ARDEX A 826 Ultra Fine Finishing Plaster White 25kg
£69.12 inc. VAT
£57.60 ex. VAT
- Product ID: 56110
- Suitable For: smoothing walls and ceilings
- Area of use: INT
- Application Method: trowel
- Volume: 25KG
- Container Type: bag
- Type: plaster
- Colour: white
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
ARDEX A 826 is a brilliant white, rapid-hardening, gypsum-based plaster designed to create a smooth, ultra-fine finish on interior walls and ceilings, perfect for achieving a true feather-edge finish. It provides an ideal base for paint and wallpaper, with a non-shrink, tension-free formulation that resists cracking even in thin applications. This plaster can be painted within an hour, making it highly efficient for creating a high-quality, smooth surface on a range of substrates, including plasterboard, pre-rendered walls, concrete backgrounds, aerated concrete, lightweight blocks, and construction boards.
Key Points:
- ARDEX A 826 is a rapid-hardening, gypsum-based plaster for smooth interior wall and ceiling finishes.
- Creates an ideal surface for paint and wallpaper, with an ultra-fine, feather-edge finish.
- Dries quickly and can be painted in as little as one hour, making it highly efficient.
- Suitable for various substrates, including plasterboard, concrete, lightweight blocks, and construction boards.
Coverage
Approximately 27m² at 1mm thickness.
Storage and Shelf Life
Store the product in its original packaging, off the ground, in a cool, dry area, and protected from extreme temperatures. With proper storage, the product has a 12-month shelf life. Reseal any partially used bags to maintain quality.
For more in our range of plasters, please click here. For our full range of Ardex products, click here.
Alternatively, you can visit the Ardex wesite by clicking here.
Substrate Preparation
Surfaces must be rigid, dry, clean, and free from dust, grease, and other barriers to adhesion. ARDEX A 826 adheres directly to absorbent construction boards and cement or gypsum-based plasters, with most absorbent surfaces not requiring priming; however, a scratch coat is recommended. For concrete or highly absorbent surfaces, priming with ARDEX P 51 Concentrated Water-Based Primer and Bonding Agent is advised—dilute with 3 parts water to 1 part primer, apply with a brush, and allow to dry. Smooth and dense surfaces, such as varnished finishes and oil-based paints, may need priming with either ARDEX P 82 Water Dispersed Epoxy Primer or ARDEX P 4 Ready Mixed Rapid Drying Multi-Purpose Primer. If unsure, it’s best to perform a trial application using compatible primers.
Mixing
To mix ARDEX A 826, gradually combine 2 parts by volume of powder with 1 part by volume of clean water while stirring until a lump-free consistency is reached. For larger quantities, using a drill with an appropriate mixing paddle is recommended, while hand mixing is suitable for smaller amounts. Allow the mixture to stand for 2-3 minutes to let the high-performance additives dissolve fully, then remix to achieve a smooth, creamy consistency. The mixed product is easy to apply and has a working time of approximately one hour.
Application
The rapid hardening properties of ARDEX A 826 allow for smoothing and finishing entire walls in a single application, unlike traditional gypsum-based plasters that require multiple stages. It can be applied using a trowel, blade, or filling knife, filling holes gradually from the edges to prevent air bubbles. Any imperfections can be smoothed out with a damp sponge before drying, eliminating the need for sanding. If necessary, the hardened product can be sanded smooth, or additional coats can be applied after the initial surface has set. The product should be applied at temperatures above 5°C, and a 1mm layer typically hardens to a crack-free surface within 1-2 hours.
Thicknesses and Packaging
ARDEX A 826 can be applied in thicknesses ranging from feather edge up to 10mm, covering approximately 27m² at 1mm thickness. The product is packaged in paper sacks lined with polyethylene, with a net weight of 25kg. For optimal storage, keep the product in its original packaging, off the ground, in a cool, dry place, and away from excessive temperatures. With proper storage, the shelf life is 12 months; ensure that partially used bags are resealed.
Drying Times
Drying times vary based on application thickness and ambient conditions, with skim coats potentially drying in as little as 1 hour. Thicknesses between 0-3mm can be painted once the surface is sufficiently hard to sand. Priming is generally unnecessary after application, but to prevent uneven drying of paints on partial applications, it may be necessary to prime these areas or the entire surface with ARDEX P 51 Concentrated Water-Based Primer and Bonding Agent, diluted with 3 parts water to 1 part primer and applied with a brush.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
From: £102.55 inc. VAT
£85.46 ex. VAT
From: £102.55 inc. VAT
£85.46 ex. VAT -
-
£42.91 inc. VAT
£35.76 ex. VAT -
£101.72 inc. VAT
£84.77 ex. VAT
£101.72 inc. VAT
£84.77 ex. VAT -
From: £21.80 inc. VAT
£18.17 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £4.21 inc. VAT
£3.51 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
£67.04 inc. VAT
£55.87 ex. VAT
From: £37.84 inc. VAT
£31.53 ex. VAT
£69.42 inc. VAT
£57.85 ex. VAT
£67.46 inc. VAT
£56.22 ex. VAT
From: £36.71 inc. VAT
£30.59 ex. VAT
From: £14.11 inc. VAT
£11.76 ex. VAT
From: £47.33 inc. VAT
£39.44 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.