ARDEX A 35 MIX Pre-Blended Ultra Rapid Drying Cement for Internal Screeds Grey 25kg
£43.10 inc. VAT
£35.92 ex. VAT
- Product ID: 18289
- Suitable For: creating bonded, unbonded, and floating screeds
- Area of use: INT
- Application Method: trowel
- Volume: 25KG
- Container Type: bag
- Type: concrete
- Colour: grey
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
ARDEX A 35 MIX is a specially formulated blend of ARDEX A 35 cement and graded sand designed to create ultra-rapid drying floor screeds for internal applications. Utilizing ‘RAPIDRY FORMULA’ technology, ARDEX A 35 MIX allows for foot traffic just 3 hours after application, and both ceramic and natural stone tiles can be installed after only 24 hours, regardless of thickness. Additionally, resilient floor coverings such as carpet, vinyl, and wood can also be laid after 24 hours. This product achieves rapid strength and passes the BRE Screed (ISCR) Test in just 6 hours, surpassing the minimum compressive and tensile bending strengths typically seen in conventional cement screeds after 28 days.
Key Points
- Ultra-Rapid Drying: ARDEX A 35 MIX allows for foot traffic within 3 hours and the installation of tiles and resilient floor coverings after 24 hours.
- High Strength: It achieves rapid strength, passing the BRE Screed Test in just 6 hours, and exceeds the strength of traditional cement screeds after 28 days.
- Versatile Use: Suitable for producing bonded, unbonded, and floating screeds, as well as large repairs to existing cement/sand screeds.
- Ideal for Quick Projects: Perfect for scenarios where rapid hardening and early foot traffic are essential.
Coverage: The material requirement for ARDEX A 35 MIX is approximately 1.85 kg per square meter per millimeter of screed thickness. For example, one bag will cover about 0.5 m² at a thickness of 25 mm or approximately 0.9 m² at a thickness of 15 mm.
Storage and Shelf Life: ARDEX A 35 MIX contains a reducing agent designed to manage the level of Chromium VI when mixed. To ensure its effectiveness, the product must be stored in unopened packaging, elevated off the ground, in cool, dry conditions, and protected from excessive drafts. When stored correctly and used within 12 months of the date indicated on the packaging, the reducing agent will maintain its efficacy, ensuring that the mixed product contains no more than 0.0002% (2 ppm) soluble Chromium VI relative to the total dry weight of the cement. Using the product after the declared storage period may increase the risk of allergic reactions.
For more in our range of concrete products, please click here, and for more in our range from Ardex, click here.
Alternatively, you can visit the Ardex website here.
ARDEX A 35 MIX is designed for creating bonded, unbonded, and floating screeds in internal environments. It is also effective for substantial repairs to existing cement and sand screeds. This product is particularly well-suited for applications that demand quick hardening and early foot traffic.
Substrate Preparation – Screeding
Bonded Screed
ARDEX A 35 MIX can be applied as a bonded screed by first preparing a grouting slurry using an appropriate mixture of ARDEX P 51 Concentrated Water Based Primer & Bonding Agent diluted with an equal volume of water. To this, add ARDEX A 35 MIX Powder until a creamy consistency is achieved. This grouting slurry should then be applied to a suitably prepared concrete base, which must be hard, sound, and free from any materials that could inhibit adhesion. While the slurry is still wet and workable, the ARDEX A 35 MIX must be placed and compacted onto the base in a ‘fresh in fresh’ manner.
Unbonded Screed
For unbonded screeds, ensure the concrete slab is relatively flat and true before laying a proprietary damp proof/slip membrane. If leveling or filling is needed for uneven areas, refer to the ARDEX A 46 datasheet for localized areas and the ARDITEX NA datasheet for larger areas.
Floating Screed
For floating screeds, place a suitable damp proof or separating membrane over the insulation before applying the screed mortar. In cases where the concrete base has insufficient drying (above 75% relative humidity), is directly on the ground without a proper damp proof membrane, or is exposed to rising damp, ARDEX A 35 MIX should be installed over an effective damp proof membrane. For both unbonded and floating screeds, a proprietary damp proof/slip membrane should be installed according to BS 8204-1: 2003+A1: 2009 and BS 5385-3: 2014.
For bonded screeds, first apply ARDEX DPM 1 C or ARDEX DPM 1 C R and allow it to cure. Follow this by applying ARDEX R 3 E Moisture Tolerant Epoxy Primer, fully sand-blinding while wet, and allowing it to cure. Afterward, the surface should be swept and vacuumed clean before applying the ARDEX A 35 MIX bonding slurry. Alternatively, ARDEX A 38 MIX Pre-Blended Ultra Rapid Drying Cement may be applied directly to damp concrete using ARDEX E 100 Additive as the bonding slurry. For more technical information, refer to the ARDEX A 38 MIX datasheet or consult Technical Services.
Substrate Preparation – Screed Repairs
When repairing dry internal screeds, cut back to sound material with vertical edges. Treat the cut edges with a bonding coat made from ARDEX A 35 MIX powder mixed with ARDEX P 51, diluted with an equal volume of water until it reaches a creamy consistency. Apply ARDEX A 35 MIX onto this bonding coat while it remains wet and workable. Ensure that the mix is workable by adding up to a maximum of 2 liters of water per 25 kg bag of ARDEX A 35 MIX. To promote rapid drying and strength, do not exceed the recommended maximum water content.
Mixing
Mix ARDEX A 35 MIX to achieve a normal screed mortar consistency. When squeezed in hand, the mortar should retain its shape and leave the hand slightly moist, without forming a water film on the surface when compacted. Mixing should be done using a pan, trough, or another forced action type of mixer, as normal ‘free-fall’ mixers are unsuitable for semi-dry screed mortars. Always use clean equipment and avoid adding other cements, lime, or screed additives.
Application
The working time of the mixed mortar is approximately 1 hour at 20°C, so all steps—mixing, placing, compacting, and trowelling—must be completed without delay. Limit the amount of mortar mixed and the area to be screeded so that finishing can occur within this timeframe. For new bays laid against hardened screeds, ensure that day work joints are vertical and treated with the grouting slurry. Apply ARDEX A 35 MIX only when temperatures are above 5°C.
Application Over Underfloor Heating
After ARDEX A 35 MIX has been applied over a hot water floor system, wait three days before gradually increasing the water temperature to a flow temperature of 25°C, maintaining it for an additional three days. The maximum floor temperature can then be used and sustained for a further four days, while avoiding draughts across the screed. After this period, allow the floor to cool to room temperature (above 15°C) before installing floor coverings. Note that ARDEX A 35 MIX screeds can withstand thermal loading of up to 65°C (water temperature).
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
£26.75 inc. VAT
£22.29 ex. VAT
£26.75 inc. VAT
£22.29 ex. VAT -
£59.15 inc. VAT
£49.29 ex. VAT -
£59.15 inc. VAT
£49.29 ex. VAT
£59.15 inc. VAT
£49.29 ex. VAT -
£55.86 inc. VAT
£46.55 ex. VAT
£55.86 inc. VAT
£46.55 ex. VAT -
£45.88 inc. VAT
£38.23 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.21 inc. VAT
£3.51 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
From: £14.11 inc. VAT
£11.76 ex. VAT
From: £47.33 inc. VAT
£39.44 ex. VAT
£34.20 inc. VAT
£28.50 ex. VAT
£34.20 inc. VAT
£28.50 ex. VAT
£25.42 inc. VAT
£21.18 ex. VAT
£31.79 inc. VAT
£26.49 ex. VAT
£28.24 inc. VAT
£23.53 ex. VAT
£28.24 inc. VAT
£23.53 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.