Elastorapid is a two-component adhesive, available in grey or white, that combines a special binder and selected silica sand (component A) with synthetic latex rubber (component B). When mixed, it forms a mortar that is easy to apply due to its low viscosity and high thixotropic properties, allowing it to be used on vertical surfaces without sagging, making it suitable for large, heavy tiles that can be laid from the top without spacers. This adhesive boasts an extended pot life compared to other fast-setting adhesives, facilitating application even in high summer temperatures. Addit
KeraFlex is a cement-based powder, available in grey or white, containing synthetic resins and special additives formulated by MAPEI's R&D labs. When mixed with water, it forms a highly workable, thixotropic mortar that can be applied on vertical surfaces without slumping or tile slipping, even with heavy tiles. It offers excellent adhesion to typical building materials, hardens with minimal shrinkage, and is resistant to water and frost. Additionally, it has an extended open time for ease of application. Tiling done with KeraFlex should be protected from rain, frost, and strong
Select options
This product has multiple variants. The options may be chosen on the product page
Mapecem Pronto is a pre-blended, ready-to-use, quick-setting and drying mortar made with a special hydraulic binder, admixtures, and selected aggregates, designed to be mixed only with water. This simplifies its use by eliminating the risk of errors in dosing binders or selecting aggregates, ensuring consistent screed quality. It is especially useful where finding high-quality aggregates is difficult or in areas like historical town centres, where transporting and preparing traditional binders is problematic.
Key Points:
Pre-blended, ready-to-use mortar mixed only wit
Rapid Level CT 3220 is a fast setting smoothing and levelling compound designed for both new and existing floors in commercial and domestic settings. This grey powder, composed of special cements, graded silica sands, resins, and unique additives developed in MAPEI's R&D laboratories, becomes a highly fluid and workable mortar when mixed with water. Rapid Level CT 3220 allows for trowel application and can be laid in thicknesses ranging from 3 to 20 mm in a single coat, making it ideal for a variety of flooring projects. Notably, it is compatible with underfloor and under-tile he
Topcem is a specialized hydraulic binder that, when combined with graded aggregates and water, creates mortars that harden in about 24 hours and dry within approximately 4 days. It is ideal for forming bonded, unbonded, and floating screeds on both new and existing concrete surfaces, facilitating the quick installation of various flooring materials, including PVC, linoleum, ceramic tiles, natural stone, carpet, or timber. Topcem is suitable for both indoor and outdoor applications, making it a versatile choice for projects that require rapid drying times.
Key Points:
Select options
This product has multiple variants. The options may be chosen on the product page
Mapestone TFB 60 is a pre-blended mortar consisting of specialized binders, selected aggregates with a maximum size of 3 mm, and specific additives, making it highly durable and suitable for installation screeds. This mortar is designed to withstand freezing weather and de-icing salts, offering exceptional strength and resistance to harsh environmental conditions. It is easy to use, requiring only water for mixing, which eliminates potential dosing errors related to the binder and aggregates that could compromise the performance of the final product. Mapestone TFB 60 can be prepared
Topcem Pronto is a pre-blended, ready-to-use mortar formulated with a special hydraulic binder and graded aggregates, designed for normal setting and controlled shrinkage. This product simplifies the mixing process by requiring only the addition of water, which eliminates the risk of errors associated with the proportions of binder and aggregates, thus ensuring optimal performance once cured. Topcem Pronto is particularly beneficial in areas where sourcing quality graded aggregates is challenging, such as urban job sites where traditional mixing logistics can be complicated. It offer
Adesilex P9 Express is a powdered adhesive available in white or grey, composed of a unique blend of special cement, graded aggregates, synthetic resin, and set accelerators, enabling it to establish a strong bond within just 3-4 hours after application. This quick setting time allows floor and wall coverings to be used almost immediately, with floors ready for foot traffic in just 4 hours and usable after 24 hours. Once cured, Adesilex P9 Express offers excellent resistance to freezing conditions and water. When mixed with water, it creates a mortar characterized by good workability
Select options
This product has multiple variants. The options may be chosen on the product page
Adesilex P9 is a grey or white powder made from cement, fine-graded aggregates, synthetic resins, and special additives developed in MAPEI's Research and Development Laboratories. When mixed with water, it creates a mortar that is easily workable and highly thixotropic, allowing for vertical application without sagging or slipping, even with heavy tiles. It offers excellent adherence to various building materials and hardens with minimal shrinkage. Additionally, Adesilex P9 features an extended open time and is resistant to water and frost.
Key Points:
Adesilex P9 is
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX Indortec Flexbone Matting – VA is a robust, waterproof uncoupling membrane designed to handle high loads and accommodate lateral movements in tile installations on floors with restricted movement. This matting is particularly effective in mitigating tension stresses between the substrate and the installed floor, thus preventing reflective cracking that can arise from shrinkage cracks, board joints, and lateral shifts. It provides essential crack bridging, making it suitable for challenging substrates and ensuring a secure and stable installation.
Key Poin
ARDEX A 35 is a cutting-edge floor screed designed to offer ultra-rapid drying capabilities for internal environments. Leveraging the innovative ‘RAPIDRY FORMULA’ Technology, ARDEX A 35 enables impressive early traffic and installation times. Once applied, the screed can be walked on in just 3 hours. Ceramic and natural stone tiles can be installed within 24 hours, regardless of the screed’s thickness, and resilient floorcoverings, such as carpet, vinyl, and wood, can also be laid after 24 hours. The screed’s exceptional performance is demonstrated by its ability to p
ARDEX A 29 is a specialized cement designed for creating rapid-hardening floor screeds suitable for both internal and external applications. This innovative screed allows for the installation of ceramic tiles as soon as 24 hours after application, while natural stone and resilient floor coverings can be installed within 7 days. Ideal for a range of screeding needs, ARDEX A 29 can be used to produce bonded, unbonded, and floating screeds. When mixed at a ratio of 1:7, it meets the demands of most standard screeding situations and has been tested to pass the BRE Screed (ISCR) criteria
£36.58 ex. VATElastorapid is a two-component adhesive, available in grey or white, that combines a special binder and selected silica sand (component A) with synthetic latex rubber (component B). When mixed, it forms a mortar that is easy to apply due to its low viscosity and high thixotropic properties, allowing it to be used on vertical surfaces without sagging, making it suitable for large, heavy tiles that can be laid from the top without spacers. This adhesive boasts an extended pot life compared to other fast-setting adhesives, facilitating application even in high summer temperatures. Addit
£21.95 - £23.04 ex. VATKeraFlex is a cement-based powder, available in grey or white, containing synthetic resins and special additives formulated by MAPEI's R&D labs. When mixed with water, it forms a highly workable, thixotropic mortar that can be applied on vertical surfaces without slumping or tile slipping, even with heavy tiles. It offers excellent adhesion to typical building materials, hardens with minimal shrinkage, and is resistant to water and frost. Additionally, it has an extended open time for ease of application. Tiling done with KeraFlex should be protected from rain, frost, and strongSelect options This product has multiple variants. The options may be chosen on the product page
£26.53 ex. VATMapecem Pronto is a pre-blended, ready-to-use, quick-setting and drying mortar made with a special hydraulic binder, admixtures, and selected aggregates, designed to be mixed only with water. This simplifies its use by eliminating the risk of errors in dosing binders or selecting aggregates, ensuring consistent screed quality. It is especially useful where finding high-quality aggregates is difficult or in areas like historical town centres, where transporting and preparing traditional binders is problematic. Key Points: Pre-blended, ready-to-use mortar mixed only wit
£20.05 ex. VATRapid Level CT 3220 is a fast setting smoothing and levelling compound designed for both new and existing floors in commercial and domestic settings. This grey powder, composed of special cements, graded silica sands, resins, and unique additives developed in MAPEI's R&D laboratories, becomes a highly fluid and workable mortar when mixed with water. Rapid Level CT 3220 allows for trowel application and can be laid in thicknesses ranging from 3 to 20 mm in a single coat, making it ideal for a variety of flooring projects. Notably, it is compatible with underfloor and under-tile he
