Everbuild Stick2 Textile Adhesive 30ml
£2.00 inc. VAT
£1.67 ex. VAT
- Product ID: 489421
- Suitable For: bonding a wide range of materials
- Area of use: INT & EXT
- Time to full cure: 15 minutes
- Volume: 30ml
- Container Type: tube
- Type: adhesive
- Colour: white
- Brand: Everbuild
- Manufactuer: Sika
- Box Size: 1
Data Sheets
Stick2 Textile Adhesive is ideal for use on a variety of materials, including: Cloth, canvas, fabric, leather, foam, sponge, paper, cardboard, stone, etc.
Substrate Preparation:
Ensure that surfaces to be bonded are clean, dry, and free from dust, grease, and other contaminants. For non-porous materials, lightly abrade the surface with sandpaper to improve adhesion.
Application Method / Tools:
Apply the adhesive sparingly to both surfaces, being careful not to apply too much. Allow both surfaces to dry for approximately 15 minutes before pressing them together. Immediately wipe off any excess adhesive using acetone, ethanol, or MEK. Avoid using below +5°C. Since the manufacturer cannot account for all potential applications, it is the user’s responsibility to determine suitability. If uncertain, contact the Technical Services Department for advice.
Limitations:
- Not suitable for use on bitumen, tar-leaching products, or areas exposed to continuous water immersion.
- Ensure both the adhesive and surfaces to be bonded are above +5°C when used in low temperatures.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £8.03 inc. VAT
£6.69 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £10.07 inc. VAT
£8.39 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £6.43 inc. VAT
£5.36 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.86 inc. VAT
£2.38 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.69 inc. VAT
£2.24 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £7.45 inc. VAT
£6.21 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.20 inc. VAT
£1.83 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.06 inc. VAT
£1.72 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.