Cromar Roofing Emulsion 25L
- Product ID: ARE/601
- Suitable For: waterproofing
- Area of use: EXT
- Application Method: brush
- Time to full cure: 24 hours
- Volume: 25L
- Container Type: jerry
- Type: bitumen
- Colour: black
- Brand: Cromar
- Manufactuer: Cromar
- Box Size: 1
Roof Waterproofing: Cromar Roofing Emulsion offers an affordable, long-lasting waterproof solution when applied under dry conditions. It is ideal for use on concrete, fibre/cement, roofing felt, mastic asphalt, corrugated iron, slates, tiles, lead, copper, and zinc to create an effective water and moisture barrier.
Metal Protection: This emulsion also protects pipes, structural steelwork, and other metallic equipment from corrosion, ensuring longevity and reliability.
Insulation: It serves as a vapour barrier for cold storage rooms, mushroom houses, and similar environments, helping to maintain optimal conditions.
Water-based, Cromar Roofing Emulsion provides a durable waterproofing treatment, best applied during dry weather conditions. Avoid use in the rain to ensure effectiveness.
Preparation
Before applying, ensure the surface is structurally sound, clean, dry, and free from contaminants like grease, rust, and dirt. If necessary, remove any organic growth (e.g., moss or lichen) using Moss & Mould Remover. If the surface remains dusty after cleaning or is covered with weathered bitumen, prime it with Cromar Bituminous Primer and allow it to dry. Any blisters in existing felt should be split, dried, re-bonded, and sealed. Address any cracks, defective upstands, or splits using Cromar Trowel Mastic. Prime porous or friable surfaces with Bituminous Primer and allow to dry.
Application
Stir well before use. Apply by brush, ensuring a minimum of two coats at 0.75 litres per m² per coat. Allow 24 hours between coats, applying each one at right angles to the previous. Cromar Roofing Emulsion can be applied to damp surfaces, but both the coating and surface must dry before the emulsion cures into a waterproof film. For enhanced strength, durability, and flexibility, reinforce the first coat with an open woven glass fibre membrane (with at least a 50mm overlap). Follow this with two additional coats of Cromar Roofing Emulsion, applied at the same coverage rate.
To extend the life of the dried coating, it’s recommended to apply a suitable decorative, solar reflective paint as a top coat. Protect the surface from rain and frost until fully cured.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.