ARDEX K 15 HB High Build Levelling and Smoothing Compound Grey 25kg
£34.49 inc. VAT
£28.74 ex. VAT
- Product ID: 18282
- Suitable For: levelling concrete subfloors
- Area of use: INT
- Application Method: trowel
- Volume: 25KG
- Container Type: bag
- Type: concrete
- Colour: grey
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
ARDEX K 15 HB is a high-build leveling compound designed for thicknesses ranging from 5mm to a maximum of 35mm. This versatile product is ideal for rapidly leveling uneven, hard subfloors, such as concrete and other rigid bases, and can be used with primers like ARDEX P 82, ARDEX P 51, or ARDEX P 4. Comprising special cements, graded aggregates, and high-quality synthetic resins, ARDEX K 15 HB, when mixed with water, creates a fluid, pumpable mortar suitable for single-pass applications. Notably, it can be walked on in approximately 2 hours at 20°C and can receive resilient floor finishes within 24 hours. For ceramic tile installation, the surface typically requires around 4 hours to reach sufficient strength.
Key Points:
- Versatile Application: Suitable for leveling internal subfloors from 5mm to 35mm thick, ideal for concrete and rigid bases.
- Quick Drying: Walkable in about 2 hours and ready for resilient floor finishes within 24 hours.
- Cost-Effective: Allows for the incorporation of ARDEX Coarse Aggregate for significant savings on thicker applications over 20mm.
- Rapid Installation: Excellent choice for projects requiring minimal downtime before floor finishes can be installed.
For more in our range of concrete products, please click here, and for more in our range from Ardex, click here.
Alternatively, you can visit the Ardex website here.
Substrate Preparation
The surface must be hard, sound, and free from dust, dirt, and any barrier materials such as paint, lime coatings, plaster, and adhesive residues. A suitable degreaser should be used to remove contaminants like polish, wax, grease, and oil. Laitance must also be eliminated from concrete surfaces. Direct-to-earth subfloors require an effective damp proof membrane (DPM). If the DPM is missing or ineffective, consult the ARDEX DPM 1 C or ARDEX DPM 1 C R datasheet for guidance, or contact our Technical Support Team for assistance.
All surfaces must be primed: Use ARDEX P 82 or ARDEX P 4 primer for smooth, non-absorbent subfloors, such as power-floated concrete or smooth precast concrete. For porous or rough surfaces, like cement and sand screeds or scabbled concrete, ARDEX P 51 primer should be used. Refer to the Priming and Preparation Leaflet for the correct dilution rates. Note that ARDEX K 15 HB should not be applied over asphalt; consult the ARDITEX NA® or ARDEX FA 20 datasheets for advice.
Mixing and Placing
Add the powder to the required amount of clean water in a clean mixing container while stirring thoroughly until a lump-free mortar is achieved. The mixing proportions are approximately 4 to 4.25 liters of water per 25 kg bag. Use the minimum amount of water for thicker applications or in cold conditions, and ensure application occurs at temperatures above 5°C. An ARDEX mixing paddle with a 10mm chuck and a slow-speed electric drill (600-1,000 r.p.m.) is recommended for mixing. Mixed ARDEX K 15 HB should be applied within 30 minutes at 20°C; this time will extend at lower temperatures and shorten at higher temperatures. Note: ARDEX K 15 HB can be pumped using suitable floor screed mixer pump units. For pumping advice, including suitable equipment and techniques, please contact our Technical Support Team.
Application
Pour the mixed ARDEX K 15 HB onto the prepared subfloor and use a steel finishing trowel or ARDEX Pin Leveller to spread and finish the mortar. The mixed mortar will flow and self-smooth within the first 15 minutes of its 30-minute working time. Note: Depending on the thickness of the application, the inclusion of aggregate, the desired finish, and intended use, a final smoothing layer may be necessary—particularly for thin, resilient floor coverings applied over thin layers of ARDEX K 15 HB or when extra aggregate has been added. This is typically not required for coverings such as carpet, ceramic tiles, natural stone tiles, or wood blocks. Before applying a smoothing layer of ARDEX K 15, treat the surface of the ARDEX K 15 HB as a porous and absorbent subfloor.
Applications Over Underfloor Heating
Heated screeds must be installed in accordance with BS 8204 Part 1 and BS EN 1264. The underfloor heating system should be commissioned according to the manufacturer’s instructions and relevant standards. After commissioning and thermal cycling, the underfloor heating system should be set to room temperature, but not below 15°C, before installing ARDEX K 15 HB and the final floor covering. Gradually bring the heating system up to normal operating temperature to prevent rapid thermal shock and avoid wide temperature variations.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
£59.15 inc. VAT
£49.29 ex. VAT -
£55.86 inc. VAT
£46.55 ex. VAT
£55.86 inc. VAT
£46.55 ex. VAT -
-
£46.30 inc. VAT
£38.58 ex. VAT
£46.30 inc. VAT
£38.58 ex. VAT -
£28.24 inc. VAT
£23.53 ex. VAT
£28.24 inc. VAT
£23.53 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.