Cromar AlphaChem Boardfix Fire Rated Foam 750ml
£8.52 inc. VAT
£7.10 ex. VAT
- Product ID: X5BOARD7
- Suitable For: bonding various construction materials including plasterboard
- Area of use: INT
- Application Method: foam gun
- Time to full cure: 30 mins
- Volume: 750ml
- Container Type: can
- Type: adhesive foam
- Colour: pale pink
- Brand: AlphaChem
- Manufactuer: Cromar
- Box Size: 1
AlphaChem Boardfix FR stands as a high-performance adhesive foam in gun grade, offering a swift and efficient approach to bonding diverse construction materials, plasterboard being one of them. Its rapid adhesive action enables plastering and wall plugging to commence within a mere hour.
Comparatively more cost-effective and lighter in composition than plaster, it brings an added layer of ease to usage and application. Notably, Boardfix holds a B3 fire rating, assuring non-combustibility.
For more in our range of Foams, please click here. For more in our range from Cromar, click here.
Alternatively, to visit Cromar’s website, please click here.
Alpha Chem Boardfix FR is suitable for:
- Excellently suited for affixing heat insulation panels and addressing gaps while applying adhesive.
- Recommended for bonding wooden construction materials to surfaces like concrete and metal.
- Ideal for scenarios requiring controlled expansion.
- Well-suited for attaching and isolating window and door frames.
Additionally, it’s worth noting that this product is environmentally responsible, devoid of any propellant gases detrimental to the ozone layer.
APPLICATION
- Ensure all surfaces are thoroughly cleaned, stable, dry, and devoid of dust, grease, or contaminants. If the surface isn’t clean, pressurized water can be used to remove dust.
- The recommended can temperature is +20°C.
- Application is viable within a temperature range of +5°C to +35°C.
- Vigorously shake the can before use, around 30 times. Repeat shaking at intervals.
- Attach the can to an AlphaChem foam applicator gun. The foam output can be managed using the trigger and adjusted with the screw on the gun’s rear side.
- For foam application, invert the can and press the trigger. Maintain control over foam output through the trigger and adjustment screw. Always keep the can upside down during application.
- Apply the foam around the board’s perimeter and then approximately every 40cm. Allow it to stand for 3-4 minutes before pressing the board against the wall. Apply even pressure across the board’s entire surface and hold it in place for roughly 1 minute. Corrections can be made within 15-20 minutes if needed. Complete curing takes around 2-3 hours.
- Fresh foam can be cleaned using AlphaChem Foam Cleaner. Mechanically cleaning is recommended for cured foam.
LIMITATIONS
- Storage outside the temperature range of +5°C to +25°C affects shelf life, also impacting foam yield and curing time due to colder temperatures.
- Proper storage and transportation involve keeping the product in a vertical position.
- To achieve optimal results, maintain the product at room temperature for at least 12 hours before application.
- Cured foam may undergo discoloration upon exposure to ultraviolet light.
- For enhanced performance in outdoor applications, consider painting or coating the cured foam.
- The user bears the responsibility of ensuring the product’s suitability for their intended use.
- Carefully review the label before usage; it contains crucial health and safety information. Additional details are available in the Safety Data Sheet, which can be requested.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £8.03 inc. VAT
£6.69 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £10.07 inc. VAT
£8.39 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £6.59 inc. VAT
£5.49 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.86 inc. VAT
£2.38 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.69 inc. VAT
£2.24 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.