MAPEI ULTRACARE STAIN PROTECTOR .S JERRY 1LT


£49.10 inc. VAT
£40.92 ex. VAT

Checkout
  • Product ID: 0151931UKSJ
  • Suitable For: water and oil repellent
  • Area of use: INT & EXT
  • Application Method: brush/cloth
  • Volume: 1L
  • Container Type: bottle
  • Type: treatment
  • Colour: light yellow
  • Brand: Mapei
  • Manufactuer: Mapei
  • Box Size: 1

 

UltraCare Stain Protector S is designed to minimize the absorption of water, oil, and grease in various surfaces, facilitating easier maintenance and cleaning. This product is suitable for application on floors, coatings, work surfaces, kitchen tops, and bathrooms. It does not form a film on the surface, preserving the original colour and breathability of the material while providing good UV stability. UltraCare Stain Protector S dries quickly, is easy to apply, and is resistant to traffic, maintaining the anti-slip properties of the treated materials. Additionally, surfaces treated with this product can withstand light foot traffic just 2 hours after application under normal conditions (at +23°C and 50% relative humidity).

 

Key Points:

Reduces Absorption: Minimizes water, oil, and grease absorption for easier cleaning.

Versatile Use: Suitable for floors, coatings, kitchen tops, work surfaces, and bathrooms.

Preserves Material Properties: Does not form a film, maintaining original colour and breathability; offers good UV stability.

Quick Drying: Dries fast and allows light foot traffic 2 hours post-application in normal conditions.

 

 

 

For more information about Mapei and their products, please visit their website here.

For our full Mapei range, click here. For more in our range of treatments, click here.

 

 

UltraCare Stain Protector S is a solvent-based, water- and oil-repellent treatment designed to protect against stains on terracotta, brickwork, stone, marble, granite, cementine tiles, and engineered stone in both interior and exterior settings. It is specifically formulated for use on low-absorbency materials.

 

UltraCare Stain Protector S is ready to use and should be shaken well before application. Apply the product to a clean, completely dry surface in one or two coats using a brush, cloth, or fleece applicator, ensuring even coverage. Any excess wet product should be removed before it dries—typically within 5 to 10 minutes under normal conditions—using a cloth dampened with UltraCare Stain Protector S, followed by drying and wiping the surface with a clean cloth. After approximately 2 to 3 hours of drying, a new coat can be applied, following the same procedure. Avoid applying the product on surfaces that are extremely cold or hot (above 35°C or below 5°C). For cleaning treated surfaces, it is recommended to use neutral detergents, such as UltraCare Multicleaner, diluted according to the instructions in the respective Technical Data Sheet.

Reviews

There are no reviews yet.

Be the first to review “MAPEI ULTRACARE STAIN PROTECTOR .S JERRY 1LT”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £3.56 inc. VAT
£2.97 ex. VAT

From: £3.56 inc. VAT
£2.97 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £8.03 inc. VAT
£6.69 ex. VAT

From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £11.34 inc. VAT
£9.45 ex. VAT

From: £11.34 inc. VAT
£9.45 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.60 inc. VAT
£3.00 ex. VAT

From: £3.60 inc. VAT
£3.00 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.21 inc. VAT
£3.51 ex. VAT

From: £4.21 inc. VAT
£3.51 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £4.36 inc. VAT
£3.63 ex. VAT

From: £4.36 inc. VAT
£3.63 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.48 inc. VAT
£2.90 ex. VAT

From: £3.48 inc. VAT
£2.90 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

£46.56 inc. VAT
£38.80 ex. VAT

£46.56 inc. VAT
£38.80 ex. VAT

From: £8.11 inc. VAT
£6.76 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

  • £3.24 inc. VAT
    £2.70 ex. VAT

    £3.24 inc. VAT
    £2.70 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £2.83 inc. VAT
    £2.36 ex. VAT

    £2.83 inc. VAT
    £2.36 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £8.14£1.19 inc. VAT
    £6.78£0.99 ex. VAT
      ARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material.       For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here.  

  • £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT

    £3.61£1.19 inc. VAT
    £3.01£0.99 ex. VAT
      Bond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer.   PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH   BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf