are unsure before application.
Everbuild Firefoam B1 should be used beforehand to fill larger voids for maximum fire rating. Cut the tip of the cartridge with a sharp blade to ensure you do not damage the thread. Apply nozzle and cut at an angle with an opening slightly larger than the gap you wish to seal. After that, apply using a standard sealant gun.
To ensure a proper bond, always smooth the sealant down with a spatula or piece of wet wood.
LIMITATIONS
– Do not use on substrates that could bleed oils or plasticisers or in contact with bitumen or asphalt.
– Do not attempt to sand down. Finish smooth as per directions.
– Not overpaintable
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.45 inc. VAT
£6.21 ex. VAT
From: £2.20 inc. VAT
£1.83 ex. VAT
From: £2.06 inc. VAT
£1.72 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.