Bond It Rapid Set Tile Adhesive is a fast-setting adhesive for bonding ceramic tiles to both walls and floors. Due to its fast acting properties, tiles can be grouted and suitable for use in approximately 2-3 hours. For interior use only, in locations subject to occasional wetting, e.g. domestic showers, saunas and bathrooms.
RAPID-SET will bond to various surfaces including concrete, sand/cement screeds, building blocks and brickwork. When used with Bond It PRIMER AND FLEXIBLE ADMIXTURE, it can be used to bond to wooden surfaces, glazed surfaces or used with underfloor
Select options
This product has multiple variants. The options may be chosen on the product page
AlphaChem Integral Waterproofer is a liquid admixture designed to reduce water absorption and make cement mixes less permeable.
It also improves the workability of the mortar. Integral Waterproofer is suitable for use in rendering finishes and pointing mortars.
It is also used in reconstructed stone and non-structural concrete members – particularly valuable in:‐
- Semi‐dry mixes.
- Internal and external rendering.
- Special finishes.
- Pebbledash and Harling
- Rough Cast.
- Stucco etc.
DOSAGE
- 1 litre per 50‐100kg cement.
Select options
This product has multiple variants. The options may be chosen on the product page
Protecta FR Pipe Wrap is designed to maintain the fire resistance of fire separating walls and floors when these are breached by plastic pipes, conduits or metal pipes with continuous combustible insulation and may be used in drywalls, masonry or concrete walls and concrete floors.
Each pipe wrap consists of a graphite based reactive intumescent strip, which reacts to heat and closes the opening left by the softening plastic pipe or pipe insulation in a fire. The pipe wrap is installed entirely around the pipes or insulation and secured with the self-adhesive tab. The annular spac
Select options
This product has multiple variants. The options may be chosen on the product page
Heat Mate Sealant is a high modulus permanently flexible 100% high-temperature silicone that is temperature resistant up to 300°C. Ideal for sealing industrial and high-performance gaskets, oven doors etc.
Advantages
- Excellent temperature resistance remains flexible from -50 - +300°C
- Extremely low dirt pick up. – 1-hour tack-free.
- Orange/red colour – for easy installation identification (black also available)
- Excellent adhesion to non-porous surfaces.
- Waterproof seal
For application guns click here.
For more in our range of Everbuild Products,
Select options
This product has multiple variants. The options may be chosen on the product page
FJ203 is a fire-stopping backer rod made of rock wool sheathed with flexible glass wires.
Benefits
Classification reports for fire resistance up to 4 hours according to NF EN 13501-2
High regularity
Fits all joints
Packaged in long coils
Good cohesion, easy to cut
Other backing foams are available here, we supply flat backer foam and backer rod.
For more information on Nullifire, please visit their website by clicking here.
Select options
This product has multiple variants. The options may be chosen on the product page
illbruck CY340 is a 2-part kit comprising a high viscosity cyanoacrylate adhesive & a spray-applied activator. Ideal for the fast bonding of mitred MDF joints in the installation of kitchen units & fitted bedroom & office furniture. Other uses include the quick bonding of plastics, rubbers and wood.
Instant bonding in less than 10 seconds makes this adhesive ideal for projects where a quick solution is required.
Product Benefits
– 2-piece kit for instant bonding of wood and wood composite mitre joints
– Spray-applied Activator accelerates curing time
Soudal Silirub RAL Color Coloured Silicone Sealant has been specially developed for colour matched sealing based on the RAL Colour System.
Ordering:
RAL colours will have a lead time of up to 8 weeks, and a minimum quantity of 60 carts are required (4 boxes). Lead time will be advised upon order (or contact us via email for a quick reply). When placing an order please add colour RAL code in the comments section.
Any RAL Classic Colour can be produced
Virtually odour free
Low Mondulusneutral cure
Primerless adhesion on most surfaces
UV resistant
Conforms to ISO 11600 F&a
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX X 7001/ARDEX X 7001W is a grey or white, MICROTEC fibre-reinforced, rapid hardening and drying flexible cement-based floor tile adhesive. It is designed for use on wood-based sheets, boards, and other surfaces, making it ideal for internal applications such as fixing floor tiles and tile backer boards. The built-in fibres help minimize the risk of cracking over board joints in the event of timber movement, while its pourable consistency enables solid bedding of tiles without back-buttering. Classified under BS EN 12004 C2 FE as an "improved cementitious adhesive with ex
ARDEX X 325 PTB and ARDEX X 325 PTB W are rapid-setting, cement-based thick-bed pourable floor tile adhesives designed for applications ranging from 3mm to 25mm in depth. These adhesives allow for tiles to be walked on and grouted within just 3 hours. Classified as C2 F by BS EN 12004, they are recognized as improved, fast-setting cementitious adhesives with excellent performance characteristics. These offer strong adhesion with a tensile strength of over 1 N/mm², even after water immersion, heat aging, or freeze-thaw cycling. While these adhesives are ideal for large format tiles a
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX S 27 W is a rapid hardening and drying tile adhesive specifically designed for fixing moisture-sensitive natural stones, as well as porcelain, mosaics, fully vitrified and ceramic tiles, and rigid foam insulating materials like polystyrene in internal dry locations. Its advanced ARDEX Rapidry Technology ensures that mix water is fully bound into the hardened adhesive, significantly reducing the risk of water staining on natural stones and preventing water damage to wooden substrates. Ideal for both wall and floor tiles, including use on heated screeds, ARDEX S 27 W is particula
ARDEX X 77 S is a grey, fibre-reinforced, ultra-rapid setting and hardening cement-based adhesive designed for both floor and wall tiles. Its MICROTEC technology enhances adhesion and flexibility while offering advanced slump resistance, making it particularly suitable for large-format wall tiles. This adhesive is perfect for a variety of tiles, including ceramic, fully vitrified, glass, porcelain mosaics, and terrazzo. ARDEX X 77 S bonds effectively to numerous construction materials such as concrete, cement and sand renders, heated sub-floors, brickwork, gypsum plaster, and even ex
ARDEX D 20 is a ready-mixed wall tile adhesive known for its ease of application and exceptional slump resistance. It is ideal for a variety of tiling projects, including the installation of ceramic tiles and mosaics on gypsum plaster, paper-faced plasterboards, concrete, cement and sand renders, as well as rigid cement-based sheets and boards. This adhesive is also effective for adhering porous tiles to existing ceramic surfaces. ARDEX D 20 is designed for use in dry internal environments, making it suitable for domestic applications such as showers and bathrooms, provided that ther
£5.35 - £8.40 ex. VATBond It Rapid Set Tile Adhesive is a fast-setting adhesive for bonding ceramic tiles to both walls and floors. Due to its fast acting properties, tiles can be grouted and suitable for use in approximately 2-3 hours. For interior use only, in locations subject to occasional wetting, e.g. domestic showers, saunas and bathrooms. RAPID-SET will bond to various surfaces including concrete, sand/cement screeds, building blocks and brickwork. When used with Bond It PRIMER AND FLEXIBLE ADMIXTURE, it can be used to bond to wooden surfaces, glazed surfaces or used with underfloorSelect options This product has multiple variants. The options may be chosen on the product page
£3.60 - £18.12 ex. VATAlphaChem Integral Waterproofer is a liquid admixture designed to reduce water absorption and make cement mixes less permeable. It also improves the workability of the mortar. Integral Waterproofer is suitable for use in rendering finishes and pointing mortars. It is also used in reconstructed stone and non-structural concrete members – particularly valuable in:‐ - Semi‐dry mixes. - Internal and external rendering. - Special finishes. - Pebbledash and Harling - Rough Cast. - Stucco etc. DOSAGE - 1 litre per 50‐100kg cement.Select options This product has multiple variants. The options may be chosen on the product page
£84.64 - £217.94 ex. VATProtecta FR Pipe Wrap is designed to maintain the fire resistance of fire separating walls and floors when these are breached by plastic pipes, conduits or metal pipes with continuous combustible insulation and may be used in drywalls, masonry or concrete walls and concrete floors. Each pipe wrap consists of a graphite based reactive intumescent strip, which reacts to heat and closes the opening left by the softening plastic pipe or pipe insulation in a fire. The pipe wrap is installed entirely around the pipes or insulation and secured with the self-adhesive tab. The annular spacSelect options This product has multiple variants. The options may be chosen on the product page
£11.24 ex. VATHeat Mate Sealant is a high modulus permanently flexible 100% high-temperature silicone that is temperature resistant up to 300°C. Ideal for sealing industrial and high-performance gaskets, oven doors etc. Advantages - Excellent temperature resistance remains flexible from -50 - +300°C - Extremely low dirt pick up. – 1-hour tack-free. - Orange/red colour – for easy installation identification (black also available) - Excellent adhesion to non-porous surfaces. - Waterproof seal For application guns click here. For more in our range of Everbuild Products,Select options This product has multiple variants. The options may be chosen on the product page
