ARDEX E 100 is an acrylic-based dispersion designed for enhancing screeding and rendering mortars for both internal and external applications. By incorporating ARDEX E 100, the compressive and tensile strengths, elasticity, and bond strength of modified mortars are significantly improved, while workability and plastic properties are enhanced without increasing the water/cement ratio. Additionally, ARDEX E 100 effectively reduces the formation of early-age cracks. It is also suitable for use in bonding slurries and grout mixtures with ARDEX A38 Rapid Hardening and Drying Cement for fl
ARDEX PSRS is a solvent-free, two-component epoxy resin with ultra-low viscosity, specifically designed for strengthening and restoring poorly compacted and low-strength screeds that fail to meet the required in-situ crushing resistance value. This product effectively penetrates defective screeds, filling voids created by inadequate compaction and consolidating loose particles. Once cured, the resin-filled substrate delivers a high-strength screed that achieves the highest soundness category as defined in BS 8204-1 for in-situ crushing resistance. ARDEX PSRS is particularly beneficia
ARDEX ARDURAPID A 45 is a fast-drying, slump-free mortar ideal for a range of internal repairs. This mortar sets in 15 minutes and can be walked on within 90 minutes at 20°C, regardless of application thickness. It is suitable for re-profiling and repairing concrete surfaces, filling cracks, making good around pipework and frames, and forming ramps and coves. When used as a wearing surface, ARDEX ARDURAPID A 45 requires a suitable protective coating.
Key Points:
Rapid Setting and Hardening: Sets in 15 minutes, allowing foot traffic after 90 minutes at 20°C.
Ver
ARDEX SD-T B base mix is specifically formulated to pre-level concrete surfaces before the application of ARDEX K 80. This Industrial Floor System combines durability, low maintenance, and ease of application with the innovative ARDEX ‘Rapidry Formula,’ which chemically binds the mixed water, enabling the product to dry quickly while developing strength. When thick applications are needed, ARDEX SD-T B can be applied at depths ranging from 6mm to 50mm to achieve a level base, and it allows for a minimum thickness of 5mm of ARDEX K 80 to be applied just hours after its application
ARDEX A 35 MIX is a specially formulated blend of ARDEX A 35 cement and graded sand designed to create ultra-rapid drying floor screeds for internal applications. Utilizing 'RAPIDRY FORMULA' technology, ARDEX A 35 MIX allows for foot traffic just 3 hours after application, and both ceramic and natural stone tiles can be installed after only 24 hours, regardless of thickness. Additionally, resilient floor coverings such as carpet, vinyl, and wood can also be laid after 24 hours. This product achieves rapid strength and passes the BRE Screed (ISCR) Test in just 6 hours, surpassing the
ARDEX K 80 is a specially designed cement-based compound ideal for resurfacing and leveling existing concrete floors, providing a hard, smooth, and flat surface suitable for various paint and resin coatings. This product works seamlessly with the ARDEX SD-T B base mix, which pre-levels concrete surfaces before applying ARDEX K 80. Featuring the innovative ARDEX "Rapidry Formula," this industrial floor system combines toughness, low maintenance, ease of application, and high durability. The unique formula allows ARDEX K 80 to chemically bind the mixed water, enabling it to d
ARDEX K 15 HB is a high-build leveling compound designed for thicknesses ranging from 5mm to a maximum of 35mm. This versatile product is ideal for rapidly leveling uneven, hard subfloors, such as concrete and other rigid bases, and can be used with primers like ARDEX P 82, ARDEX P 51, or ARDEX P 4. Comprising special cements, graded aggregates, and high-quality synthetic resins, ARDEX K 15 HB, when mixed with water, creates a fluid, pumpable mortar suitable for single-pass applications. Notably, it can be walked on in approximately 2 hours at 20°C and can receive resilient floor fi
ARDEX K 15 is a heavy-duty, rapid-drying, self-leveling smoothing compound that is pumpable and designed for efficient leveling and smoothing of various internal subfloors. Thanks to its unique rapid-drying properties, floorcoverings can be applied as quickly as 4 hours after ARDEX K 15 is laid. This product is ideal for leveling and smoothing uneven internal surfaces in a single application, including concrete, cement/sand screeds, porcelain, ceramic, quarry tiles, and anhydrite screeds, before floorcovering installation. It’s commonly used to correct issues like uneven or damaged
ARDEX K 11 is a rapid hardening, free-flowing leveling and smoothing compound specifically designed to address a variety of sub-floor types, including cement/sand screeds, gypsum screeds, and concrete. This versatile product can be applied in a single layer up to a maximum thickness of 10mm, while still maintaining its excellent free-flowing properties even at thinner applications of just 2mm. Ideal for preparing uneven internal sub-floors before installing various floor coverings, ARDEX K 11 dries to a virtually tension-free layer. Under optimal conditions at 20°C, it allows for th
Mapecolor Metallic is a high-quality powder pigment designed to create a stunning metallic effect for grouts. Available in pre-dosed sachets of 90 g (equivalent to 3% by weight of a 3 kg drum of Kerapoxy Easy Design), it comes in various shades including Moonlight (similar to platinum), Sahara (similar to gold), Shining (similar to silver), Red Clay (similar to copper), and Stardust (similar to dark silver). When mixed properly, it produces metallic grouts with an attractive finish that enhances the overall aesthetic with a bright, glossy, and decorative result. To achieve a uniform
Select options
This product has multiple variants. The options may be chosen on the product page
Mapeproof Swell is a one-component hydrophilic paste designed for repair and waterproofing tasks. It can be applied to damp or uneven surfaces and is effective at any temperature, even when water is infiltrating or seeping through. Upon contact with water, Mapeproof Swell expands in volume and can withstand significant hydrostatic pressure when properly confined. It adheres well to slightly damp surfaces, provided they are clean and stable. This single-component hydro-expansive paste is supplied in cartridges and is specifically formulated to create flexible, waterproof seals in crac
Kerapoxy Adhesive is a high-strength, two-component epoxy resin-based mortar formulated by MAPEI, featuring silica sand and special admixtures for superior performance. When mixed, it creates a thixotropic blend that is easy to apply, even on vertical surfaces, with a single-coat thickness of up to 1 cm. This adhesive is durable, resistant to aging, and forms a strong bond with a variety of building substrates, hardening through a chemical reaction without shrinkage. Suitable for both interior and exterior applications, including underwater use, Kerapoxy Adhesive is ideal f
Select options
This product has multiple variants. The options may be chosen on the product page
£56.06 ex. VATARDEX E 100 is an acrylic-based dispersion designed for enhancing screeding and rendering mortars for both internal and external applications. By incorporating ARDEX E 100, the compressive and tensile strengths, elasticity, and bond strength of modified mortars are significantly improved, while workability and plastic properties are enhanced without increasing the water/cement ratio. Additionally, ARDEX E 100 effectively reduces the formation of early-age cracks. It is also suitable for use in bonding slurries and grout mixtures with ARDEX A38 Rapid Hardening and Drying Cement for fl
£191.09 ex. VATARDEX PSRS is a solvent-free, two-component epoxy resin with ultra-low viscosity, specifically designed for strengthening and restoring poorly compacted and low-strength screeds that fail to meet the required in-situ crushing resistance value. This product effectively penetrates defective screeds, filling voids created by inadequate compaction and consolidating loose particles. Once cured, the resin-filled substrate delivers a high-strength screed that achieves the highest soundness category as defined in BS 8204-1 for in-situ crushing resistance. ARDEX PSRS is particularly beneficia
£20.86 ex. VAT
£31.95 ex. VATARDEX SD-T B base mix is specifically formulated to pre-level concrete surfaces before the application of ARDEX K 80. This Industrial Floor System combines durability, low maintenance, and ease of application with the innovative ARDEX ‘Rapidry Formula,’ which chemically binds the mixed water, enabling the product to dry quickly while developing strength. When thick applications are needed, ARDEX SD-T B can be applied at depths ranging from 6mm to 50mm to achieve a level base, and it allows for a minimum thickness of 5mm of ARDEX K 80 to be applied just hours after its application
