Bond It A70 Studlock Anaerobic Adhesive
- Suitable For: fixing and sealing plugs, through bolts, and studs
- Area of use: INT & EXT
- Volume: 25ml, 50ml
- Container Type: bottle
- Type: adhesive
- Colour: green
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
This high-strength, anaerobic adhesive is designed for the permanent retention and sealing of threaded fasteners, sleeves, and bearings. It is resistant to fuels, oils, hydraulic fluids, and refrigeration fluids, while also providing lubrication during assembly for accurate torquing and corrosion protection. Once the adhesive sets, it cannot be dismantled, making it ideal for preventing rust and corrosion. To use, coat the threads and ensure the adhesive is present at the locking position; it begins to cure when air is excluded from the bonding system.
Key Points:
- High bond strength and resistance to fuels and oils.
- Provides lubrication during assembly for accurate torquing.
- Permanent fixing that cannot be dismantled.
- Protects against corrosion and withstands vibration.
Shelf Life: Minimum of 12 months from the date of manufacture when stored at +20°C in unopened bottles.
Storage Conditions: Store in a closed, upright container between +5°C and +20°C in dry, dark conditions. Shelf life will be extended at lower temperatures. Protect from frost and direct sunlight.
For more in our range of adheives, please click here. For our full range of products from Bond It, please click here.
For more information on Bond It and their products, you can visit their website here.
Bond It A70 STUDLOCK is ideal for fixing and sealing plugs, through bolts, and studs into castings, eliminating the need for split pins, double nutting, and spot welds. It is vibration-proof and provides lubrication during assembly to ensure accurate torquing and protection against corrosion. Using A70 STUDLOCK enhances throughput and efficiency in the assembly process.
Preparation
Remove heavy oil and grease contamination from parts. Best results are achieved with clean components. Shake the product thoroughly before use.
Application
Coat the threads and ensure the adhesive covers the locking position. The adhesive begins to cure when air is excluded from the bonding system. Follow the handling and strength times provided below.
Bonding Times
At room temperature (+20°C) and a 0.15mm fastener gap size:
- Handling time: Initial strength in approximately 10 minutes
- Full working strength: 6-12 hours
- Ultimate cure: 24 hours
Cure rate depends on substrate, bond gap, and temperature. Smaller gaps and higher temperatures will achieve full bond strength faster.
Cleaning
Wipe away excess adhesive with a dry cloth. Once dried, the adhesive can be removed mechanically using a wire brush.
Limitations
A70 STUDLOCK should not be used on oily or greasy surfaces. It is designed for metal-to-metal bonding. Users should confirm its efficiency with engineering rubbers and plastics. The bond strength on stainless steel may be significantly lower and may require an activator for certain grades. Users must verify the product’s suitability for their specific application. Not recommended for use in oxygen-rich systems or with chlorine or other strong oxidizing materials.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £32.23 inc. VAT
£26.86 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.