Ardex AM 100 OCR Rapid Set Tile Render
£31.20 inc. VAT
£26.00 ex. VAT
- Product ID: 18463
- Suitable For: rendering properly prepared in-situ concrete walls, brickwork, and blockwork
- Area of use: INT & EXT
- Application Method: trowel
- Time to full cure: 2 hours
- Volume: 25kg
- Container Type: bag
- Type: render
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
Coverage: ARDEX AM 100 has an approximate coverage rate of 1.3 kg per square meter per millimeter of thickness. For example, a 25 kg bag of ARDEX AM 100 will cover around 3.2 square meters when applied at a thickness of 6 mm.
Storage and Shelf Life: To ensure optimal performance, ARDEX AM 100 should be stored in its unopened packaging, elevated from the ground, in a cool, dry environment, and shielded from excessive draughts. When stored under these conditions, the product has a shelf life of 12 months from the date indicated on the packaging.
For more in our range of tile adhesives, please click here. For our full range of Ardex products, click here.
Alternatively, you can visit the Ardex website by clicking here.
ARDEX AM 100 is a versatile, rapid-setting render capable of being applied in a single coat from 2mm up to 30mm in thickness. This product excels in scenarios where conventional sand and cement renders cannot meet the required drying times or thicknesses. It is suitable for rendering properly prepared in-situ concrete walls, brickwork, and blockwork. ARDEX AM 100 is ideal for both internal and external applications, including in demanding environments like swimming pools.
Surface Preparation
Ensure that all surfaces are stable and that any movement joints are carried through to the tiling surface. The areas to be rendered must be clean, firm, and free from dust, dirt, oil, grease, paint, gypsum plaster, and other contaminants that could impair adhesion. Mechanical preparation equipment may be necessary to achieve this. Allow sufficient drying time as specified in BS 5385: in-situ concrete walls, brickwork, and blockwork should be allowed to cure and shrink for at least 6 weeks. For concrete substrates, expose the aggregate surface as recommended in BS 5385. Settlement cracks should be filled with rendering mortar, though cracks caused by structural movement may not be fully resolvable. Small cracks should be cut out and widened to improve adhesion. Metal components must be protected against corrosion, and anchored reinforcements should be installed and mechanically fixed to backgrounds such as dense surfaces (e.g., glazed bricks or ceramic tiles), timber frames, old paint finishes that cannot be removed, weak surfaces, and areas above the first floor externally. All reinforcement and mesh must be secured according to the manufacturer’s instructions and/or BS 5385. Note: Proper substrate preparation is essential for ensuring the adhesion of the render mortar.
Mixing
The recommended mix ratio is approximately 3.5 parts ARDEX AM 100 powder to 1 part clean water by volume. A 25kg bag of ARDEX AM 100 requires about 5 liters of water. For slightly improved workability, an additional 0.5 liters of water per 25kg bag can be added, making a total of up to 5.5 liters per bag. Mix the ARDEX AM 100 powder with water in a clean container, stirring thoroughly until a slump-free mortar is achieved. Using an ARDEX mixing paddle with a 10mm chuck and a variable-speed electric drill makes mixing easier, or a forced action mixer can be used for larger batches. The pot life of the mixed mortar is approximately 30 minutes at 20°C, with variations depending on temperature.
Application
Apply ARDEX AM 100 at temperatures above 5°C. Start with a 1-2mm thick skim coat or bonding layer, then apply the remaining thickness (up to 30mm) while still fresh. For greater thicknesses, the material can be applied in two layers. For instance, for a total thickness of 30mm, apply a 25mm layer, allow it to set, and then apply a 5mm top layer. Always ensure that the top layer is thinner than the initial layer.
Treatments & Tiling
Depending on the porosity of the background, additional treatments such as wood floating can be performed between 40 minutes to 1 hour after application at 20°C. If needed, ARDEX waterproof coatings, such as ARDEX WPC and ARDEX S 7 PLUS, can be applied typically after 2 hours at 20°C, following the relevant product data sheets. Tiles can generally be installed as soon as 2 hours after application using an appropriate ARDEX Cement-Based Tile Adhesive. Note that these times may vary based on site conditions, with extended times at lower temperatures and shortened times at higher temperatures.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
-
-
From: £8.82 inc. VAT
£7.35 ex. VAT
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.60 inc. VAT
£3.00 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £4.21 inc. VAT
£3.51 ex. VAT
From: £3.48 inc. VAT
£2.90 ex. VAT
From: £25.50 inc. VAT
£21.25 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.