ARDEX X 78 S grey is a MICROTEC fibre-reinforced, ultra-rapid setting, cement-based floor tile adhesive that can be walked on and grouted within just 90 minutes. Formulated for superior adhesion and flexibility, it features a semi-pourable consistency that is ideal for fixing large format floor tiles. ARDEX X 78 S is particularly suited for fully vitrified or porcelain tiles, as well as glass mosaics, terrazzo, and other low-porosity tiles. Classified under BS EN 12004 as a C2 FE S1 adhesive, it offers fast setting, deformability, and extended open time. Its tensile adhesion strength
ARDEX X 7001/ARDEX X 7001W is a grey or white, MICROTEC fibre-reinforced, rapid hardening and drying flexible cement-based floor tile adhesive. It is designed for use on wood-based sheets, boards, and other surfaces, making it ideal for internal applications such as fixing floor tiles and tile backer boards. The built-in fibres help minimize the risk of cracking over board joints in the event of timber movement, while its pourable consistency enables solid bedding of tiles without back-buttering. Classified under BS EN 12004 C2 FE as an "improved cementitious adhesive with ex
ARDEX X 325 PTB and ARDEX X 325 PTB W are rapid-setting, cement-based thick-bed pourable floor tile adhesives designed for applications ranging from 3mm to 25mm in depth. These adhesives allow for tiles to be walked on and grouted within just 3 hours. Classified as C2 F by BS EN 12004, they are recognized as improved, fast-setting cementitious adhesives with excellent performance characteristics. These offer strong adhesion with a tensile strength of over 1 N/mm², even after water immersion, heat aging, or freeze-thaw cycling. While these adhesives are ideal for large format tiles a
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 77 S is a grey, fibre-reinforced, ultra-rapid setting and hardening cement-based adhesive designed for both floor and wall tiles. Its MICROTEC technology enhances adhesion and flexibility while offering advanced slump resistance, making it particularly suitable for large-format wall tiles. This adhesive is perfect for a variety of tiles, including ceramic, fully vitrified, glass, porcelain mosaics, and terrazzo. ARDEX X 77 S bonds effectively to numerous construction materials such as concrete, cement and sand renders, heated sub-floors, brickwork, gypsum plaster, and even ex
ARDEX Indortec Flexbone Matting – VA is a robust, waterproof uncoupling membrane designed to handle high loads and accommodate lateral movements in tile installations on floors with restricted movement. This matting is particularly effective in mitigating tension stresses between the substrate and the installed floor, thus preventing reflective cracking that can arise from shrinkage cracks, board joints, and lateral shifts. It provides essential crack bridging, making it suitable for challenging substrates and ensuring a secure and stable installation.
Key Poin
ARDEX S 21 is a high-performance, fast-setting cementitious adhesive classified under the BS EN 12004 C1 F standard. This designation indicates that the adhesive is designed for quick setting and is ideal for situations where time is a factor. Once tiles are set with ARDEX S 21, they can be grouted and subjected to normal use within just 3 hours at standard temperatures. This makes it particularly useful for projects that require rapid turnaround or for environments where lower temperatures could slow down the setting of traditional cement-based adhesives.
ARDEX S 21 is a grey pow
ARDEX K 301 is a fast-setting resurfacing and leveling compound designed specifically for concrete surfaces. Here are four key points about ARDEX K 301:
Composition and Setting Time: This grey powder is made from a blend of special cements, graded aggregates, and high-quality synthetic resins. When mixed with water, it forms a fluid mortar that begins to set within approximately 1 hour. It can typically be walked on after 2-3 hours at 20°C.
Application Thickness: ARDEX K 301 can be applied in thicknesses ranging from 2mm to 20mm in a single coat. This versatility a
ARDEX EG 18 PLUS offers the advantages of both epoxy and cement-based grouts, combining high performance with ease of application. This grout is known for its exceptional chemical and abrasion resistance, creating joints that are both hygienic and low-maintenance. Here are four key points:
Durability and Resistance: ARDEX EG 18 PLUS excels in environments that demand high durability. It is highly resistant to chemicals, including aqueous salt solutions, chlorine, commercial cleaning agents, alkalis, and various dilute mineral acids. Full chemical resistance is achieved
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 78 is a high-performance, grey, MICROTEC fibre-reinforced, cement-based adhesive designed specifically for floor tiles. It has an extended open time of up to 60 minutes, allowing more flexibility during installation. Its semi-pourable consistency makes it particularly suitable for large format floor tiles, ensuring excellent adhesion and ease of use.
Versatile Application: ARDEX X78 is ideal for installing low-porosity tiles such as fully vitrified or porcelain tiles, as well as glass mosaics, porcelain mosaics, and terrazzo.
Industry Standards: Certified un
ARDEX X 77 and ARDEX X 77 W are advanced, fibre-reinforced, cement-based adhesives available in grey and white. Designed for both floor and wall applications, these MICROTEC products offer exceptional adhesion and flexibility, with an extended open time of up to 60 minutes, double the industry requirement. Their superior slump resistance makes them ideal for fixing large format wall tiles.
Versatility: ARDEX X 77 is perfect for fixing various tile types, including ceramic, fully vitrified tiles, glass mosaics, porcelain, and terrazzo, particularly those with low porosi
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX WPC is an advanced, cement-based waterproof coating, designed for rapid drying, allowing tiling to begin as soon as 90 minutes after application. This product features an adjustable mix ratio, making it versatile for various uses including filling holes, gaps, and joints, as well as for general waterproofing purposes. It is ideal for waterproofing surfaces such as cement and sand renders, gypsum plaster, and plasterboard, ensuring a reliable foundation for tiling in both domestic and commercial environments like kitchens, showers, and bathrooms. It's i
Select options
This product has multiple variants. The options may be chosen on the product page
Hodgson Sealants HS30 represents a single-component, solvent-free, neutral-cure sealant and adhesive that employs moisture curing. Formulated with Hodgson Hybrid Polymer Technology, it offers outstanding strength and exceptional extension capabilities, making it a versatile choice for various applications.
• Free of solvents and isocyanates.
• Contains no Phthalates or other harmful plasticizers.
• Exhibits outstanding primerless adhesion on most substrates.
• Demonstrates impressive strength.
• Accommodates substantial movement effectively.
• Provides a
Select options
This product has multiple variants. The options may be chosen on the product page
£39.65 ex. VAT
