Cromar Exterior Water Seal is a clear, high performance, waterproof treatment for exterior porous surfaces such as brickwork, asbestos and cement. Its water repellent formula makes it ideal for exterior surfaces.
Coverage will depend on the porosity of the substrate. Guideline coverage is 2-4m²/litre/coat.
For more in our range or waterproofers, please click here.
For more in our Cromar range, please click here.
Alternatively, if you would like more information on Cromar, you can visit their website here.
Select options
This product has multiple variants. The options may be chosen on the product page
Bond It 3 in 1 Wood Treatment is a ready to use, 3 in 1 microemulsion universal wood preserver that kills active woodworm, protects against woodworm infestation and protects timber against wood rot.
A fungicide and insecticide formulation based on microemulsion technology for eradicating and preventing attack by wood boring insects (eg. woodworm, etc) and wood rotting fungi. This formulation is a water based microemulsion producing a non-flammable, virtually odourless, quick drying treatment that contains no volatile organic compounds (VOC’s), supplied ready to use direct from
A fast-drying, water-resistant PVA wood adhesive with a bond strength stronger than the wood itself, ideal for general joinery and applications requiring long-term moisture resistance. Conforming to EN204 D3/3 and D3/4 standards and meeting BS 4071 creep resistance requirements, it ensures rapid bond strength development. Suitable for hard and softwoods, decorative laminates, chipboard, blockwood, and engineered timber panels, it can be used in areas exposed to high humidity or occasional water contact, such as kitchen worktops, window frames, doors, and stairs. However, it is not suit
Select options
This product has multiple variants. The options may be chosen on the product page
3 in 1 Admixture from AlphaChem is an air entraining chloride free liquid admixture for waterproofing, plasticising and retarding of render mixes. Conforms to BS4887 air entraining properties.
AlphaChem 3 in 1 Admixture has the benefits of being an air-entrainer and retarder, allowing large areas to be covered in one single application hence improving workability, trowel-ability and significantly reducing water penetration. The improved durability reduces efflorescence and shrinkage.
For more information on Cromar, please visit their website here.
For our full list
AlphaChem Mortar Plasticiser is designed to enhance the workability and freeze thaw resistance of brick and block laying mortars, reducing the likelihood of cracking and crazing. It may be used to replace or supplement the use of lime.
BENEFITS
- Mortar does not stiffen prematurely on the board but remains plastic.
- Mortar does not segregate or ‘bleed’.
- Mortar is less prone to drying out shrinkage.
- Increased adhesive strength.
- Up to 50% water reduction can be affected.
- Inexpensive to use: allows cement contents to be reduced (depending on present mix design).
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Block & Paving Sealer provides a durable penetrative seal to a wide variety of materials, such as concrete, screeds, brickwork, masonry and fibrous sheet materials. The sealer helps protect both new and existing concrete and masonry against pollutants that are both airborne and in water.
Benefits
- Non-yellowing
- Dual Sealing and Curing Action
- High Penetration
- Suitable to receiving subsequent treatments
- Can be used on both horizontal or vertical surfaces
- Vapour permeable, allowing the substrate to breath
- Provides increased protection to at
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Integral Waterproofer is a liquid admixture designed to reduce water absorption and make cement mixes less permeable.
It also improves the workability of the mortar. Integral Waterproofer is suitable for use in rendering finishes and pointing mortars.
It is also used in reconstructed stone and non-structural concrete members – particularly valuable in:‐
- Semi‐dry mixes.
- Internal and external rendering.
- Special finishes.
- Pebbledash and Harling
- Rough Cast.
- Stucco etc.
DOSAGE
- 1 litre per 50‐100kg cement.
Select options
This product has multiple variants. The options may be chosen on the product page
illbruck CT113 EPDM Membrane Adhesive is a viscous liquid adhesive made from a blend of synthetic rubber and resins, developed for the bonding of illbruck EPDM membranes. illbruck CT113 is a viscous adhesive developed for the bonding of ME220 EPDM membranes, particularly in façade applications. illbruck CT113 is compatible with surfaces such as wood, metal, masonry and other building materials.
BENEFITS
- Cured adhesive has excellent resistance to weathering and the ageing effects of UV exposure
- Adhesive accommodates a wide fluctuation in temperature from -20°C to +8
£5.03 - £61.14 ex. VATCromar Exterior Water Seal is a clear, high performance, waterproof treatment for exterior porous surfaces such as brickwork, asbestos and cement. Its water repellent formula makes it ideal for exterior surfaces. Coverage will depend on the porosity of the substrate. Guideline coverage is 2-4m²/litre/coat. For more in our range or waterproofers, please click here. For more in our Cromar range, please click here. Alternatively, if you would like more information on Cromar, you can visit their website here.Select options This product has multiple variants. The options may be chosen on the product page
