Concrete

Filter Your Product

Colour -

Product Type -

£1£9871248494741987

Product categories -

Colour -

Product Type -

£1£9871248494741987

Product categories -

  • £17.50 ex. VAT
      Mapetherm AR1 GG is a one component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems. A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories.   To reinforce this, apply Mapetherm Net on top of this base coat render. The Silancolor Render System can then be applied on top. Mapetherm AR1 GG is ideal for use on insulation or render carrier board.
  • £19.18 ex. VAT
      Bond It Tarmac Restorer is a ready-to-use, water-based coating for tarmac drives and pathways, designed to restore colour, reduce water penetration, and protect from dirt/grime build-up. Restores tarmac colour Helps protect from water damage Reduces dirt/grime build-up Inhibits organic growth Solvent-free     For more in our range of sealants, please click here. For our range of concrete products, click here. To find out more about Bond It and their range of products, you can visit their website here.
  • £5.57 ex. VAT
      Soudaflex 36FL is a PREMIUM QUALITY polyurethane flooring sealant which is very easy to apply and remains flexible after curing. It has good adhesion on many materials, excellent resistance to many chemicals and has been developed especially for concrete flooring applications. No bubble formation within sealant as a result of high temperatures or humidity. It also contains a non-staining on natural stone and concrete formulation.   Properties - Very easy to apply - Excellent chemical resistance - Good weather and UV resistance. - Permanently elastic after curing - Ver
  • £3.72 - £70.48 ex. VAT
    £3.72 - £70.48 ex. VAT
      PVA Bond is a medium viscosity, polyvinyl alcohol stabilised, externally plasticised, vinyl acetate homopolymer. It has been designed specifically for use in the building industry as a multi‐purpose bonding agent, an additive for concrete and plasters and as a general-purpose adhesive. In common with conventional PVAC bonding agents, PVA Bond can be used as a general-purpose adhesive for the building industry. BENEFITS • Greatly improved adhesion to a wide range of substrates, including dense concrete, glass, • steel, tiles etc. • Mixes may be applied in much thinn
    Select options This product has multiple variants. The options may be chosen on the product page
  • £6.03 ex. VAT
    £6.03 ex. VAT
      Arbokol 1000 is recommended for use in expansion joints in brickwork and blockwork, perimeter sealing of timber frames (especially where sealant overpainting is required), and structural joints in heavy cladding. However, it is not suitable for vertical joints wider than 25mm, horizontal joints wider than 20mm, or for internal applications. Due to its relatively slow curing process, Arbokol 1000 should not be used in public areas, schools, or spaces prone to vandalism unless the joints can be securely protected during curing. While the product can be painted, users should conduct a p
    Select options This product has multiple variants. The options may be chosen on the product page
  • £3.57 - £17.33 ex. VAT
      AlphaChem Accelerator, Frostproofer & Hardener is a heat‐generating accelerator for cement-based mixes. Its principal uses are to facilitate the production of high early strength concrete, cement render and mortar. It is suitable for use as an aid to cold weather working when the heat generated will offset the retarding effect of low temperatures. AlphaChem Accelerator, Frostproofer & Hardener is based on calcium chloride and surfactants and is therefore not suitable for use in structures that are reinforced with steel. Neither should it be used in mortar in contact with
    Select options This product has multiple variants. The options may be chosen on the product page
  • £5.03 - £61.14 ex. VAT
    £5.03 - £61.14 ex. VAT
      Cromar Exterior Water Seal is a clear, high performance, waterproof treatment for exterior porous surfaces such as brickwork, asbestos and cement. Its water repellent formula makes it ideal for  exterior surfaces. Coverage will depend on the porosity of the substrate. Guideline coverage is 2-4m²/litre/coat.     For more in our range or waterproofers, please click here. For more in our Cromar range, please click here. Alternatively, if you would like more information on Cromar, you can visit their website here.  
    Select options This product has multiple variants. The options may be chosen on the product page
  • £53.13 - £61.60 ex. VAT
    £53.13 - £61.60 ex. VAT
      CM200 PF Fast Cure is a two-part sealant that is used for several sealing areas. Most commonly used for sealing expansion joints, due to the advantages of the CM 200 PF is can be used for sealing expansion joints in concrete paved areas, docks, container depots, industrial factories, warehousing petrol forecourts. CM200 PF can be cold applied, so ideal for small works, such as remedial re-sealing of joints. Advantages High-performance good movement accommodation, tolerant of severe climatic conditions. Chemical Resistant to spillages of fuels, hydraulic fluids, synthetic
    Select options This product has multiple variants. The options may be chosen on the product page
  • £8.68 - £111.55 ex. VAT
    £8.68 - £111.55 ex. VAT
      Isolastic is a highly fluid, pinkish-white liquid made from a water dispersion of an exceptionally elastic polymer. When mixed with cementitious adhesives, it enhances adhesion to all substrates, as well as improving deformability and impermeability after hydration. Isolastic can be combined with Kerabond, Kerabond T, Kerabond Plus, and Adesilex P10, either undiluted or diluted at a 1:1 ratio with water. It is suitable for both interior and exterior bonding of various materials, including all types of ceramic tiles (such as double red, single red, grès, klinker, glass mosaic, and po
    Select options This product has multiple variants. The options may be chosen on the product page
  • £25.00 ex. VAT
      ARDEX P 10 SR Rapid Hardening Crack Repair Resin Kit is a high-performance, solvent-free, two-component silicate resin system, specifically designed for quick and effective repairs. This polymer-modified resin kit comes complete with stitching pins, mixing and dosing bottles, and protective gloves, making it easy to use for various repair and bonding applications. ARDEX P 10 SR is ideal for rapidly repairing non-structural cracks, sealing joints, and serving as a fast-setting adhesive for a wide range of materials. Its versatile nature makes it suitable for both residential and comme
  • £99.75 ex. VAT
      Mapeflex PU 45 FT Fast-curing, paintable polyurethane sealant and adhesive featuring a substantial elasticity modulus suitable for accommodating movements of up to 20%.   It was specifically designed to effectively seal expansion and distribution joints, whether they are in horizontal or vertical surfaces. This versatile sealant is particularly suitable for areas that may occasionally come into contact with hydrocarbons, making it ideal for a range of applications. Additionally, it is highly recommended for creating flexible bonds between various materials commonly employ
    Select options This product has multiple variants. The options may be chosen on the product page
  • £5.32 ex. VAT
      Cromar Alpha Chem Polyurethane 25 is a high-performance, single-component, fast-curing polyurethane sealant specifically designed for applications requiring a durable, elastic bond with exceptional weather resistance. Ideal for bonding a variety of construction materials and sealing expansion joints, it forms a reliable seal without the need for a primer and can be overpainted for seamless finishes.   Key Points: High Elasticity and Strong Bond: Delivers a highly elastic, resilient bond suitable for demanding joint applications. Excellent Weather Resistance: Formul
    Select options This product has multiple variants. The options may be chosen on the product page