EVERBUILD FILL ONCE is a revolutionary ready-mixed filler using Expanded Micro-Sphere Technology (EMT), designed for filling large or small holes in a single application, eliminating the need for multiple layers. It provides a smooth, fine finish that won’t shrink, requires minimal sanding, and can support nails or screws once fully dried. Ideal for repairs to plaster, wood, brick, stone, and rendering, it is lightweight, easy to apply, and dries quickly, allowing for painting or papering in just 30 minutes.
Key Points
Fills up to 50mm in one application, with no
Select options
This product has multiple variants. The options may be chosen on the product page
EVERBUILD FILL & SKIM is a ready-mixed plaster substitute made with lightweight polymer spheres, designed to provide a smooth, easy-to-apply finish that produces a professional result, even for DIY enthusiasts. It dries to a hard yet flexible finish, making it suitable for use on walls and ceilings, and can fill holes up to 25mm in one application. Once dry, it will not shrink, sag, or crack and is ready to paint or wallpaper within 24 hours, requiring little to no sanding.
Key Points:
Easy-to-apply patching plaster
Simple to smooth over large areas
Ready
EVERBUILD ONE STRIKE FILLER is a revolutionary ready-mixed lightweight filler designed for both professional and DIY use, ideal for preparing surfaces prior to painting or wallpapering. It fills up to 75mm deep in one application without the need for multiple layers, and it dries quickly, allowing the surface to be painted or wallpapered in just 30 minutes. The product requires little or no sanding and provides a smooth finish that won’t sag, even on ceilings.
Key Points:
Easy to apply and lightweight.
No sanding required, provides a smooth finish.
Non-shrin
Select options
This product has multiple variants. The options may be chosen on the product page
ARDEX A 35 MIX is a specially formulated blend of ARDEX A 35 cement and graded sand designed to create ultra-rapid drying floor screeds for internal applications. Utilizing 'RAPIDRY FORMULA' technology, ARDEX A 35 MIX allows for foot traffic just 3 hours after application, and both ceramic and natural stone tiles can be installed after only 24 hours, regardless of thickness. Additionally, resilient floor coverings such as carpet, vinyl, and wood can also be laid after 24 hours. This product achieves rapid strength and passes the BRE Screed (ISCR) Test in just 6 hours, surpassing the
Experience the joy of silence and true well-being with MAPESONIC CR, Mapei’s innovative solution for reducing impact and footstep noise in living spaces. This rubber and cork-backed sheet, made from recycled and recyclable materials, is available in 2 mm and 4 mm thicknesses and can be applied under various flooring types, including ceramic, stone, resilient, and laminated wood. MAPESONIC CR is easy to install, designed to enhance soundproofing without requiring the removal of old flooring, making it ideal for renovations. It meets the requirements of the Prime Ministerial Decree 5
Select options
This product has multiple variants. The options may be chosen on the product page
Mapetex is a specialized non-woven fabric designed to reduce stresses within the substrate, thereby maintaining the integrity of the tiled surface. When applied correctly, Mapetex effectively dissipates stresses in various types of floor substrates, helping to prevent cracks in the tile finish, particularly over imperfect surfaces. In many instances, it eliminates the need for additional overboarding with plywood or other materials, making it ideal for both restoration projects and new constructions, including those using underfloor heating systems. Produced using advanced techniques
Select options
This product has multiple variants. The options may be chosen on the product page
Planitop Fast 330 is a rapid-set, fibre-reinforced cementitious levelling mortar suitable for both internal and external applications. This versatile product can be applied in layers ranging from 3 to 30 mm, effectively evening out irregularities on walls and floors. Composed of a grey, one-component formula with very low emissions of volatile organic compounds (EMICODE EC1), it combines special cementitious binders, selected aggregates, synthetic resins, and additives developed in MAPEI’s Research & Development labs. When mixed with water, it offers excellent workability and h
Mapenet 150 is an alkali-resistant glass fiber mesh designed to reinforce waterproofing, anti-fracture membranes, and insulation coatings. It is particularly suitable for enhancing the waterproofing properties of MAPELASTIC and MAPELASTIC SMART membranes. The mesh is constructed from glass fibers treated with a special primer, ensuring resistance to alkalis as per EAD specification 040016-00-0404, which replaced ETAG 004 on October 28, 2020. Once the waterproofing layer is cured, Mapenet 150 provides reinforcement to help prevent cracks resulting from substrate movement or surface te
Mapelastic Turbo is a premium, two-component, rapid-drying waterproofing and crack-isolation membrane designed for both interior and exterior applications beneath ceramic tiles or stone in residential, commercial, and industrial environments that experience intermittent wet or submerged conditions. This cementitious-binder-based membrane, composed of fine-grained selected aggregates, special admixtures, and synthetic polymers in water dispersion, can be easily applied with a roller or brush, creating a robust barrier that protects adjacent rooms and lower floors from water damage. Ex
Mapelastic Turbo is a premium, two-component, rapid-drying waterproofing and crack-isolation membrane designed for both interior and exterior applications beneath ceramic tiles or stone in residential, commercial, and industrial environments that experience intermittent wet or submerged conditions. This cementitious-binder-based membrane, composed of fine-grained selected aggregates, special admixtures, and synthetic polymers in water dispersion, can be easily applied with a roller or brush, creating a robust barrier that protects adjacent rooms and lower floors from water damage. Ex
Mapeprim SP is a two-component primer (A+B) that, after thorough mixing and application to the substrate, dries to form a compact, water-resistant film that is durable against aging. As it is water-dispersed, Mapeprim SP poses no flammability issues and can be stored without special precautions. This synthetic resin-based primer guarantees excellent adhesion with smoothing and levelling compounds, as well as cementitious mortars, specifically designed for non-absorbent and challenging substrates. Mapeprim SP is particularly effective on smooth, impervious surfaces, such as existing t
Keraflex Maxi S1 is a high-performance, deformable cementitious adhesive available as a grey or white powder made from cement and fine graded sands, enriched with synthetic resins and special additives from MAPEI’s Research and Development Laboratories. It offers excellent workability, low dust, and minimal volatile organic compound emissions. When mixed with water, it creates a highly thixotropic, low-viscosity mortar suitable for bonding large ceramic, porcelain, and natural stone tiles (3-15 mm adhesive thickness) and features:
Key Points:
Excellent adhesion wi
Select options
This product has multiple variants. The options may be chosen on the product page
£3.66 - £6.22 ex. VATEVERBUILD FILL ONCE is a revolutionary ready-mixed filler using Expanded Micro-Sphere Technology (EMT), designed for filling large or small holes in a single application, eliminating the need for multiple layers. It provides a smooth, fine finish that won’t shrink, requires minimal sanding, and can support nails or screws once fully dried. Ideal for repairs to plaster, wood, brick, stone, and rendering, it is lightweight, easy to apply, and dries quickly, allowing for painting or papering in just 30 minutes. Key Points Fills up to 50mm in one application, with noSelect options This product has multiple variants. The options may be chosen on the product page
