- Suitable For: a latex admixture for use with NIVORAPID and PLANIPATCH.
- Area of use: INT
- Volume: 1.5KG, 3KG, 6KG
- Container Type: bottle
- Type: admixture
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 1
Latex Plus is a latex admixture for use with NIVORAPID and PLANIPATCH. When mixed together it provides fast-setting levelling/smoothing compounds, with high flexibility for interior surfaces.
CHARACTERISTICS
Latex Plus is a water dispersion of a highly flexible polymer with low viscosity. Mix with Keraquick S1 or Nivorapid in order to improve their deformability, thus improving their application and performance characteristics.
For more information about Mapei and their products, please visit their website here.
For our full Mapei range, click here. For more in our Accelerators & Admixtures range, click here.
Please be aware that this is a non stock item and lead times may vary.
• As an admixture for Keraquick S1 to ensure a high performance, fast setting, slip resistant and highly deformable adhesive. For ceramic tiles and stone.
• As an admixture for Nivorapid to gain an ultra-fast cementitious levelling compound, improving deformability and bonding strength.
APPLICATION
Preparing the substrate
Substrates must be flat, strong, free from dirt and debris and sufficiently dry. Damp substrates could slow down the setting process. Cementitious surfaces must not continue to shrink once the tiles are installed, renders should therefore be cured for at least 2 weeks. Cementitious screeds must have an totaL cure of at least 3-4 weeks. Surfaces that are too hot due to exposure should be dampened down with water. Gypsum substrates and screeds must be perfectly dry, sufficiently hard and dust free. They must be treated with either Primer G or Eco Prim T.
Preparing the mix
Pour the powder into the liquid, mixing with at low speed with an agitator. Mix until a lump-free paste is achieved. Allow the mix stand for a few minutes before briefly mixing again, then apply.
Applying the mix
Spread the mix on the surface with a notched trowel and quickly set the tiles. Press firmly to ensure the adhesive transfers. Always be careful to stay within the adhesives working time. In certain ambient conditions (high temperatures, etc) the working time may be shorter than usual.
LIMITATIONS
• Do not use in exterior works.
• Do not use on surfaces subject to damp.
• Do not use directly on anhydrite surfaces.
• Do not use Nivorapid mixed with Latex Plus underneath parquet or glued wood flooring as a levelling compound.
• When used for resilients, watch out for shadowing. If possible, use Latex Plus diluted with water.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £51.83 inc. VAT
£43.19 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.