Liquid mortar tone is an Iron Oxide based liquid dye that provides permanent colour to all types of mortars, rendering, pointing and concrete.
For more information on Cromer, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
Select options
This product has multiple variants. The options may be chosen on the product page
Mapetherm AR1 GG is a one component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems. A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories.
To reinforce this, apply Mapetherm Net on top of this base coat render. The Silancolor Render System can then be applied on top.
Mapetherm AR1 GG is ideal for use on insulation or render carrier board.
Cromar Powder Mortar Tone is a permanent powder colourant for pigmenting all types of mortars, rendering, pointing and concrete.
For more information on Cromer, please visit their website here.
For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.
Select options
This product has multiple variants. The options may be chosen on the product page
Mapei Malech Primer is a micronized acrylic-based primer in water dispersion.
It’s generally used as a primer for wall surfaces, for example, concrete or cement mortar repairs. Before applying a coloured finishing coat of Elastocolor Paint or Elastocolor Rasante, it is advised to use Malech as a regulator of substrate absorption.
Malech can also be used in the Aquaflex System cycle for the permanent encapsulation of asbestos, or as a primer for the covering layers of Aquaflex.
It’s a micronized acrylic resin-based primer in water dispersion that penetrates better than trad
AlphaChem Mortar Plasticiser is designed to enhance the workability and freeze thaw resistance of brick and block laying mortars, reducing the likelihood of cracking and crazing. It may be used to replace or supplement the use of lime.
BENEFITS
- Mortar does not stiffen prematurely on the board but remains plastic.
- Mortar does not segregate or ‘bleed’.
- Mortar is less prone to drying out shrinkage.
- Increased adhesive strength.
- Up to 50% water reduction can be affected.
- Inexpensive to use: allows cement contents to be reduced (depending on present mix design).
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX A 38 MIX is a specially formulated blend of ARDEX A 38 cement and graded sands, designed for ultra-rapid drying floor screeds in both internal and external locations. Featuring the innovative ‘RAPIDRY PLUS FORMULA’ Technology, this screed allows for foot traffic just 3 hours post-application, and enables the installation of ceramic and natural stone tiles within 4 hours, regardless of thickness, making it perfect for fast-track tiling projects. Resilient floor coverings like carpet, vinyl, and wood can be laid after 48 hours. With rapid strengthening capabilities, ARDEX A 3
ARDEX A 125 is a grey, cement-based finishing render and repair mortar that effectively addresses surface imperfections, voids, and damage. When mixed with water, it forms a slump-free mortar that dries to a durable, water-resistant finish with a smooth and dense surface ideal for painting.
Key Points:
Versatile Application: Suitable for leveling and smoothing irregularities on vertical and overhead surfaces like concrete, brickwork, blockwork, and existing cement/sand renders.
Durable Finish: Produces a hard-wearing surface that can be left exposed or painted, m
ARDEX E 100 is an acrylic-based dispersion designed for enhancing screeding and rendering mortars for both internal and external applications. By incorporating ARDEX E 100, the compressive and tensile strengths, elasticity, and bond strength of modified mortars are significantly improved, while workability and plastic properties are enhanced without increasing the water/cement ratio. Additionally, ARDEX E 100 effectively reduces the formation of early-age cracks. It is also suitable for use in bonding slurries and grout mixtures with ARDEX A38 Rapid Hardening and Drying Cement for fl
ARDEX ARDURAPID A 45 is a fast-drying, slump-free mortar ideal for a range of internal repairs. This mortar sets in 15 minutes and can be walked on within 90 minutes at 20°C, regardless of application thickness. It is suitable for re-profiling and repairing concrete surfaces, filling cracks, making good around pipework and frames, and forming ramps and coves. When used as a wearing surface, ARDEX ARDURAPID A 45 requires a suitable protective coating.
Key Points:
Rapid Setting and Hardening: Sets in 15 minutes, allowing foot traffic after 90 minutes at 20°C.
Ver
Mapeguard WP Adhesive is a two-component, rapid-drying, elastic cementitious adhesive designed for bonding and sealing applications involving Mapeguard WP membranes and their accessories. This versatile adhesive is suitable for sealing overlaps of Mapeguard WP 200 and bonding accessories such as Mapeguard ST, Mapeguard IC, Mapeguard EC, and Mapeguard PC, making it ideal for both wall and floor areas.
Key Points:
Application Versatility: Designed for bonding and sealing overlaps of Mapeguard WP 200 and its accessories, including Mapeguard ST, IC, EC, and PC.
Two-Com
Latexplan Trade is a two-part smoothing compound that comprises a grey powder (part A) containing special cements, graded silica sands, and additives mixed with a synthetic rubber latex (part B). It can be walked on after approximately 1½ to 2 hours and is ready for flooring installation in about 12 hours, depending on thickness and ambient temperature. With a very low odour, it is suitable for use in confined spaces where work or occupancy must continue. Latexplan Trade is also compatible with Mapeproof ESM surface membranes, making it suitable for areas with residual or static moi
Latexplan Trade is a two-part smoothing compound that comprises a grey powder (part A) containing special cements, graded silica sands, and additives mixed with a synthetic rubber latex (part B). It can be walked on after approximately 1½ to 2 hours and is ready for flooring installation in about 12 hours, depending on thickness and ambient temperature. With a very low odour, it is suitable for use in confined spaces where work or occupancy must continue. Latexplan Trade is also compatible with Mapeproof ESM surface membranes, making it suitable for areas with residual or static moi
£5.52 - £13.65 ex. VATLiquid mortar tone is an Iron Oxide based liquid dye that provides permanent colour to all types of mortars, rendering, pointing and concrete. For more information on Cromer, please visit their website here. For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.Select options This product has multiple variants. The options may be chosen on the product page
£17.50 ex. VATMapetherm AR1 GG is a one component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems. A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories. To reinforce this, apply Mapetherm Net on top of this base coat render. The Silancolor Render System can then be applied on top. Mapetherm AR1 GG is ideal for use on insulation or render carrier board.
£5.52 ex. VATCromar Powder Mortar Tone is a permanent powder colourant for pigmenting all types of mortars, rendering, pointing and concrete. For more information on Cromer, please visit their website here. For our full list of grouts and adhesives, please click here. For primers and cleaners, please click here.Select options This product has multiple variants. The options may be chosen on the product page
£98.16 ex. VATMapei Malech Primer is a micronized acrylic-based primer in water dispersion. It’s generally used as a primer for wall surfaces, for example, concrete or cement mortar repairs. Before applying a coloured finishing coat of Elastocolor Paint or Elastocolor Rasante, it is advised to use Malech as a regulator of substrate absorption. Malech can also be used in the Aquaflex System cycle for the permanent encapsulation of asbestos, or as a primer for the covering layers of Aquaflex. It’s a micronized acrylic resin-based primer in water dispersion that penetrates better than trad
£2.20 - £10.15 ex. VATAlphaChem Mortar Plasticiser is designed to enhance the workability and freeze thaw resistance of brick and block laying mortars, reducing the likelihood of cracking and crazing. It may be used to replace or supplement the use of lime. BENEFITS - Mortar does not stiffen prematurely on the board but remains plastic. - Mortar does not segregate or ‘bleed’. - Mortar is less prone to drying out shrinkage. - Increased adhesive strength. - Up to 50% water reduction can be affected. - Inexpensive to use: allows cement contents to be reduced (depending on present mix design).Select options This product has multiple variants. The options may be chosen on the product page
£35.92 ex. VAT
