ARDEX MVS 95 is a ready-to-use, one-component, water-based dispersion coating available in pre-gauged 12kg units. This pigmented blue coating indicates uniform coverage and becomes waterproof once fully cured. Designed to suppress residual construction moisture in cementitious substrates, including properly prepared power-floated concrete and cement/sand screeds, ARDEX MVS 95 is intended for use as a two-coat system. When fully dry, it creates a membrane that can accommodate hygrometer readings of up to 95% relative humidity (RH) and allows the subsequent application of ARDEX levelin
ARDEX E 100 is an acrylic-based dispersion designed for enhancing screeding and rendering mortars for both internal and external applications. By incorporating ARDEX E 100, the compressive and tensile strengths, elasticity, and bond strength of modified mortars are significantly improved, while workability and plastic properties are enhanced without increasing the water/cement ratio. Additionally, ARDEX E 100 effectively reduces the formation of early-age cracks. It is also suitable for use in bonding slurries and grout mixtures with ARDEX A38 Rapid Hardening and Drying Cement for fl
ARDEX PSRS is a solvent-free, two-component epoxy resin with ultra-low viscosity, specifically designed for strengthening and restoring poorly compacted and low-strength screeds that fail to meet the required in-situ crushing resistance value. This product effectively penetrates defective screeds, filling voids created by inadequate compaction and consolidating loose particles. Once cured, the resin-filled substrate delivers a high-strength screed that achieves the highest soundness category as defined in BS 8204-1 for in-situ crushing resistance. ARDEX PSRS is particularly beneficia
ARDEX R 5 E Rapid Curing Solvent Free Epoxy Primer and Bonding Agent is a two-component, solvent-free epoxy resin designed for application on sound concrete, cementitious surfaces, calcium sulfate-based screeds, and smoothing compounds. This product is ideal for situations where faster curing times are essential, as it creates a primer or bonding layer on most dry substrates, particularly on smooth or dense surfaces, both indoors and outdoors. It serves as a primer and bonding bridge for the ARDEX range of cement-based tiling and flooring products and must be sand-blinded with dry AR
ARDEX RAPIDLAY MEMBRANE is a specially coated, fiberglass-reinforced sheet underlay designed for efficient installation of floor coverings, particularly sheet vinyl, over a range of new or old sub-floors in residential and light commercial settings. It is suitable for diverse surfaces, including contaminated or damp sub-floors, old vinyl, ceramic tiles, sheet metal, and asphalt, offering a dimensionally stable and moisture-resistant base. This sheet underlay reduces installation time by bypassing typical drying periods, allows for easy removal of temporary flooring without adhesive d
ARDEX RAPIDLAY MEMBRANE is a specially coated, fiberglass-reinforced sheet underlay designed for efficient installation of floor coverings, particularly sheet vinyl, over a range of new or old sub-floors in residential and light commercial settings. It is suitable for diverse surfaces, including contaminated or damp sub-floors, old vinyl, ceramic tiles, sheet metal, and asphalt, offering a dimensionally stable and moisture-resistant base. This sheet underlay reduces installation time by bypassing typical drying periods, allows for easy removal of temporary flooring without adhesive d
ARDEX DPM 1 C R is a rapid-drying, one-coat, two-component epoxy resin designed for fast-track installations, forming a durable damp-proof membrane with high bond strength, able to accommodate moisture readings up to 98% RH. It resists water, grease, oil, aqueous salt solutions, and dilute mineral and organic acids. Ideal for creating a damp-proof barrier, ARDEX DPM 1 C R is used to suppress residual moisture in sound, well-compacted concrete slabs and cement/sand screeds with moisture readings up to 98% RH. It can also be applied in thinner layers for moisture suppression in concret
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX ARDURAPID A 45 is a fast-drying, slump-free mortar ideal for a range of internal repairs. This mortar sets in 15 minutes and can be walked on within 90 minutes at 20°C, regardless of application thickness. It is suitable for re-profiling and repairing concrete surfaces, filling cracks, making good around pipework and frames, and forming ramps and coves. When used as a wearing surface, ARDEX ARDURAPID A 45 requires a suitable protective coating.
Key Points:
Rapid Setting and Hardening: Sets in 15 minutes, allowing foot traffic after 90 minutes at 20°C.
Ver
ARDEX SD-T B base mix is specifically formulated to pre-level concrete surfaces before the application of ARDEX K 80. This Industrial Floor System combines durability, low maintenance, and ease of application with the innovative ARDEX ‘Rapidry Formula,’ which chemically binds the mixed water, enabling the product to dry quickly while developing strength. When thick applications are needed, ARDEX SD-T B can be applied at depths ranging from 6mm to 50mm to achieve a level base, and it allows for a minimum thickness of 5mm of ARDEX K 80 to be applied just hours after its application
ARDEX A 35 MIX is a specially formulated blend of ARDEX A 35 cement and graded sand designed to create ultra-rapid drying floor screeds for internal applications. Utilizing 'RAPIDRY FORMULA' technology, ARDEX A 35 MIX allows for foot traffic just 3 hours after application, and both ceramic and natural stone tiles can be installed after only 24 hours, regardless of thickness. Additionally, resilient floor coverings such as carpet, vinyl, and wood can also be laid after 24 hours. This product achieves rapid strength and passes the BRE Screed (ISCR) Test in just 6 hours, surpassing the
ARDEX K 80 is a specially designed cement-based compound ideal for resurfacing and leveling existing concrete floors, providing a hard, smooth, and flat surface suitable for various paint and resin coatings. This product works seamlessly with the ARDEX SD-T B base mix, which pre-levels concrete surfaces before applying ARDEX K 80. Featuring the innovative ARDEX "Rapidry Formula," this industrial floor system combines toughness, low maintenance, ease of application, and high durability. The unique formula allows ARDEX K 80 to chemically bind the mixed water, enabling it to d
ARDEX K 15 HB is a high-build leveling compound designed for thicknesses ranging from 5mm to a maximum of 35mm. This versatile product is ideal for rapidly leveling uneven, hard subfloors, such as concrete and other rigid bases, and can be used with primers like ARDEX P 82, ARDEX P 51, or ARDEX P 4. Comprising special cements, graded aggregates, and high-quality synthetic resins, ARDEX K 15 HB, when mixed with water, creates a fluid, pumpable mortar suitable for single-pass applications. Notably, it can be walked on in approximately 2 hours at 20°C and can receive resilient floor fi
£152.03 ex. VATARDEX MVS 95 is a ready-to-use, one-component, water-based dispersion coating available in pre-gauged 12kg units. This pigmented blue coating indicates uniform coverage and becomes waterproof once fully cured. Designed to suppress residual construction moisture in cementitious substrates, including properly prepared power-floated concrete and cement/sand screeds, ARDEX MVS 95 is intended for use as a two-coat system. When fully dry, it creates a membrane that can accommodate hygrometer readings of up to 95% relative humidity (RH) and allows the subsequent application of ARDEX levelin
£56.06 ex. VATARDEX E 100 is an acrylic-based dispersion designed for enhancing screeding and rendering mortars for both internal and external applications. By incorporating ARDEX E 100, the compressive and tensile strengths, elasticity, and bond strength of modified mortars are significantly improved, while workability and plastic properties are enhanced without increasing the water/cement ratio. Additionally, ARDEX E 100 effectively reduces the formation of early-age cracks. It is also suitable for use in bonding slurries and grout mixtures with ARDEX A38 Rapid Hardening and Drying Cement for fl
£191.09 ex. VATARDEX PSRS is a solvent-free, two-component epoxy resin with ultra-low viscosity, specifically designed for strengthening and restoring poorly compacted and low-strength screeds that fail to meet the required in-situ crushing resistance value. This product effectively penetrates defective screeds, filling voids created by inadequate compaction and consolidating loose particles. Once cured, the resin-filled substrate delivers a high-strength screed that achieves the highest soundness category as defined in BS 8204-1 for in-situ crushing resistance. ARDEX PSRS is particularly beneficia
£118.80 ex. VATARDEX R 5 E Rapid Curing Solvent Free Epoxy Primer and Bonding Agent is a two-component, solvent-free epoxy resin designed for application on sound concrete, cementitious surfaces, calcium sulfate-based screeds, and smoothing compounds. This product is ideal for situations where faster curing times are essential, as it creates a primer or bonding layer on most dry substrates, particularly on smooth or dense surfaces, both indoors and outdoors. It serves as a primer and bonding bridge for the ARDEX range of cement-based tiling and flooring products and must be sand-blinded with dry AR
