CM SFS Stain Free Silicone is a moisture-cured one-component neutral silicone sealant used mainly for building and glazing joints. With it moisture cure allowing it to cure at room temperature, producing a flexible seal. CM SFS Stain Free Silicone adheres to most common building surfaces without the need for primer. Fully cured movement capability of -/+50%.
For more in our sealant range, click here. For shop our ful CM Sealants range, please click here.
For more information on CM sealants, you can visit their website here.
Select options
This product has multiple variants. The options may be chosen on the product page
Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting.
The following features are obtained when used correctly:
– Excellent mechanical and chemical resistance, therefore excellent durability.
– A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
– Easy workability and finishing.
– Becomes ve
Select options
This product has multiple variants. The options may be chosen on the product page
Bond-it WP70 Neutral Cure Oxime Silicone is a one-component, professional-grade neutral oxime curing sealing compound.
Bond-it WP70 is a high quality, neutral cure silicone for perimeter sealing of internal and external door and window frames. Rapid curing with excellent adhesion properties and a higher gloss finish.
- Permanently elastic
- Weatherproof
- Non-fading
- Suitable for alkaline and metal surfaces
- Low odour
- Safe to use
- Contains additional uPVC adhesion promoters.
For all other Bond-It products on our website, please click here.
F
Select options
This product has multiple variants. The options may be chosen on the product page
Kerapoxy is a two-component, epoxy-resin based product with silica sand and special components, with excellent resistance to acids and excellent cleanability. This is a product with very low emission of volatile organic compounds and is classified Emicode EC1 R Plus by GEV when used for grouting.
The following features are obtained when used correctly:
- Excellent mechanical and chemical resistance, therefore excellent durability.
- A smooth final surface with low water absorption, therefore easy to clean; ensures hygiene.
- Easy workability and finishing.
- Becomes very hard an
Select options
This product has multiple variants. The options may be chosen on the product page
Keracolor FF is a high performance cementitious grout, polymer modified, for joints up to 6 mm.
TECHNICAL CHARACTERISTICS
Keracolor FF is a blend of cement, very fine-graded aggregates, special polymers, additives and pigments. The use of special hydrophobic additives (DropEffect and BioBlock technology) gives grouting mortars highly water-repellent properties, making them less prone to dirtiness and with excellent durability. The addition of BioBlock® technology resists the growth of mould and mildew, allowing the grout to be easily cleaned.
The following features are obta
Select options
This product has multiple variants. The options may be chosen on the product page
Silirub LM is a high quality, elastic, 1- component sealant based on silicones. HIGH QUALITY low modulus, neutral cure silicone sealant. Very fast skinning time and final cure. Excellent toolability. Primerless adhesion on all common construction materials. High movement capability. Resistant to UV, rain, snow.
PROPERTIES
- Very easy to apply
- Colourfast and UV resistant
- Permanently elastic after curing
- Very good adhesion on many materials
- Low modulus
- Neutral curing Applications
- All usual building joints with high movement.
- Glazing and joint works.
- Expansion joints
Select options
This product has multiple variants. The options may be chosen on the product page
Kerapoxy CQ is certified by the University of Modena (Italy) according to ISO 22196:2007 standards as a grouting mortar protected against the formation and proliferation of micro-organisms.
TECHNICAL CHARACTERISTICS
Kerapoxy CQ is a two-component, epoxy resin-based product with silica sand and other special components. It has excellent resistance to acids and is very easy to clean. Kerapoxy CQ has a bacteriostatic agent, preventing the proliferation of bacteria and forming mould on the surfaces of grouts, making tiled surfaces hygienic and safe, thanks to the innovative BioBlock technolo
Select options
This product has multiple variants. The options may be chosen on the product page
Bond It Geo-Fix All Weather is a single component joint filling system for the simple and rapid pointing of paved areas with joints over 5mm. Ready-to-use, simple brush application.
Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather.
Features & Benefits:
- Can be used in both dry and wet conditions ‐ no more wasted days due to wet weather
- Can be used on joint widths of a minimum of 5 mm wide and a minimum of 15 mm deep. Semi‐rigid allowing for expansion and contraction of paving
- GEO‐FIX All Weather is unaffected by w
Select options
This product has multiple variants. The options may be chosen on the product page
illbruck SP525 is a low modulus sealant with high movement capability, excellent primerless adhesion to many substrates and long-term performance. It is also used for the bonding of ME500 & ME501 Intelligent Window Membranes.
s sealant and adhesive formulated using advanced tremco illbruck SP polymer technology. It has high movement capability, excellent primerless adhesion to many substrates and long-term performance.
Product Benefit
- Meets the requirements of EN ISO 11600 F 25LM
- Formulation based on advanced SP polymer technology
- High movement, rapid curi
Select options
This product has multiple variants. The options may be chosen on the product page
Keracolor SF is a super fine, high performance cementitious grout, polymer modified, for joints up to 4 mm.
TECHNICAL CHARACTERISTICS
Keracolor SF is a blend of cement, fine-grained inert materials, synthetic resins, special admixtures and pigments. Keracolor SF is characterised by its unique rheological behaviour, making it particularly suitable for grouting narrow tile joints. When mixed with water in the proportions recommended and correctly applied, it forms a grouting mortar with the following characteristics: • good compressive and flexural strength and good resistance
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Building Trade Silicone is a premium, neutral cure silicone sealant exclusively created for weather sealing and glazing applications. Suitable for adhesion to a wide range of porous and non‐porous substrates, Building Trades Silicone forms a flexible UV, water and weatherproof seal. The fast curing, high viscosity, long-lasting formula is not affected by exposure to sunlight, rain, snow with exceptional resistance to temperature extremes. Low odour and non-corrosive, providing permanent elasticity. Mould resistant.
For more information on Cromer, please visit
Select options
This product has multiple variants. The options may be chosen on the product page
Sika Plastix 22A - Premium Grade is a low mod, neutral curing silicone, that is suitable for a wide range of construction and industrial applications but particularly suited for all glazing, façade and roofline applications.
USES
- Perimeter pointing around uPVC windows
- Expansion joint sealing.
- General glazing sealing and draught-proofing, including repair work over existing sealant.
- Air-test sealing
- Parapet and roofline weather sealing.
- Sanitary sealing.
- Glass to glass joints and glass to aluminium sealing.
- Sealing softer metals such as lead, brass, copper and zinc.
-
Select options
This product has multiple variants. The options may be chosen on the product page