Cromar AlphaChem Line Marking Paint is a solvent based spray applied, line marking paint – quick drying (30 minutes) and semi permanent. Ideal for spot marking for contractors on roads, factory and warehousing floors etc., as well as for grass applications.
For more information on Cromar, please visit their website here.
For primers and cleaners, please click here.
Select options
This product has multiple variants. The options may be chosen on the product page
More 2 Mix is a Mortar Plasticiser in concentrate form. A highly concentrated mortar plasticiser used in bricklaying and plastering mortars to aid workability and freeze thaw resistance. Reduces the likelihood of cracking and crazing. 1ltr will make 25ltr of ready to use product in a handy bottle that helps to control the dosing of mortar.
More 2 Mix improves the adhesion and workability of sand and cement mixtures for use in brick laying and rendering to BS 4881 Part 1:1986.
ADVANTAGES
Concentrated Mortar Plasticiser is equivalent to 25 litres of normal Plasticiser. A simpl
illbruck CT600 is a high strength spray contact adhesive that is ideal for quick & straightforward bonding of many common materials.
illbruck CT600 is ideal for quick and straightforward bonding of most common materials, including cardboard, fibrous insulation materials, plastics, canvas, cork, rubber, fabrics and foam, either to themselves or onto brickwork, concrete, stone and plaster.
- A robust contact adhesive in a convenient easy-to-use 500 ml canister
- Adjustable nozzle that allows precise control of the spray pattern to suit any particular job
- Superior covera
Arboseal Intumescent Tape is a flat, preformed intumescent strip made from synthetic rubbers and selected fire-resistant materials. It deforms under moderate pressure, providing good surface tack and recovery. When exposed to flames, the tape expands and chars to block the passage of fire and smoke. It is recommended for use in HVAC metal ducting, as well as in glazing internal and external FD30-rated timber fire doors and screens.
Key Points:
Flat, preformed intumescent strip with fire-resistant synthetic rubber composition.
Expands and chars under flame to prev
Select options
This product has multiple variants. The options may be chosen on the product page
Arbostrip F90 is a medium-density foam compression seal with a strong acrylic pressure-sensitive adhesive on one side, ideal for weatherproofing, dust sealing, and dry glazing of internal doors and screens. It is also suited for "make-and-break" joints, as well as for sealing openings in lights, ventilators, and doors to prevent drafts and weather intrusion.
Key Points:
Medium-density foam compression seal with acrylic pressure-sensitive adhesive.
Effective as a weather and dust seal and for dry glazing of doors and screens.
Suitable for make-and-break joints
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX FEATHER FINISH is an ultra-rapid drying patching and smoothing compound that offers exceptional bond strength to a variety of surfaces, including concrete, plywood, sand/cement screeds, existing smoothing compounds, and ceramic tiles, all without the need for priming. Specifically designed for both commercial and domestic applications, this compound is ideal for preparing surfaces before the installation of resilient floor coverings, such as luxury vinyl tiles or sheet vinyl. ARDEX FEATHER FINISH effectively addresses issues like patching, filling, and feather finishi
Select options
This product has multiple variants. The options may be chosen on the product page
Mapelastic Smart is a two-component, high-flexibility cementitious mortar designed for waterproofing balconies, terraces, bathrooms, and swimming pools. Formulated with cementitious binders, fine aggregates, special additives, and synthetic polymers in water dispersion, it provides a plastic consistency upon mixing. This versatile mortar can be applied using a brush, roller, or spray with a worm screw rendering machine on both horizontal and vertical surfaces, achieving a thickness of approximately 2 mm. Its high-quality synthetic resins ensure that the hardened layer remains flexibl
Isolastic is a highly fluid, pinkish-white liquid made from a water dispersion of an exceptionally elastic polymer. When mixed with cementitious adhesives, it enhances adhesion to all substrates, as well as improving deformability and impermeability after hydration. Isolastic can be combined with Kerabond, Kerabond T, Kerabond Plus, and Adesilex P10, either undiluted or diluted at a 1:1 ratio with water. It is suitable for both interior and exterior bonding of various materials, including all types of ceramic tiles (such as double red, single red, grès, klinker, glass mosaic, and po
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX AM 100 is a rapid-setting, grey sand and cement render designed to facilitate quick project turnaround. This preblended product requires only the addition of water to achieve a slump-free mortar that can be applied in a thickness range of 2-30mm in a single coat. The primary advantage of ARDEX AM 100 lies in its ability to accommodate both very thin and substantial layers, making it an ideal choice for applications where conventional sand and cement renders would be impractical due to drying time constraints or required thickness. Its versatility extends to a range of s
Mapeproof Swell is a one-component hydrophilic paste designed for repair and waterproofing tasks. It can be applied to damp or uneven surfaces and is effective at any temperature, even when water is infiltrating or seeping through. Upon contact with water, Mapeproof Swell expands in volume and can withstand significant hydrostatic pressure when properly confined. It adheres well to slightly damp surfaces, provided they are clean and stable. This single-component hydro-expansive paste is supplied in cartridges and is specifically formulated to create flexible, waterproof seals in crac
AlphaChem B1 Fire Foam Hand Held represents a high-efficiency, top-tier, single-component PU Expanding Foam, designed to excellently fill and insulate a variety of joints, gaps, and voids in construction settings. Notably, for specific joint arrangements, the product holds a fire rating, compliant with EN 1366-4, and adheres to the DIN4102-B1 Fire Class standard. This designation serves to retard the progress of flames and smoke. Additionally, AlphaChem B1 Fire Foam showcases outstanding acoustic and thermal attributes.
It's important to highlight that this formulation is void of
Mapei Malech Primer is a micronized acrylic-based primer in water dispersion.
It’s generally used as a primer for wall surfaces, for example, concrete or cement mortar repairs. Before applying a coloured finishing coat of Elastocolor Paint or Elastocolor Rasante, it is advised to use Malech as a regulator of substrate absorption.
Malech can also be used in the Aquaflex System cycle for the permanent encapsulation of asbestos, or as a primer for the covering layers of Aquaflex.
It’s a micronized acrylic resin-based primer in water dispersion that penetrates better than trad
£3.50 - £3.53 ex. VATCromar AlphaChem Line Marking Paint is a solvent based spray applied, line marking paint – quick drying (30 minutes) and semi permanent. Ideal for spot marking for contractors on roads, factory and warehousing floors etc., as well as for grass applications. For more information on Cromar, please visit their website here. For primers and cleaners, please click here.Select options This product has multiple variants. The options may be chosen on the product page
£3.49 ex. VATMore 2 Mix is a Mortar Plasticiser in concentrate form. A highly concentrated mortar plasticiser used in bricklaying and plastering mortars to aid workability and freeze thaw resistance. Reduces the likelihood of cracking and crazing. 1ltr will make 25ltr of ready to use product in a handy bottle that helps to control the dosing of mortar. More 2 Mix improves the adhesion and workability of sand and cement mixtures for use in brick laying and rendering to BS 4881 Part 1:1986. ADVANTAGES Concentrated Mortar Plasticiser is equivalent to 25 litres of normal Plasticiser. A simpl
£4.04 ex. VATillbruck CT600 is a high strength spray contact adhesive that is ideal for quick & straightforward bonding of many common materials. illbruck CT600 is ideal for quick and straightforward bonding of most common materials, including cardboard, fibrous insulation materials, plastics, canvas, cork, rubber, fabrics and foam, either to themselves or onto brickwork, concrete, stone and plaster. - A robust contact adhesive in a convenient easy-to-use 500 ml canister - Adjustable nozzle that allows precise control of the spray pattern to suit any particular job - Superior covera
£15.47 ex. VATArboseal Intumescent Tape is a flat, preformed intumescent strip made from synthetic rubbers and selected fire-resistant materials. It deforms under moderate pressure, providing good surface tack and recovery. When exposed to flames, the tape expands and chars to block the passage of fire and smoke. It is recommended for use in HVAC metal ducting, as well as in glazing internal and external FD30-rated timber fire doors and screens. Key Points: Flat, preformed intumescent strip with fire-resistant synthetic rubber composition. Expands and chars under flame to prevSelect options This product has multiple variants. The options may be chosen on the product page
