Bond It Seal It One Coat Roof Seal Cold Weather Accelerator 1L


£5.46 inc. VAT
£4.55 ex. VAT

Checkout
  • Product ID: SLOCRSAC
  • Suitable For: ensuring a full cure of liquid membranes
  • Area of use: EXT
  • Volume: 1L
  • Container Type: bottle
  • Type: Accelerator
  • Colour: off white
  • Brand: Bond It
  • Manufactuer: Bond It
  • Box Size: 1

 

Seal It Accelerator is designed to be used with Seal It Liquid Membrane when applying in temperatures below 5°C (41°F) to ensure full cure at a normal speed of approximately 1mm per 24 hours. The mixing ratio is 1L of accelerator to 20L of Liquid Membrane, or for 5L of Liquid Membrane, add 250ml of accelerator. Mix the components thoroughly by hand with a slow-speed paddle, ensuring the accelerator is evenly distributed. Avoid mixing too quickly to prevent introducing air, which can cause pin-holing in the final coating.

 

Key Points:

  1. Ensures full cure of Seal It Liquid Membrane at temperatures below 5°C.
  2. Mixing ratio: 1L accelerator to 20L Liquid Membrane or 250ml for 5L of Liquid Membrane.
  3. Mix thoroughly by hand to avoid air bubbles and pin-holing.
  4. Easy-to-use additive that activates when stirred in, working effectively in cold weather.

 

Shelf Life: 12 months from the date of manufacture when stored in original, sealed bottles.

Storage Conditions: Store between +10°C and +25°C in the original, unopened packaging. Once mixed with ROOF SEAL, the product will begin to cure. It is recommended to use the entire tub during installation to prevent the product from skinning over or becoming lumpy if left exposed to air for too long. Keep the product protected from frost and direct sunlight.

 

 

 

For more in our range of bitumens, please click here. For our full range of products from Bond It, please click here.

For more information on Bond It and their products, you can visit their website here.

 

SEAL IT ACCELERATOR is required when applying SEAL IT ROOF SEAL liquid membrane at temperatures below +5°C (+41°F) to ensure normal curing speed (approximately 1mm per 24 hours). When using SEAL IT ACCELERATOR, mix one tin at a time and apply immediately, as the product will begin to cure in the container if left unused.

 

 

Preparation: Ensure surfaces are properly prepared according to the ROOF SEAL instructions. Bitumen coatings should be primed with SEAL IT BLEED BLOCKER primer. A separate mixing container may be needed to combine the ACCELERATOR and ROOF SEAL to avoid overspill, or you can remove a small amount of ROOF SEAL from the tin before adding the ACCELERATOR.

Mixing: The mixing ratio is 1L of ACCELERATOR to 20L of ROOF SEAL. For 5L of ROOF SEAL, add 250ml of ACCELERATOR. Shake and mix thoroughly by hand with a paddle at low speed to ensure even distribution of the ACCELERATOR. Avoid mixing too quickly to prevent introducing excess air, which can cause pin-holing in the final coat. Follow the ROOF SEAL technical data sheet for application instructions.

Drying Time: The product will cure in 2 hours and reach full hardness within 24 hours.

Limitations: ACCELERATOR is off-white in color and may slightly alter the shade of ROOF SEAL. Do not allow the product to freeze or dilute it. Be sure to read the ROOF SEAL instructions thoroughly before use.

Reviews

There are no reviews yet.

Be the first to review “Bond It Seal It One Coat Roof Seal Cold Weather Accelerator 1L”

Elementlength
up to
1,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
up to
2,5 m
up to
3,5 m
up to
4,5 m
Type of window frame material Minimum witdth of joints
for a butled mounting b in mm
Minimum witdth of joints
for a inner mounting b in mm
Hard PVC (white) 10 15 20 25 10 10 15
Hard PVC and PMMA (dark)
(colour extruded)
15 20 25 30 10 15 20
Hard PUR integral foam 10 10 15 20 10 10 15
Wood-aluminium-window 10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (bright)
10 10 15 20 10 10 15
Aluminium-plastic sandwich
frame (dark)
10 15 20 25 10 10 15
Wooden window frame 10 10 10 10 10 10 10

From: £3.11 inc. VAT
£2.59 ex. VAT

From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £8.03 inc. VAT
£6.69 ex. VAT

From: £8.03 inc. VAT
£6.69 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

From: £3.11 inc. VAT
£2.59 ex. VAT

From: £3.11 inc. VAT
£2.59 ex. VAT
Select options This product has multiple variants. The options may be chosen on the product page

£3.18 inc. VAT
£2.65 ex. VAT

£3.18 inc. VAT
£2.65 ex. VAT

£3.73 inc. VAT
£3.11 ex. VAT

£3.73 inc. VAT
£3.11 ex. VAT

£4.40 inc. VAT
£3.67 ex. VAT

£4.40 inc. VAT
£3.67 ex. VAT

  • £3.19 inc. VAT
    £2.66 ex. VAT

    £3.19 inc. VAT
    £2.66 ex. VAT
      Bond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing.     For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here.

  • £2.94 inc. VAT
    £2.45 ex. VAT

    £2.94 inc. VAT
    £2.45 ex. VAT
      Bond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant  It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional.     For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here.

  • £9.06 inc. VAT
    £7.55 ex. VAT

    £9.06 inc. VAT
    £7.55 ex. VAT
      Everbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties.     For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit

  • £6.78 inc. VAT
    £5.65 ex. VAT

    £6.78 inc. VAT
    £5.65 ex. VAT
      Everbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion.   For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple