EVERBUILD 730 Universal Flexible Grout is a high-performance cementitious grout designed for wall and floor tile joints up to 15 mm wide. Enhanced with added polymer, it provides excellent flexibility, water resistance, and a durable, water-repellent finish. Suitable for ceramic, natural stone, and porcelain tiles, it also features MouldShield® technology, offering long-lasting protection against black mould. This versatile grout is ideal for both interior and exterior applications.
Key Points:
Flexible and water-resistant with added polymer.
Fills joints from 3–15 mm w
Select options
This product has multiple variants. The options may be chosen on the product page
Arboseal GZ is a flat, preformed butyl strip that deforms under moderate pressure, offering strong surface tack and recovery. It is recommended for lap joints in roofing, cladding, and guttering, as well as for securing glazing units into timber frames and double-glazed units into externally beaded metal frames.
Key Points:
Flat, preformed butyl strip with excellent surface tack and recovery.
Suitable for lap joints in roofing, cladding, and guttering.
Ideal for securing glazing units in timber frames.
Recommended for double-glazed units in external
Select options
This product has multiple variants. The options may be chosen on the product page
DOWSIL 995 Silicone Structural Sealant is a one-part, neutral-curing silicone specifically engineered for structural bonding applications involving glass and metal in both factory and field settings. While its surface cure and cure-in-depth rates can be influenced by environmental factors such as temperature and humidity, high temperatures combined with high humidity may slow down the surface cure rate of this sealant. This elastomeric adhesive provides exceptional unprimed adhesion to most building substrates, making it particularly suitable for structural glazing applicatio
Select options
This product has multiple variants. The options may be chosen on the product page
Kerapoxy Adhesive is a high-strength, two-component epoxy resin-based mortar formulated by MAPEI, featuring silica sand and special admixtures for superior performance. When mixed, it creates a thixotropic blend that is easy to apply, even on vertical surfaces, with a single-coat thickness of up to 1 cm. This adhesive is durable, resistant to aging, and forms a strong bond with a variety of building substrates, hardening through a chemical reaction without shrinkage. Suitable for both interior and exterior applications, including underwater use, Kerapoxy Adhesive is ideal f
Select options
This product has multiple variants. The options may be chosen on the product page
Ultralite Rapid Flex S1 is a rapid-setting, flexible, low-dust adhesive with non-slip properties, ideal for installing ceramic, porcelain, and natural stone tiles on walls and floors, especially thin porcelain tiles. Developed with Mapei’s advanced Low Dust technology and more than 30% recycled materials, it offers up to 60% greater coverage than traditional adhesives, making it a sustainable, easy-to-handle option for both indoor and outdoor applications. Its lightweight, thixotropic formula ensures excellent grab on vertical surfaces, is compatible with various substrates, and ma
Select options
This product has multiple variants. The options may be chosen on the product page
Keraflex Maxi S1 is a high-performance, deformable cementitious adhesive available as a grey or white powder made from cement and fine graded sands, enriched with synthetic resins and special additives from MAPEI’s Research and Development Laboratories. It offers excellent workability, low dust, and minimal volatile organic compound emissions. When mixed with water, it creates a highly thixotropic, low-viscosity mortar suitable for bonding large ceramic, porcelain, and natural stone tiles (3-15 mm adhesive thickness) and features:
Key Points:
Excellent adhesion wi
Select options
This product has multiple variants. The options may be chosen on the product page
Ultralite S2 Quick is a one-component, high-performance, lightweight cementitious adhesive is highly deformable, rapid-setting, and hydrating, with extended open time and excellent trowel ability. It features a high wetting capacity and extremely high yield, making it ideal for bonding ceramic tiles and natural stone, especially thin porcelain tiles. It can be used on both internal and external substrates, effectively adhering to various tile types, including double-fired, single-fired, klinker, and terracotta. Additionally, it is suitable for installing mosaics, including in swimmin
Select options
This product has multiple variants. The options may be chosen on the product page
This one-component, high-performance cementitious adhesive is lightweight, highly deformable, and offers an extended open time with excellent yield. It is easy to trowel and provides good buttering capacity, making it ideal for bonding various types of ceramic tiles and stone, particularly thin porcelain tiles. Suitable for both internal and external applications, it excels in large surface areas and is specifically designed to accommodate large-sized tiles without the need for double buttering. Its high buttering capacity ensures effective adhesion for thin porcelain tiles, even on
Select options
This product has multiple variants. The options may be chosen on the product page
KeraFlex is a cement-based powder, available in grey or white, containing synthetic resins and special additives formulated by MAPEI's R&D labs. When mixed with water, it forms a highly workable, thixotropic mortar that can be applied on vertical surfaces without slumping or tile slipping, even with heavy tiles. It offers excellent adhesion to typical building materials, hardens with minimal shrinkage, and is resistant to water and frost. Additionally, it has an extended open time for ease of application. Tiling done with KeraFlex should be protected from rain, frost, and strong
Select options
This product has multiple variants. The options may be chosen on the product page
Nivoplan is a versatile grey or white powder made from cement, selected aggregates, and special synthetic resins, designed for easy application on vertical surfaces using a trowel or rendering spraying machine. The bonding requirements depend on the substrate's porosity and the desired finish. To enhance its bonding properties, Planicrete can be added during mixing (1-2 litres per bag) as a partial replacement for water, which is especially crucial for thin applications over concrete or when the render will be covered with tiles or natural stone. As a normal-setting Portland-based pr
Select options
This product has multiple variants. The options may be chosen on the product page
Adesilex P9 Express is a powdered adhesive available in white or grey, composed of a unique blend of special cement, graded aggregates, synthetic resin, and set accelerators, enabling it to establish a strong bond within just 3-4 hours after application. This quick setting time allows floor and wall coverings to be used almost immediately, with floors ready for foot traffic in just 4 hours and usable after 24 hours. Once cured, Adesilex P9 Express offers excellent resistance to freezing conditions and water. When mixed with water, it creates a mortar characterized by good workability
Select options
This product has multiple variants. The options may be chosen on the product page
Adesilex P9 is a grey or white powder made from cement, fine-graded aggregates, synthetic resins, and special additives developed in MAPEI's Research and Development Laboratories. When mixed with water, it creates a mortar that is easily workable and highly thixotropic, allowing for vertical application without sagging or slipping, even with heavy tiles. It offers excellent adherence to various building materials and hardens with minimal shrinkage. Additionally, Adesilex P9 features an extended open time and is resistant to water and frost.
Key Points:
Adesilex P9 is
Select options
This product has multiple variants. The options may be chosen on the product page
£6.39 ex. VATEVERBUILD 730 Universal Flexible Grout is a high-performance cementitious grout designed for wall and floor tile joints up to 15 mm wide. Enhanced with added polymer, it provides excellent flexibility, water resistance, and a durable, water-repellent finish. Suitable for ceramic, natural stone, and porcelain tiles, it also features MouldShield® technology, offering long-lasting protection against black mould. This versatile grout is ideal for both interior and exterior applications. Key Points: Flexible and water-resistant with added polymer. Fills joints from 3–15 mm wSelect options This product has multiple variants. The options may be chosen on the product page
£6.73 - £18.55 ex. VATArboseal GZ is a flat, preformed butyl strip that deforms under moderate pressure, offering strong surface tack and recovery. It is recommended for lap joints in roofing, cladding, and guttering, as well as for securing glazing units into timber frames and double-glazed units into externally beaded metal frames. Key Points: Flat, preformed butyl strip with excellent surface tack and recovery. Suitable for lap joints in roofing, cladding, and guttering. Ideal for securing glazing units in timber frames. Recommended for double-glazed units in externalSelect options This product has multiple variants. The options may be chosen on the product page
£26.07 ex. VATDOWSIL 995 Silicone Structural Sealant is a one-part, neutral-curing silicone specifically engineered for structural bonding applications involving glass and metal in both factory and field settings. While its surface cure and cure-in-depth rates can be influenced by environmental factors such as temperature and humidity, high temperatures combined with high humidity may slow down the surface cure rate of this sealant. This elastomeric adhesive provides exceptional unprimed adhesion to most building substrates, making it particularly suitable for structural glazing applicatioSelect options This product has multiple variants. The options may be chosen on the product page
£76.65 ex. VATKerapoxy Adhesive is a high-strength, two-component epoxy resin-based mortar formulated by MAPEI, featuring silica sand and special admixtures for superior performance. When mixed, it creates a thixotropic blend that is easy to apply, even on vertical surfaces, with a single-coat thickness of up to 1 cm. This adhesive is durable, resistant to aging, and forms a strong bond with a variety of building substrates, hardening through a chemical reaction without shrinkage. Suitable for both interior and exterior applications, including underwater use, Kerapoxy Adhesive is ideal fSelect options This product has multiple variants. The options may be chosen on the product page
