ARDEX AF 148 Pressure Sensitive Contract Adhesive 10kg
£80.76 inc. VAT
£67.30 ex. VAT
- Product ID: 39324
- Suitable For: installing all types of vinyl floorcoverings
- Area of use: INT
- Application Method: trowel
- Volume: 10KG
- Container Type: tub
- Type: adhesive
- Brand: Ardex
- Manufactuer: Ardex
ARDEX AF 148 is a versatile, water-based, solvent-free acrylic adhesive designed for installing a variety of vinyl floorcoverings in commercial and domestic spaces. It provides a high bond strength with long-lasting tack, an extended working time of up to 3 hours, and is highly resistant to biodegradation and plasticiser migration. Additionally, it meets the EMICODE “EC1 PLUS” standards for ultra-low emissions, ensuring safety and environmental compliance.
Key points:
- Extended Working Time: Offers up to 3 hours of application time, allowing for flexibility during installation.
- High Bond Strength: Provides permanent, high tack, creating a durable and secure bond.
- Eco-Friendly: Meets “EC1 PLUS” low emission standards, making it safe for indoor use.
- Wide Compatibility: Suitable for all vinyl floorcoverings and compatible with ARDEX Latex and Water-Based Levelling Compounds.
For more in our range of adhesives products, please click here, and for more in our range from Ardex, click here.
Alternatively, you can visit the Ardex website here.
ARDEX AF 148 is perfect for installing all types of vinyl floorcoverings and is compatible with ARDEX Latex and Water-Based Levelling and Smoothing Compounds, making it suitable for both commercial and residential applications.
PRIMING
Priming is typically unnecessary, but on highly absorbent surfaces, applying ARDEX P 51 Priming and Bonding Agent diluted 1:3 with cold water can help extend the adhesive’s working time and maximize coverage.
SUBSTRATE PREPARATION
Ensure the subfloor has an effective damp proof membrane and is dry, with relative humidity not exceeding 75%. If absent or above this limit, refer to the ARDEX Moisture Control brochure or consult ARDEX Technical Support for appropriate product guidance. The subfloor should be hard, clean, free of barrier materials, sound, and smooth, adhering to BS 8203 and BS 8204 standards. Remove any dust using a vacuum before applying ARDEX AF 148, as dust impacts coverage and adhesive performance. Use ARDEX Levelling Compounds on uneven floors, and ARDEX ARDURAPID A 45 for repairs up to 50mm in thickness. Joints, minor damage, and plywood imperfections can be pre-smoothed with ARDEX FEATHER FINISH. When necessary, install flooring-grade plywood (SP101) over timber bases, ensuring the underlay is at its service moisture level.
UNDERFLOOR HEATING
Follow the heating manufacturer’s instructions for commissioning underfloor heating, or refer to BS 8203 and BS 8204 if unspecified. Gradually cycle the temperature of the substrate, raising it by 5°C per day to full operating temperature, and then reducing it in the same manner. This process allows any shrinkage to occur before floorcovering installation. For moisture testing, turn off the heating system 48 hours prior; once testing is complete, stabilize room temperature to at least 15°C. Allow the floorcovering to acclimatize before installation and maintain a stable temperature for 48 hours post-installation for proper adhesive curing. Avoid heavy traffic on the floor until the adhesive has fully set, typically 48 hours at 20°C.
MIXING
ARDEX AF 148 is ready for immediate use; however, for optimal performance, thoroughly mix the adhesive to ensure even dispersion of polymers.
APPLICATION
Ensure the installation area and subfloor are kept at the recommended temperature per the floorcovering manufacturer’s guidelines and BS 8203, maintaining these conditions 48 hours before, during, and 48 hours after installation. Use a serrated trowel at a 60-degree angle to apply ARDEX AF 148 evenly across the subfloor, avoiding adhesive pooling. Allow 30-45 minutes for the adhesive to reach full tack, depending on substrate absorbency and ambient conditions. For optimal results, position the floorcovering within 180 minutes, ensuring proper alignment. Roll the floorcovering with a 68kg roller, from side to side, then end to end, to secure full adhesive contact. Avoid contaminating applied adhesive if installation is delayed, and dispose of any surplus adhesive in a separate container to prevent contamination.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
-
£94.24 inc. VAT
£78.53 ex. VAT -
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.