- Suitable For: oversealning or repairing joints
- Area of use: INT & EXT
- Volume: 10m x 100mm x 1.5mm 10m x 150mm x 1.5mm 10m x 200mm x 1.5mm
- Type: seapling tape
- Colour: 2 colours
- Brand: Hodgson Sealants
- Manufactuer: Hodgson Sealants
Data Sheets
Hodgson Sealants Foilband is a preformed strip sealant made from synthetic rubber and affixed with a secure foil backing.
Key Features
- Excellent adherence to a diverse array of substrates.
- This product demonstrates exceptional conformability.
- The foil exhibits impressive resistance to tearing and puncturing.
- Maintains flexibility throughout its operational lifespan.
- Shows good resistance to UV exposure.
- Simple and precise application with minimal wastage and mess.
For more in our range of sealants, please click here. For application guns and tool, please click here.
For more information on Hodgson Sealants and their other products, you can visit their website here.
Hodgson Sealants Foilband is:
- Suitable for application as a flashing tape, commonly used in conservatory construction.
- Effective for sealing, over-sealing, or repairing joints in gutters and downpipes.
- Ideal for sealing over T-bars in glazing and conservatories.
- Well-suited for temporary remedial tasks, including the sealing of leaking components.
APPLICATION
Surface Preparation: Prior to application, ensure all surfaces are clean, dry, and devoid of frost, grease, and loose materials. For contaminated substrates, Hodgson recommends the use of propan-2-ol (IPA) for cleaning, allowing it to dry before applying the sealant strip. When applying the tape on porous or friable surfaces, it’s advised to treat the surface with an appropriate primer, such as an exterior-grade PVA, to seal and stabilize it.
Application: To prevent creasing of the foil, separate the foil and sealant from the backing paper while unwinding them from the roll. After application, use a roller to secure good adhesion to the substrate. Minimize seams in the flashing where possible. In cases where joints are necessary, they should overlap by a minimum of 120mm, with the uppermost piece overlapping on top of the lower strip, enabling water to run freely over the front surface of the flashing. When applying the tape on textured surfaces like pebble dash or rough brick, it’s recommended to apply a bead of Silfix® U9 Low Modulus Silicone on the top edge of the foil to prevent water from penetrating behind the strip.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £51.83 inc. VAT
£43.19 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.