The Concrete Hardener hardens and seals the surface of concrete floors and provides a dustproof dressing that gives increased floor life.
For more information on Cromer, please visit their website here.
To shop the 5 litre bottle, please click here. Alternatively shop or full range of sealants here.
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Shed and Fence treat is a water-based decorative timber treatment that brings the colour of new or previously treated timber to life. For use on sheds, gates, fences and timber posts. The product is harmless to both animal and plant life. The product is available in Dark Brown, Light Brown, Red Cedar and Green.
For more information on Cromer, please visit their website here.
For other treatments, please click here. For our waterproofing and water resistant products, please click here.
Select options
This product has multiple variants. The options may be chosen on the product page
Bond It Drive Alive Patio Seal is a premium grade, solvent-free solution designed to protect blocks, patios and sand joints from water penetration, oil/petrol grease spillages and dirt and grime build-up. To enhance the present colour and significantly extend the lifespan of block paving driveways or paths and patios.
Facilitates easy cleaning
Solvent-free formulation - Low odour
Improves water resistance and UV resistance
Retards mould growth.
For more in our range of cleaners, please click here. For our range of tools, please click here.
F
Select options
This product has multiple variants. The options may be chosen on the product page
PVA Bond is a medium viscosity, polyvinyl alcohol stabilised, externally plasticised, vinyl acetate homopolymer. It has been designed specifically for use in the building industry as a multi‐purpose bonding agent, an additive for concrete and plasters and as a general-purpose adhesive.
In common with conventional PVAC bonding agents, PVA Bond can be used as a general-purpose adhesive for the building industry.
BENEFITS
• Greatly improved adhesion to a wide range of substrates, including dense concrete, glass,
• steel, tiles etc.
• Mixes may be applied in much thinn
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Accelerator, Frostproofer & Hardener is a heat‐generating accelerator for cement-based mixes. Its principal uses are to facilitate the production of high early strength concrete, cement render and mortar. It is suitable for use as an aid to cold weather working when the heat generated will offset the retarding effect of low temperatures.
AlphaChem Accelerator, Frostproofer & Hardener is based on calcium chloride and surfactants and is therefore not suitable for use in structures that are reinforced with steel. Neither should it be used in mortar in contact with
Select options
This product has multiple variants. The options may be chosen on the product page
DUO “2 IN 1” WOOD GLUE can be used as a general-purpose joinery adhesive or for applications where long term resistance to moisture is a pre-requisite of the adhesive.
For our full range of filler for wood, please click here. For all other Bond-it products on our website, please click here.
For any further information you may need on Bond-it, please visit their website here.
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Mortar Plasticiser is designed to enhance the workability and freeze thaw resistance of brick and block laying mortars, reducing the likelihood of cracking and crazing. It may be used to replace or supplement the use of lime.
BENEFITS
- Mortar does not stiffen prematurely on the board but remains plastic.
- Mortar does not segregate or ‘bleed’.
- Mortar is less prone to drying out shrinkage.
- Increased adhesive strength.
- Up to 50% water reduction can be affected.
- Inexpensive to use: allows cement contents to be reduced (depending on present mix design).
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Block & Paving Sealer provides a durable penetrative seal to a wide variety of materials, such as concrete, screeds, brickwork, masonry and fibrous sheet materials. The sealer helps protect both new and existing concrete and masonry against pollutants that are both airborne and in water.
Benefits
- Non-yellowing
- Dual Sealing and Curing Action
- High Penetration
- Suitable to receiving subsequent treatments
- Can be used on both horizontal or vertical surfaces
- Vapour permeable, allowing the substrate to breath
- Provides increased protection to at
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Integral Waterproofer is a liquid admixture designed to reduce water absorption and make cement mixes less permeable.
It also improves the workability of the mortar. Integral Waterproofer is suitable for use in rendering finishes and pointing mortars.
It is also used in reconstructed stone and non-structural concrete members – particularly valuable in:‐
- Semi‐dry mixes.
- Internal and external rendering.
- Special finishes.
- Pebbledash and Harling
- Rough Cast.
- Stucco etc.
DOSAGE
- 1 litre per 50‐100kg cement.
Select options
This product has multiple variants. The options may be chosen on the product page