Bond-It Pro Range – Gripbond Pro Hybrid Polymer Sealant & Adhesive
- Suitable For: filling and sealing of connecting joints, cracks, holes, etc., in the building sector, and bonding metal to metal
- Area of use: preferably INT
- Application Method: silicone gun
- Time to full cure: 24 hours
- Volume: 310ml
- Container Type: cartridge
- Type: sealant
- Colour: 4 colours
- Brand: Bond-It
- Manufactuer: Bond-It
- Box Size: 1
Bond It Gripbond Pro is a high quality, one part, HM sealing and bonding material, established on advanced hybrid polymer technology. A neutral “hybrid” sealant for use in areas demanding a tough elastic rubber joint or as an adhesive with strong bonding properties.
For application guns to use with this product, click here.
For all other Bond-it products, please click here.
For any further information you may need on Bond-it, please visit their website here.
Bond It Gripbond Pro can be used:
– For filling and sealing joints, cracks, holes, etc.
– For bonding metal to metal (can absorb vibration).
– As a universal waterproof construction adhesive for bonding concrete, mirrors (note: not suitable for plastic-backed/safety mirrors), gypsum board, polycarbonates, polystyrene, PVC, many plastics, ceramics, copper, lead, zinc, aluminium, stainless steel, wood and glass.
We recommend that test areas be carried out prior to application to ensure compatibility of materials.
APPLICATION
Preparation
Make sure all surfaces are clean and grease free from other contaminants.
Application
Cut the top of the cartridge, screw on the nozzle supplied and cut at an angle approximately 45o. Apply using a standard sealant gun. When using as an adhesive, apply in beads or strips to bond the surfaces together carefully, and cure.
When using as a sealant, apply in a continuous bead and leave to fully cure. Smooth the joint and remove any excess material. Clean all tools immediately with white spirit. Replace cap afterwards.
LIMITATIONS
This product is not recommended for expansion joints or
installations where joints are immersed in water. Note: the product may yellow if curing in dark conditions. Not for use in aquariums.
Not suitable for LSE plastics such as PTFE, PP & PE. Can cause staining on marble and other stone surfaces. Using a sealer prior to application can prevent this from happening.
Do not use for double glazed units or on surfaces that bleed oils or plasticisers. When painting, always test compatibility before use, but we only recommend use of water based paints with this product. Any mirror with 6mm glass or thicker, greater than 1m squared, or on a sloping wall or ceiling, must have mechanical fixings.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
£7.97 inc. VAT
£6.64 ex. VAT -
-
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.45 inc. VAT
£6.21 ex. VAT
From: £2.20 inc. VAT
£1.83 ex. VAT
From: £2.06 inc. VAT
£1.72 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.