MapeWall GPR is a general purpose render for internal and external use. A grey powder basecoat render for masonry and blockwork, composed of cement, selected aggregates and special synthetic resins, which when mixed with water provides a render that is easy to apply on suitably prepared masonry substrates. This product can be applied by hand or with a rendering spray machine.
Mapetherm Net is great for reinforcing renders as a secondary layer. On top of this you can then add the Silancolor Render System.
Mapewall GPR is ideal for use on brickwork or masonr
Mapetherm AR1 GG is a one component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems. A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories.
To reinforce this, apply Mapetherm Net on top of this base coat render. The Silancolor Render System can then be applied on top.
Mapetherm AR1 GG is ideal for use on insulation or render carrier board.
Bond It Monster Mesh is a highly useful material for reinforcing render or basecoat plaster in construction applications. It is designed to provide anti-crack reinforcement in rendering systems and is commonly used to reinforce concrete, cement, screeds, and renders. Additionally, it finds applications in ETICS (External Thermal Insulation Composite Systems) for external wall insulation with various types of renders such as acrylic, polymeric, silicon, silicate, and mineral renders.
The key advantages of this alkali-resistant glass fibre woven mesh include:
Incredib
ARDEX AM 100 is a rapid-setting, grey sand and cement render designed to facilitate quick project turnaround. This preblended product requires only the addition of water to achieve a slump-free mortar that can be applied in a thickness range of 2-30mm in a single coat. The primary advantage of ARDEX AM 100 lies in its ability to accommodate both very thin and substantial layers, making it an ideal choice for applications where conventional sand and cement renders would be impractical due to drying time constraints or required thickness. Its versatility extends to a range of s
Silancolor Tonachino
Silancolor Tonachino is a silicone resin-based coating in paste form with great filling capacity for a rustic finish. It’s recommended for finishing off internal and external walls where particular environmental conditions are open to the growth of algae, mould, and fungi due to its excellent water-repellent properties.
Some application examples include:
Decorating façades effected by algae and mould, including façades with old paintwork (check suitability beforehand).
Decorating north-facing façades.
Decorating all types of cement and lime-
Select options
This product has multiple variants. The options may be chosen on the product page
Ultralite Rapid Flex S1 is a rapid-setting, flexible, low-dust adhesive with non-slip properties, ideal for installing ceramic, porcelain, and natural stone tiles on walls and floors, especially thin porcelain tiles. Developed with Mapei’s advanced Low Dust technology and more than 30% recycled materials, it offers up to 60% greater coverage than traditional adhesives, making it a sustainable, easy-to-handle option for both indoor and outdoor applications. Its lightweight, thixotropic formula ensures excellent grab on vertical surfaces, is compatible with various substrates, and ma
Select options
This product has multiple variants. The options may be chosen on the product page
Granirapid is a two-component, high-performance, flexible rapid-setting adhesive designed for installing ceramic, porcelain, natural stone, and agglomerate stone. This versatile adhesive is ideal for heavy-duty commercial and industrial applications and is suitable for both interior and exterior use, including balconies, terraces, and swimming pools. Granirapid effectively bonds a wide range of tile and mosaic types, such as ceramic, encaustic, terrazzo, and terracotta. It can be applied to various conventional substrates, including concrete, cement-based screeds, plywood (minimum th
Nivoplan is a versatile grey or white powder made from cement, selected aggregates, and special synthetic resins, designed for easy application on vertical surfaces using a trowel or rendering spraying machine. The bonding requirements depend on the substrate's porosity and the desired finish. To enhance its bonding properties, Planicrete can be added during mixing (1-2 litres per bag) as a partial replacement for water, which is especially crucial for thin applications over concrete or when the render will be covered with tiles or natural stone. As a normal-setting Portland-based pr
Select options
This product has multiple variants. The options may be chosen on the product page
Planicrete is a highly stable water dispersion of a specialized synthetic elastomer that is resistant to alkaline saponification and features a low glass transition temperature. This SBR (styrene-butadiene rubber)-based elastomer retains stability even after aging due to the tightly woven chemical binders that connect its polymer chains. This unique structure allows the polymer chains to adopt a parallel alignment when deformed, resulting in exceptional elasticity. Supplied as a highly fluid, white latex, Planicrete enhances the adhesion, plasticity, thixotropy, water retention, and
Select options
This product has multiple variants. The options may be chosen on the product page
Rapid Set is a fast-setting, grey cement-based adhesive for internal and sheltered external ceramic floor tile installations. Comprising special binders, synthetic resins, selected aggregates, and accelerators, it provides good bond strength within 3 hours, allowing light foot traffic for grouting and limited access. Floors are ready for full use after 24 hours and, once cured, Rapid Set is both water-resistant and frost-proof.
Key points:
Suitable for installing most ceramic and porcelain tiles, as well as natural stone indoors.
Designed for small to med
ARDEX AM 50 OCR is a versatile grey setting sand and cement render designed to facilitate quick tiling installations. This high-performance mortar simplifies the rendering process by requiring only the addition of water to create a slump-free mixture, which can be applied in a single coat ranging from 6mm to 20mm thick. Once applied, ARDEX AM 50 OCR allows for tiling in as little as 24 hours, significantly reducing project timelines. Its formulation ensures strong adhesion and durability on a variety of surfaces, making it ideal for both internal and wet areas such as showers. The re
Silancolor Basecoat is a coloured, silicone resin-based based paint in water dispersion, with micro-granular quartz and selected charges. It is used to even out the absorption of the substrate and promote bonding of multiple coats of paint or layered finishing materials from the Silancolor range.
Silancolor Basecoat works in synergy with coloured finishes to increase the duration of the protective finish and increase the water repellence of Silancolor finishing systems.
Surfaces treated with this have a uniformly rough finish which makes it easier to apply multiple finishing
Select options
This product has multiple variants. The options may be chosen on the product page
£16.18 ex. VATMapeWall GPR is a general purpose render for internal and external use. A grey powder basecoat render for masonry and blockwork, composed of cement, selected aggregates and special synthetic resins, which when mixed with water provides a render that is easy to apply on suitably prepared masonry substrates. This product can be applied by hand or with a rendering spray machine. Mapetherm Net is great for reinforcing renders as a secondary layer. On top of this you can then add the Silancolor Render System. Mapewall GPR is ideal for use on brickwork or masonr
£17.50 ex. VATMapetherm AR1 GG is a one component cementitious mortar for bonding, levelling and reinforcing thermal-insulating panels and thermal insulation systems. A grey or white powder made from cement, selected sand, synthetic resin and special additives with a fine grain size of up to 0.6 mm, developed according to a formula developed in MAPEI’s own research laboratories. To reinforce this, apply Mapetherm Net on top of this base coat render. The Silancolor Render System can then be applied on top. Mapetherm AR1 GG is ideal for use on insulation or render carrier board.
£46.47 ex. VATBond It Monster Mesh is a highly useful material for reinforcing render or basecoat plaster in construction applications. It is designed to provide anti-crack reinforcement in rendering systems and is commonly used to reinforce concrete, cement, screeds, and renders. Additionally, it finds applications in ETICS (External Thermal Insulation Composite Systems) for external wall insulation with various types of renders such as acrylic, polymeric, silicon, silicate, and mineral renders. The key advantages of this alkali-resistant glass fibre woven mesh include: Incredib
£26.00 ex. VATARDEX AM 100 is a rapid-setting, grey sand and cement render designed to facilitate quick project turnaround. This preblended product requires only the addition of water to achieve a slump-free mortar that can be applied in a thickness range of 2-30mm in a single coat. The primary advantage of ARDEX AM 100 lies in its ability to accommodate both very thin and substantial layers, making it an ideal choice for applications where conventional sand and cement renders would be impractical due to drying time constraints or required thickness. Its versatility extends to a range of s
£73.33 ex. VATSilancolor Tonachino Silancolor Tonachino is a silicone resin-based coating in paste form with great filling capacity for a rustic finish. It’s recommended for finishing off internal and external walls where particular environmental conditions are open to the growth of algae, mould, and fungi due to its excellent water-repellent properties. Some application examples include: Decorating façades effected by algae and mould, including façades with old paintwork (check suitability beforehand). Decorating north-facing façades. Decorating all types of cement and lime-Select options This product has multiple variants. The options may be chosen on the product page
£27.87 - £33.01 ex. VATUltralite Rapid Flex S1 is a rapid-setting, flexible, low-dust adhesive with non-slip properties, ideal for installing ceramic, porcelain, and natural stone tiles on walls and floors, especially thin porcelain tiles. Developed with Mapei’s advanced Low Dust technology and more than 30% recycled materials, it offers up to 60% greater coverage than traditional adhesives, making it a sustainable, easy-to-handle option for both indoor and outdoor applications. Its lightweight, thixotropic formula ensures excellent grab on vertical surfaces, is compatible with various substrates, and maSelect options This product has multiple variants. The options may be chosen on the product page
£18.05 ex. VATARDEX AM 50 OCR is a versatile grey setting sand and cement render designed to facilitate quick tiling installations. This high-performance mortar simplifies the rendering process by requiring only the addition of water to create a slump-free mixture, which can be applied in a single coat ranging from 6mm to 20mm thick. Once applied, ARDEX AM 50 OCR allows for tiling in as little as 24 hours, significantly reducing project timelines. Its formulation ensures strong adhesion and durability on a variety of surfaces, making it ideal for both internal and wet areas such as showers. The re
