EVERBUILD XL FIRE CEMENT is a ready-mixed blend of thermosetting resins and inorganic fillers that cures when exposed to heat, forming a mortar resistant to temperatures up to 1250°C. It is ideal for both domestic and commercial applications, including use on fire bricks, fire grates, flue pipes, flue bricks, boilers, and other areas subject to extreme heat. This product offers excellent adhesion to fire bricks, blockwork, stone, and clayware, and is asbestos-free.
Key Points:
Easy to apply by trowel
Excellent adhesion to fire bricks, blockwork, ston
Select options
This product has multiple variants. The options may be chosen on the product page
EVERBUILD KOS FIRE CEMENT is a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat, forming a seal resistant to temperatures up to 1250°C. It is ideal for fixing and repairing fire backings, providing excellent adhesion to fire bricks, blockwork, stone, and clayware. This fire cement is easy to apply by trowel, asbestos-free, and suitable for both domestic and industrial use.
Key Points:
Temperature resistant up to 1250°C.
Ideal for fixing and repairing fire backings.
Excellent adhesion to fi
Select options
This product has multiple variants. The options may be chosen on the product page
Cromar AlphaChem Mortar Mix is a high-quality 2-component mixture, consisting of 2 parts Ordinary Portland cement and 1 part fine red building sand. When combined, these components create an ideal mix for brick laying, pointing, patching, rendering, and general repairs, offering excellent workability without the need for additional additives. As part of the AlphaChem Small Bag range, it is perfect for smaller projects, reducing wastage and ensuring freshness thanks to its plastic-sealed packaging.
Key points:
Composition: A 2-part mixture of Ordinary Portland cement
The use of ARDEX E 25 Mortar Admix in conjunction with ARDEX sub-floor smoothing compounds is advisable in specific situations: when high abrasion or point load resistance is necessary, for temporary wearing surfaces, when a floor paint or thick coating will be applied later (ensure compatibility and conduct a trial application), and when the floor has underfloor heating. For floors with underfloor heating, it is essential to turn off the heating for 48 hours before applying the screed, leave it off for another 48 hours after application, and then gradually increase the temperature.
ARDEX F 5 is a brilliant white, cementitious, MICROTEC fiber-reinforced fairing coat and lightweight repair mortar designed for versatile internal and external use. It is ideal for edge repairs, filling cavities, cracks, gaps, and holes, as well as for patchwork and repairs on vertical and overhead surfaces. ARDEX F 5 is also excellent for smoothing internal walls and ceilings in preparation for paints, clear protective coats, mineral renders, silicone, and other finishes. Additionally, it can be applied to external facades and shop fronts for effective, long-lasting repairs
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX A 18 is a green powder containing aggregates and specialized additives that, when mixed with water, forms a slurry ideal for bonding ARDEX Screed Cements. This bonding slurry changes color as it dries, allowing users to easily see when it’s ready to receive the screed cement.
Key Points:
Purpose: Designed specifically for creating bonding slurries for concrete and cement/sand screeds.
Applications: Suitable for both indoor and outdoor projects, including swimming pools.
Versatility: Ideal for joining daywork joints when adding new screed to an existing
ARDEX A 38 MIX is a specially formulated blend of ARDEX A 38 cement and graded sands, designed for ultra-rapid drying floor screeds in both internal and external locations. Featuring the innovative ‘RAPIDRY PLUS FORMULA’ Technology, this screed allows for foot traffic just 3 hours post-application, and enables the installation of ceramic and natural stone tiles within 4 hours, regardless of thickness, making it perfect for fast-track tiling projects. Resilient floor coverings like carpet, vinyl, and wood can be laid after 48 hours. With rapid strengthening capabilities, ARDEX A 3
ARDEX A 125 is a grey, cement-based finishing render and repair mortar that effectively addresses surface imperfections, voids, and damage. When mixed with water, it forms a slump-free mortar that dries to a durable, water-resistant finish with a smooth and dense surface ideal for painting.
Key Points:
Versatile Application: Suitable for leveling and smoothing irregularities on vertical and overhead surfaces like concrete, brickwork, blockwork, and existing cement/sand renders.
Durable Finish: Produces a hard-wearing surface that can be left exposed or painted, m
ARDEX E 100 is an acrylic-based dispersion designed for enhancing screeding and rendering mortars for both internal and external applications. By incorporating ARDEX E 100, the compressive and tensile strengths, elasticity, and bond strength of modified mortars are significantly improved, while workability and plastic properties are enhanced without increasing the water/cement ratio. Additionally, ARDEX E 100 effectively reduces the formation of early-age cracks. It is also suitable for use in bonding slurries and grout mixtures with ARDEX A38 Rapid Hardening and Drying Cement for fl
ARDEX PSRS is a solvent-free, two-component epoxy resin with ultra-low viscosity, specifically designed for strengthening and restoring poorly compacted and low-strength screeds that fail to meet the required in-situ crushing resistance value. This product effectively penetrates defective screeds, filling voids created by inadequate compaction and consolidating loose particles. Once cured, the resin-filled substrate delivers a high-strength screed that achieves the highest soundness category as defined in BS 8204-1 for in-situ crushing resistance. ARDEX PSRS is particularly beneficia
ARDEX ARDURAPID A 45 is a fast-drying, slump-free mortar ideal for a range of internal repairs. This mortar sets in 15 minutes and can be walked on within 90 minutes at 20°C, regardless of application thickness. It is suitable for re-profiling and repairing concrete surfaces, filling cracks, making good around pipework and frames, and forming ramps and coves. When used as a wearing surface, ARDEX ARDURAPID A 45 requires a suitable protective coating.
Key Points:
Rapid Setting and Hardening: Sets in 15 minutes, allowing foot traffic after 90 minutes at 20°C.
Ver
Kerapoxy Adhesive is a high-strength, two-component epoxy resin-based mortar formulated by MAPEI, featuring silica sand and special admixtures for superior performance. When mixed, it creates a thixotropic blend that is easy to apply, even on vertical surfaces, with a single-coat thickness of up to 1 cm. This adhesive is durable, resistant to aging, and forms a strong bond with a variety of building substrates, hardening through a chemical reaction without shrinkage. Suitable for both interior and exterior applications, including underwater use, Kerapoxy Adhesive is ideal f
Select options
This product has multiple variants. The options may be chosen on the product page
£1.45 - £8.60 ex. VATEVERBUILD XL FIRE CEMENT is a ready-mixed blend of thermosetting resins and inorganic fillers that cures when exposed to heat, forming a mortar resistant to temperatures up to 1250°C. It is ideal for both domestic and commercial applications, including use on fire bricks, fire grates, flue pipes, flue bricks, boilers, and other areas subject to extreme heat. This product offers excellent adhesion to fire bricks, blockwork, stone, and clayware, and is asbestos-free. Key Points: Easy to apply by trowel Excellent adhesion to fire bricks, blockwork, stonSelect options This product has multiple variants. The options may be chosen on the product page
£1.62 - £34.87 ex. VATEVERBUILD KOS FIRE CEMENT is a ready-mixed blend of thermo-setting resins and temperature-resistant inorganic fillers that cures when exposed to heat, forming a seal resistant to temperatures up to 1250°C. It is ideal for fixing and repairing fire backings, providing excellent adhesion to fire bricks, blockwork, stone, and clayware. This fire cement is easy to apply by trowel, asbestos-free, and suitable for both domestic and industrial use. Key Points: Temperature resistant up to 1250°C. Ideal for fixing and repairing fire backings. Excellent adhesion to fiSelect options This product has multiple variants. The options may be chosen on the product page
£3.29 ex. VATCromar AlphaChem Mortar Mix is a high-quality 2-component mixture, consisting of 2 parts Ordinary Portland cement and 1 part fine red building sand. When combined, these components create an ideal mix for brick laying, pointing, patching, rendering, and general repairs, offering excellent workability without the need for additional additives. As part of the AlphaChem Small Bag range, it is perfect for smaller projects, reducing wastage and ensuring freshness thanks to its plastic-sealed packaging. Key points: Composition: A 2-part mixture of Ordinary Portland cement
£46.59 ex. VATThe use of ARDEX E 25 Mortar Admix in conjunction with ARDEX sub-floor smoothing compounds is advisable in specific situations: when high abrasion or point load resistance is necessary, for temporary wearing surfaces, when a floor paint or thick coating will be applied later (ensure compatibility and conduct a trial application), and when the floor has underfloor heating. For floors with underfloor heating, it is essential to turn off the heating for 48 hours before applying the screed, leave it off for another 48 hours after application, and then gradually increase the temperature.
