Ardex DPM 1 C R Rapid Curing One Coat Surface Damp Proof Membrane
- Suitable For: controlling residual moisture in sound, well-compacted concrete/cement
- Area of use: INT & EXT
- Application Method: trowel
- Time to full cure: 4 hours
- Volume: 3KG 6KG 10KG
- Container Type: tin
- Type: waterproofer
- Colour: black
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
ARDEX DPM 1 C R is a rapid-drying, one-coat, two-component epoxy resin designed for fast-track installations, forming a durable damp-proof membrane with high bond strength, able to accommodate moisture readings up to 98% RH. It resists water, grease, oil, aqueous salt solutions, and dilute mineral and organic acids. Ideal for creating a damp-proof barrier, is used to suppress residual moisture in sound, well-compacted concrete slabs and cement/sand screeds with moisture readings up to 98% RH. It can also be applied in thinner layers for moisture suppression in concrete up to 92% RH and on Calcium Sulphate screeds up to 90% RH under specific conditions.
Key Points:
- One-Coat Epoxy Resin: Provides rapid drying in a single coat, ideal for fast-track installations.
- High Bond Strength and Moisture Accommodation: Creates a strong membrane that can handle moisture readings up to 98% RH.
- Resistant to Contaminants: Highly resistant to water, grease, oil, salt solutions, and dilute acids.
- Versatile Use in Moisture Management: Effective for damp-proofing concrete without an existing DPM and suppresses residual moisture in concrete and Calcium Sulphate screeds up to specified RH levels.
For more in our range of waterproofing, click here. To shop our full Ardex range, click here.
Alternatively, you can visit the Ardex website here.
ARDEX DPM 1 C R is designed to provide a damp-proof membrane or to control residual moisture in sound, well-compacted concrete slabs and cement/sand screeds with moisture levels up to 98% RH. It can be applied as a damp-proof barrier for damp concrete where there is no effective structural damp-proof membrane, protecting against ground moisture. For moisture suppression in these substrates, a thinner layer of ARDEX DPM 1 C R may be applied where readings are up to 92% RH. It is also suitable for Calcium Sulphate screeds with RH readings up to 90%, provided certain conditions are met.
Moisture Testing and Substrate Preparation:
Moisture testing should follow BS 8203 guidelines. Before application, the substrate must be hard, clean, and free of dust, laitance, and contaminants like paint, lime coatings, plaster, and adhesive residues. Any non-moisture-resistant screeds or smoothing compounds must be removed, along with any surface hardeners or curing agents that could affect adhesion. Contaminated or very smooth surfaces should be mechanically prepared, exposing a clean, sound surface for treatment. Remove dust and fines with industrial vacuum equipment. Uneven, rough, or porous surfaces may reduce ARDEX DPM 1 C R coverage, so pre-smoothing with ARDITEX NA is advised.
Calcium Sulphate Screeds:
For calcium sulphate screeds with >75% RH, ARDEX DPM 1 C R can be applied if:
- The screed manufacturer approves an epoxy DPM.
- The subfloor has an effective damp-proof membrane, with residual construction moisture only.
- The screed has cured for over 28 days and has a minimum surface tensile strength of 1.0 N/mm².
- Moisture is below 1.5% w/w or 90% RH.
- No underfloor heating or timber flooring is present. If these conditions are met, apply ARDEX DPM 1 C R at 350 microns and cover with ARDITEX NA within 4-16 hours.
Movement Joints:
Movement or structural joints should not be covered with ARDEX DPM 1 C R. These joints require a flexible, waterproof jointing system and should extend through the floor finish. Non-moving cracks should be stitched and filled with a resin before applying the DPM.
Mixing:
Components A and B are pre-measured. Add the hardener (B) to the resin (A), mixing with a spiral paddle until uniform. To reduce residue, pour some of the mixed material back into the B container, mix for 30 seconds, then return it to the main mix. Use within 20 minutes at 20°C, adjusting for temperature. At high temperatures, spread immediately to prevent heat buildup.
Application:
Apply ARDEX DPM 1 C R evenly with a V-notched trowel, then smooth the ridges with a short-pile roller. Ensure a continuous, pinhole-free film, using a wet film thickness gauge. Additional coats may be needed on porous screeds.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
£241.68 inc. VAT
£201.40 ex. VAT
£241.68 inc. VAT
£201.40 ex. VAT -
£136.40 inc. VAT
£113.67 ex. VAT -
From: £102.55 inc. VAT
£85.46 ex. VAT
From: £102.55 inc. VAT
£85.46 ex. VAT
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £3.60 inc. VAT
£3.00 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.21 inc. VAT
£3.51 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £3.48 inc. VAT
£2.90 ex. VAT
From: £14.11 inc. VAT
£11.76 ex. VAT
From: £47.33 inc. VAT
£39.44 ex. VAT
£34.20 inc. VAT
£28.50 ex. VAT
£34.20 inc. VAT
£28.50 ex. VAT
£28.24 inc. VAT
£23.53 ex. VAT
£28.24 inc. VAT
£23.53 ex. VAT
£53.38 inc. VAT
£44.48 ex. VAT
£138.05 inc. VAT
£115.04 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.