Liquid mortar tone is an Iron Oxide based liquid dye that provides permanent colour to all types of mortars, rendering, pointing and concrete.
For more information on Cromer, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
Select options
This product has multiple variants. The options may be chosen on the product page
Mapetherm AR1 GG is a one component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems. A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories.
To reinforce this, apply Mapetherm Net on top of this base coat render. The Silancolor Render System can then be applied on top.
Mapetherm AR1 GG is ideal for use on insulation or render carrier board.
Cromar Powder Mortar Tone is a permanent powder colourant for pigmenting all types of mortars, rendering, pointing and concrete.
For more information on Cromer, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
Select options
This product has multiple variants. The options may be chosen on the product page
Mapei Malech Primer is a micronized acrylic-based primer in water dispersion.
It’s generally used as a primer for wall surfaces, for example, concrete or cement mortar repairs. Before applying a coloured finishing coat of Elastocolor Paint or Elastocolor Rasante, it is advised to use Malech as a regulator of substrate absorption.
Malech can also be used in the Aquaflex System cycle for the permanent encapsulation of asbestos, or as a primer for the covering layers of Aquaflex.
It’s a micronized acrylic resin-based primer in water dispersion that penetrates better than trad
AlphaChem Mortar Plasticiser is designed to enhance the workability and freeze thaw resistance of brick and block laying mortars, reducing the likelihood of cracking and crazing. It may be used to replace or supplement the use of lime.
BENEFITS
- Mortar does not stiffen prematurely on the board but remains plastic.
- Mortar does not segregate or ‘bleed’.
- Mortar is less prone to drying out shrinkage.
- Increased adhesive strength.
- Up to 50% water reduction can be affected.
- Inexpensive to use: allows cement contents to be reduced (depending on present mix design).
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX K 301 is a fast-setting resurfacing and leveling compound designed specifically for concrete surfaces. Here are four key points about ARDEX K 301:
Composition and Setting Time: This grey powder is made from a blend of special cements, graded aggregates, and high-quality synthetic resins. When mixed with water, it forms a fluid mortar that begins to set within approximately 1 hour. It can typically be walked on after 2-3 hours at 20°C.
Application Thickness: ARDEX K 301 can be applied in thicknesses ranging from 2mm to 20mm in a single coat. This versatility a
Bond It Eco Cem-Klene is a fast acting, cement, concrete and mortar cleaner with low impact on the environment. Eco Cem-Klene is safer than traditional hydrochloric acid based stain removers. Safer than traditional hydrochloric acid based stain removers, this can be used neat or diluted to treat areas and clean tools.
Benefits:
- Non aggressive.
- Safer alternative to hydrochloric acid.
- More environmentally friendly, biodegradable formula.
- Removes wet and cured cement, mortar and concrete.
- Removes efflorescence.
- Cleans stains from pathways and patios.
- Cl