ARDEX PCT-4 Polished Concrete Topping Grey 25kg


£51.20 inc. VAT
£42.67 ex. VAT

Checkout
  • Product ID: 30583
  • Suitable For: locations where a fast-track, polished concrete surface is needed.
  • Area of use: INT
  • Application Method: trowel
  • Volume: 25KG
  • Container Type: bag
  • Type: concrete
  • Colour: grey
  • Brand: Ardex
  • Manufactuer: Ardex
  • Box Size: 1

 

ARDEX PC-T 4 is a rapid-drying, cement-based compound designed for creating polished concrete floors that are walkable in 2-3 hours and ready for polishing in just 24 hours. Suitable for internal use only, ARDEX PC-T 4 is ideal for fast-track installations in environments like retail stores, schools, and airports. It can be applied from 10mm to 50mm in thickness and up to 130mm with the addition of graded aggregate, although a minimum thickness of 15mm is recommended for optimal leveling. For thicknesses over 30mm, adding larger aggregate may be beneficial; consult ARDEX Technical Services for guidance.

 

Key Points:

  • Fast Drying: Walkable in 2-3 hours and polishable within 24 hours.
  • Internal Applications: Ideal for high-traffic areas such as retail spaces, schools, and airports.
  • Flexible Thickness: Can be applied from 10mm to 50mm, or up to 130mm with suitable aggregate.
  • Leveling Properties: Minimum 15mm application recommended for best leveling; larger aggregate can be added for thicknesses over 30mm.

 

Coverage: Approximately 1.87kg of ARDEX PC-T 4 powder per m² per mm thickness; for example, one bag covers about 1.3m² at a 10mm thickness.

Storage and Shelf Life: Store ARDEX PC-T 4 in its unopened packaging, off the ground, in cool, dry conditions, and protected from excessive air drafts. When stored as directed, the product has a shelf life of 12 months from the date indicated on the packaging.

 

 

 

For more in our range of concrete products, please click here, and for more in our range from Ardex, click here.

Alternatively, you can visit the Ardex website here.

 

 

ARDEX PC-T 4 is intended for internal applications and is suitable for environments such as retail stores, schools, airports, and any location where a fast-track, polished concrete surface is needed. This compound can be installed at thicknesses ranging from 10mm to 50mm over large areas, and up to 130mm when mixed with a suitable graded aggregate. To optimize its leveling capabilities, a minimum application thickness of 15mm is recommended. For installations exceeding 30mm, incorporating larger aggregate may be advantageous; for further details, please contact the ARDEX Technical Services Department.

 

Substrate Preparation

The substrate must be clean, hard, sound, and free from dust and other barrier materials such as paint, curing agents, laitance, and adhesive residues that may inhibit adhesion. The concrete’s surface strength must be adequate to support ARDEX PC-T 4, with a minimum surface tensile strength of 0.8 N/mm² recommended by BS 8204-3 for concrete bases intended to receive wearing or leveling screeds. Prior to mechanical preparation, use ARDEX DGR degreaser to remove contaminants like polish, wax, grease, and oil. All surfaces must be mechanically prepared using methods such as scabbling, grinding, or contained shot-blasting, and thoroughly vacuumed before priming. Weak, frost-damaged, or overwatered concrete surfaces should be prepared down to sound, solid concrete through mechanical means. Acid etching, adhesive removers, and solvents are not acceptable for cleaning the substrate, and sanding equipment is ineffective for removing curing and sealing compounds. Direct-to-earth concrete subfloors must be dry and equipped with a reliable damp-proof membrane, such as ARDEX DPM 1 C. Moisture levels should be tested using the relative humidity method in accordance with BS 8203-1 and BS 8204-1. It is important to note that any joints or cracks in the concrete base where differential movement is expected, such as movement joints, should be brought through to the finished surface. Before installation, all non-structural dormant cracks should be filled with a fully rigid resin, such as ARDEX PSRS or ARDEX EP 2000. The repair material must be sand broadcast to refusal while still fresh and allowed to cure fully before removing any excess sand. Filling dormant cracks is recommended to help prevent them from reflecting through the topping; however, if movement occurs, cracks may reappear. ARDEX cannot be held responsible for issues arising from joints, existing cracks, or new cracks that may develop after installation.

Priming

All surfaces must be primed using a sand-blinded application of ARDEX R 3 E, or for fast-track installations, ARDEX R 5 E, Solvent-Free Epoxy Primer. The primer should be applied as a complete film coating to the entire area and then broadcast with ARDEX Fine Aggregate to refusal, requiring approximately 1.5 kg/m² of sand. If ARDEX PC-T 4 is to be installed as a thicker aggregated layer, prime as previously described. Once dry and cured, re-prime the top of the aggregated layer before applying a neat layer of ARDEX PC-T 4. For additional information and application guidelines, consult the relevant product datasheet.

Mixing

Mix two bags of ARDEX PC-T 4 at a time, using a maximum of 3.75 liters of clean water per 25 kg bag. Begin by pouring the water into the mixing bucket, then add each bag of ARDEX PC-T 4 while mixing with an ARDEX Cage Whisk and a heavy-duty drill (minimum 650 rpm). Thoroughly mix for about 2 to 3 minutes until a lump-free consistency is achieved, being careful not to overwater. Yellowish foam during mixing or settling of the sand aggregate during installation may indicate overwatering.

Pumping

For large subfloors requiring leveling or thick applications, pumping is recommended. Use a pump to fill and level the area with ARDEX PC-T 4 and aggregate, bringing it within 15-20mm of the finished floor level. The topping can then be poured or pumped as a neat ARDEX PC-T 4 mix. For further assistance, please contact the ARDEX Technical Service Department.

Application

The minimum recommended application temperature is 10°C. Pour the mixed ARDEX PC-T 4 compound onto the prepared subfloor. The mixed mortar will flow during the first 10 minutes of its 30-minute working time at 20°C. Use a pin rake or gauging tool for leveling, and a spiked roller or blade for finishing. For thicker applications, mix ARDEX PC-T 4 with washed and well-graded gravel (3mm to 10mm), ensuring the aggregate size does not exceed one-third the depth of the pour. Mix ARDEX PC-T 4 with water first, then add one part aggregate by volume, mixing until the aggregate is fully coated. Avoid using screeding sand or soft building sand. If the aggregate is wet, reduce the amount of mixing water to prevent overwatering. Adding aggregate may reduce workability, so it may be necessary to apply a neat coat for a smooth surface. Allow the initial application to dry for 12-16 hours before priming and sand broadcasting. The primer should be allowed to dry before removing any excess sand and applying a neat coat of ARDEX PC-T 4. Due to the use of various natural materials in ARDEX PC-T 4, expect some shade or color variations across large pours. Use consecutive batches or blend non-consecutive batches to minimize shading and color differences.

Applications Over Underfloor Heating

ARDEX PC-T 4 can be installed over concrete that contains fully commissioned underfloor heating but should not encapsulate any heating system directly. If underfloor heating is present, it must be turned off, and the concrete or screed should be allowed to cool before installing ARDEX PC-T 4. The underfloor heating system must be commissioned in accordance with the manufacturer’s instructions and according to BS 8204 Part 1 before applying ARDEX PC-T 4.

Polishing and Finishing

ARDEX PC-T 4 wear surfaces are designed to replicate traditional polished concrete and may not appear perfectly homogeneous. The process of spreading, smoothing, and polishing can result in optical variations in the floor’s appearance, even if it is very flat. These variations are an intended effect and should be expected. For detailed instructions regarding the polishing, treatment, sealing, and maintenance of your polished concrete floor, please refer to the Installation and Maintenance Guidance document.

Drying and Hardening

The drying time for ARDEX PC-T 4 depends on site temperature, humidity conditions, and the thickness of the installation. Low substrate temperatures and high ambient humidity may extend the drying time required before processing the surface. Ensure adequate ventilation and heat to facilitate drying, but do not force dry the surface or use surface heaters.

 

Reviews

There are no reviews yet.

Be the first to review “ARDEX PCT-4 Polished Concrete Topping Grey 25kg”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £3.11 inc. VAT
£2.59 ex. VAT

From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £8.03 inc. VAT
£6.69 ex. VAT

From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £10.07 inc. VAT
£8.39 ex. VAT

From: £10.07 inc. VAT
£8.39 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.11 inc. VAT
£2.59 ex. VAT

From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £6.59 inc. VAT
£5.49 ex. VAT

From: £6.59 inc. VAT
£5.49 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.11 inc. VAT
£2.59 ex. VAT

From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £2.86 inc. VAT
£2.38 ex. VAT

From: £2.86 inc. VAT
£2.38 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £2.69 inc. VAT
£2.24 ex. VAT

From: £2.69 inc. VAT
£2.24 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

  • £3.19 inc. VAT
    £2.66 ex. VAT

    £3.19 inc. VAT
    £2.66 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £2.94 inc. VAT
    £2.45 ex. VAT

    £2.94 inc. VAT
    £2.45 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £9.06 inc. VAT
    £7.55 ex. VAT

    £9.06 inc. VAT
    £7.55 ex. VAT
      Everbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties.     For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit

  • £6.78 inc. VAT
    £5.65 ex. VAT

    £6.78 inc. VAT
    £5.65 ex. VAT
      Everbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion.   For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple