Topcem Pronto is a pre-blended, ready-to-use mortar formulated with a special hydraulic binder and graded aggregates, designed for normal setting and controlled shrinkage. This product simplifies the mixing process by requiring only the addition of water, which eliminates the risk of errors associated with the proportions of binder and aggregates, thus ensuring optimal performance once cured. Topcem Pronto is particularly beneficial in areas where sourcing quality graded aggregates is challenging, such as urban job sites where traditional mixing logistics can be complicated. It offer
Primer G is a synthetic resin-based primer that dries to create a flexible, compact, and shiny coating on various surfaces, effectively consolidating them where necessary. This primer enhances the adhesion of smoothing compounds, paints, wallpaper adhesives, tile adhesives, and render mortars. Additionally, it forms a protective film on gypsum and cement surfaces, preventing chemical reactions between sulphates and cement aluminates, which can cause ettringite formation and subsequent separation when moisture is present. When used prior to wallpaper application, it reduces substrate
UltraCare Stain Protector S is designed to minimize the absorption of water, oil, and grease in various surfaces, facilitating easier maintenance and cleaning. This product is suitable for application on floors, coatings, work surfaces, kitchen tops, and bathrooms. It does not form a film on the surface, preserving the original colour and breathability of the material while providing good UV stability. UltraCare Stain Protector S dries quickly, is easy to apply, and is resistant to traffic, maintaining the anti-slip properties of the treated materials. Additionally, surfaces treated
ULTRACARE STAIN PROTECTOR W is designed to reduce the absorption of water, oil, and grease into surfaces, making maintenance and cleaning significantly easier. This product is safe for food contact surfaces and can be applied to floors, coatings, work surfaces, kitchen countertops, and bathrooms. It does not form a film on the surface, preserving the original colour and breathability of the material while also providing excellent UV stability.
Key Points:
Provides effective protection against water and oil without altering the aesthetic finish of surfaces.
Suitable
UltraCare Intensifier S is a cutting-edge, solvent-based formulation designed to preserve and enhance the colour of various surfaces, including natural stone (even those with a polished finish), terracotta, terrazzo, marble-chip tiles, cementine tiles, and engineered stone, suitable for both internal and external applications. When applied, it refreshes and brightens the material's colour while its solvent-based composition enables deep absorption, making it particularly effective on compact or polished surfaces. This product is perfect for use on internal and external floors and wal
UltraCare Intensifier W is a cutting-edge, water-based formulation designed to preserve and enhance the colour of natural stone with medium to high absorbency, as well as terracotta, terrazzo, marble-chip tiles, cementine tiles, and engineered stone in both internal and external environments. This product refreshes and intensifies the colour of surfaces, imparting a bright finish, making it suitable for floors, walls, window ledges, doorsteps, decorative features, and worktops. Its unique water emulsion formulation allows for application on damp substrates, making it ideal for situat
Rapid Set is a fast-setting, grey cement-based adhesive for internal and sheltered external ceramic floor tile installations. Comprising special binders, synthetic resins, selected aggregates, and accelerators, it provides good bond strength within 3 hours, allowing light foot traffic for grouting and limited access. Floors are ready for full use after 24 hours and, once cured, Rapid Set is both water-resistant and frost-proof.
Key points:
Suitable for installing most ceramic and porcelain tiles, as well as natural stone indoors.
Designed for small to med
Adesilex P9 Express is a powdered adhesive available in white or grey, composed of a unique blend of special cement, graded aggregates, synthetic resin, and set accelerators, enabling it to establish a strong bond within just 3-4 hours after application. This quick setting time allows floor and wall coverings to be used almost immediately, with floors ready for foot traffic in just 4 hours and usable after 24 hours. Once cured, Adesilex P9 Express offers excellent resistance to freezing conditions and water. When mixed with water, it creates a mortar characterized by good workability
Select options
This product has multiple variants. The options may be chosen on the product page
Adesilex P9 is a grey or white powder made from cement, fine-graded aggregates, synthetic resins, and special additives developed in MAPEI's Research and Development Laboratories. When mixed with water, it creates a mortar that is easily workable and highly thixotropic, allowing for vertical application without sagging or slipping, even with heavy tiles. It offers excellent adherence to various building materials and hardens with minimal shrinkage. Additionally, Adesilex P9 features an extended open time and is resistant to water and frost.
Key Points:
Adesilex P9 is
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX WA, classified under the BS EN 12004 R2 T designation, is recognized as an ‘improved reaction resin adhesive with additional characteristics and reduced slip.’ This solvent-free, epoxide resin-based adhesive serves both as a thin bed adhesive and grouting compound, making it ideal for environments that require chemical resistance or where traditional cement-based grouts may not be suitable. It is versatile enough to be used for fixing and grouting all types of ceramic tiles, glass, and ceramic mosaics in both internal and external applications. Once fully cured, ARDEX WA cr
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 60 PU FLEX is classified under the BS EN 12004 standard as an "Improved reaction resin adhesive with reduced slip for internal and external tiling." This two-part polyurethane adhesive is designed for fixing various tile types to challenging substrates, making it highly versatile for both indoor and outdoor applications. Its formulation is particularly effective on problematic surfaces such as GRP, steel, and polyester, as well as moisture-sensitive interiors like particle boards, plywood, plasterboards, gypsum fiber boards, fiber cement boards, and plaster slabs. Additionall
ARDEX E 90 is a specialized synthetic dispersion designed to enhance the performance of ARDEX X 7 G, ARDEX X 7 W, and ARDEX S 21 cement-based adhesives. When diluted with an equal volume of water before mixing with the ARDEX adhesive powder, ARDEX E 90 significantly improves the adhesive properties of the mortar. The resulting mixture exhibits high adhesive strength, elasticity, and water-repellent qualities, while maintaining the workability, slump resistance, and open time characteristic of standard ARDEX adhesives. Substrate preparation follows the same guidelines as for ARDEX adh
£17.71 ex. VATTopcem Pronto is a pre-blended, ready-to-use mortar formulated with a special hydraulic binder and graded aggregates, designed for normal setting and controlled shrinkage. This product simplifies the mixing process by requiring only the addition of water, which eliminates the risk of errors associated with the proportions of binder and aggregates, thus ensuring optimal performance once cured. Topcem Pronto is particularly beneficial in areas where sourcing quality graded aggregates is challenging, such as urban job sites where traditional mixing logistics can be complicated. It offer
