Cromar AlphaChem PVA Bond
- Suitable For: use in the building industry as a multi‐purpose bonding agent, an additive for concrete and plasters and as a general purpose adhesive.
- Area of use: preferably INT
- Volume: 1LTR, 5LTR, 25LTR
- Container Type: bottle
- Type: bonder
- Brand: AlphaChem
- Manufactuer: Cromar
- Box Size: 1
AlphaChem PVA Bond is a medium viscosity, polyvinyl alcohol stabilised, externally plasticised, vinyl acetate homopolymer. It has been designed specifically for use in the building industry as a multi‐purpose bonding agent, an additive for concrete and plasters and as a general-purpose adhesive.
In common with conventional PVAC bonding agents, PVA Bond can be used as a general-purpose adhesive for the building industry.
BENEFITS
• Greatly improved adhesion to a wide range of substrates, including dense concrete, glass,
• steel, tiles etc.
• Mixes may be applied in much thinner sections resistant to salt permeation.
• Reduced surface dusting of concrete
• Improves flexibility of sand cement products.
• Reduced water: cement ratio for equivalent workability
• Improved frost resistance
• Reduces surface porosity of mortar/plaster
For more information on Cromer, please visit their website here.
For our full list of adhesives, please click here. For primers and cleaners, please click here.
AlphaChem PVA Bond meets the bond strength requirements of BS5270 – “Polyvinyl acetate (PVAC) emulsion bonding agents for internal use with gypsum building plasters”.
APPLICATION
All surfaces must be sound, clean, dry and dust-free.
1. As an adhesive: For bonding wood and similar absorbent materials. Apply neat to both surfaces and press firmly together, clamp if possible and leave for 24 hours.
2. Use as plaster bonding agent: Prime surface with 1 volume PVA: 2 volumes water and allow to dry. Apply banding coat of I volume PVA: 2 volumes water, then apply plaster while bonding coat is still tacky.
3. Use as a cement admixture: Use I litre of PVA Bond per 5kg of cement or 5 litres per 25kg bag.
4. Use as sealer/ primer: For sealing wall surfaces before tiling or papering, dilute 1 volume of PVA with up to 3 volumes of water, dependent on the porosity of the surface. Apply by brush onto the surface to be sealed until suction is satisfied.
LIMITATIONS
– Not suitable for external applications. Use Alpha Chem SBR Bond.
– As the manufacturer cannot know all the uses its products may be put to, it is the user’s responsibility to determine suitability of use.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
-
£7.97 inc. VAT
£6.64 ex. VAT -
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.