Bond It Drive Alive All Weather Gap Joint Fill
- Suitable For: joint filling for paving joints over 5mm
- Area of use: EXT
- Application Method: broom
- Time to full cure: 24 hours
- Volume: 12kg Buff - 15kg
- Container Type: tub
- Type: filler
- Colour: 3 colours
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Bond It All Weather Gap Joint Fill is a single component joint filling system for easy and rapid pointing of paved areas. Ready-to-use on joints over 5mm and comprised of a unique blend of polymers and aggregates that chemically bind together. On exposure to the atmosphere, it forms a stable, solid mass which once cured, is unaffected by the weather. It remains permeable and allows rainwater to pass into the watercourse, reducing puddling. It eliminates the need for sand/cement pointing!
For more sealants, please click here. For other products in our grout range, click here.
For more information on Bond It and their products, you can visit their website here.
ALL WEATHER GAP JOINT FILL is ideal for pointing paving with
joints 5mm and larger and is suitable for domestic and commercial installations. It is also compatible with most types of paving, including natural stone, terracotta, clay, concrete and cobblestones. It is ideal for use on patios, pathways and open porch ways/covered areas.
This product is not suitable for:
• Areas that stay wet for long periods and rarely dry out.
• Use over non-porous sub-bases. lengthly submersion in water may
cause softening and the product to fail.
APPLICATION
Open the pack and empty the correct amount of product to treat approximately 10m2 of paving onto a plastic sheet. Using a soft broom, work the product into the joints and compact with a jointing tool. Top up the joint with more material, then sweep off any excess sweeping at a 45 degree angle to the joint. Finish off with a jointing tool to ensure a smooth finish.
Notes:
• Failure to compact the material into the joint will reduce its strength.
• Material or residues that have been exposed for more than 30 minutes should not be reused.
• Always test the product in a small area before use.
• Do not use if temperatures are likely to fall below 10C.
• Avoid use in very hot conditions as the material may cure before being fully compacted into the joint.
2 reviews for Bond It Drive Alive All Weather Gap Joint Fill
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.43 inc. VAT
£5.36 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £7.45 inc. VAT
£6.21 ex. VAT
From: £2.20 inc. VAT
£1.83 ex. VAT
From: £2.06 inc. VAT
£1.72 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Stephen Hudson (verified owner) –
David (verified owner) –
Excellent fast service.