Mapei Mapeguard WP Adhesive 6.65kg
£44.89 inc. VAT
£37.41 ex. VAT
- Product ID: 2857006
- Suitable For: bonding and sealing applications involving Mapeguard WP membranes
- Area of use: INT & EXT
- Application Method: brush/roller/trowel
- Volume: 6.65kg
- Container Type: tub
- Type: adhesive
- Colour: light brown
- Brand: Mapei
- Manufactuer: Mapei
- Box Size: 1
Mapeguard WP Adhesive is a two-component, rapid-drying, elastic cementitious adhesive designed for bonding and sealing applications involving Mapeguard WP membranes and their accessories. This versatile adhesive is suitable for sealing overlaps of Mapeguard WP 200 and bonding accessories such as Mapeguard ST, Mapeguard IC, Mapeguard EC, and Mapeguard PC, making it ideal for both wall and floor areas.
Key Points:
Application Versatility: Designed for bonding and sealing overlaps of Mapeguard WP 200 and its accessories, including Mapeguard ST, IC, EC, and PC.
Two-Component System: Composed of a cementitious binder-based mortar with selected aggregates, special admixtures, and synthetic polymers in water dispersion.
User-Friendly: The adhesive can be applied by brush, roller, or spraying, ensuring ease of use in various settings.
Rapid-Drying: Offers quick drying time, making it efficient for use in wall and floor installations.
For more information about Mapei and their products, please visit their website here.
For our full Mapei range, click here. For more in our range of adhesives, click here.
Mapeguard WP Adhesive is designed for various bonding and sealing applications, including overlaps of Mapeguard WP 200 and securing Mapeguard ST onto the same membrane. It is effective for bonding and sealing Mapeguard IC, Mapeguard EC, and Mapeguard PC, as well as for bonding Mapeband Easy to seal joints between adjacent sheets of Mapeguard UM 35. Additionally, it can be used to bond Mapeband Easy with Mapeguard UM 35 for waterproofing edges and corners and is suitable for bonding Drain Vertical and Drain Lateral to Mapeguard UM 35. This adhesive is appropriate for application on both wall and floor surfaces.
Preparation of the Substrate
Mapeguard WP can be applied directly onto the clean surfaces of Mapeguard WP 200, Mapeguard ST, Mapeguard IC, Mapeguard EC, Mapeguard PC, or Mapeguard UM 35.
Preparation of the Mix
To prepare the mix, pour component B (liquid) into a clean container. Gradually add component A (powder) while stirring with a mechanical mixer. The recommended mixing ratio is component A to component B at 1:0.9. Mix thoroughly for a few minutes, scraping down the sides and bottom of the container to incorporate all the powder. It’s advisable to use a mechanical mixer at low speed to avoid incorporating excess air. Manual mixing is not recommended. For increased workability, especially when applying to Mapeguard WP 200 and its special components, you can add water up to 5% of the weight of the latex used.
Application of the Mortar
Mapeguard WP Adhesive can be applied using a brush, roller, or a trowel (size no. 3). After applying the adhesive, quickly assemble the overlaps of the Mapeguard WP 200 layers and the joints between adjacent sheets of Mapeguard UM 35 sealed with Mapeband Easy. Ensure that the overlaps of the related special pieces (Mapeguard ST, Mapeguard IC, Mapeguard EC, Mapeguard PC, Drain Vertical, and Drain Lateral) are fully embedded in the adhesive to prevent air pockets. It is recommended to press the sealing band in place using the smooth side of the notched trowel without damaging the waterproofing products. Alternatively, a suitable pressure roller can be employed. Note that drying and installation times will be shorter at higher temperatures and longer at lower temperatures. The ambient temperature during installation should not drop below +5°C until final curing is achieved.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.