- Suitable For: installing a wide range of flooring materials
- Area of use: INT
- Application Method: trowel
- Volume: 6KG 14KG
- Container Type: tub
- Type: adhesive
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
ARDEX AF 2365 is a versatile, water-based floor covering adhesive that is low in odor and free from solvents. This acrylic emulsion adhesive not only demonstrates exceptional application properties but is also resistant to biodegradation and plasticiser migration, making it an ideal choice for a variety of flooring materials. Furthermore, ARDEX AF 2365 complies with the EMICODE license ‘EC1 PLUS,’ ensuring it meets the strictest emission standards. It is designed for universal use, making it suitable for installing a wide range of floor coverings, including vinyl, textiles, linoleum, and rubber materials up to 2.5mm thick.
Key Points:
- Environmentally Friendly: ARDEX AF 2365 is a water-based, low-odor adhesive that is solvent-free and has low emissions, making it a sustainable choice for flooring projects.
- Versatile Applications: This adhesive is a true universal solution, ideal for installing various floor coverings, including vinyl, textiles, linoleum, and rubber up to 2.5mm thick.
- Compatibility: ARDEX AF 2365 is compatible with all ARDEX Latex and Water-Based Levelling and Smoothing Compounds, suitable for both commercial and domestic applications.
- Durability: The adhesive offers good resistance to plasticiser migration and biodegradation, ensuring a long-lasting bond even under challenging conditions.
Storage: ARDEX AF 2365 has a shelf life of at least 12 months when stored properly in its original, unopened container at temperatures between 5°C and 30°C.
For more in our range of adhesives products, please click here, and for more in our range from Ardex, click here.
Alternatively, you can visit the Ardex website here.
ARDEX AF 2365 is a versatile universal adhesive designed for installing a wide range of flooring materials, including vinyl floorcoverings, textiles, linoleum, and rubber with a thickness of up to 2.5mm. This adhesive is compatible with all ARDEX Latex and Water-Based Levelling and Smoothing Compounds, making it suitable for both commercial and residential applications. Additionally, ARDEX AF 2365 is appropriate for use with chairs that have castor wheels.
PRIMING
While priming is not necessary, it can be beneficial on highly absorbent surfaces to use ARDEX P 51 Priming and Bonding Agent diluted at a ratio of 1:3 with cold, clean water. This will help maintain the adhesive’s working time and ensure optimal coverage.
SUBSTRATE PREPARATION
The subfloor must include an effective damp proof membrane and be dry, with a relative humidity of 75% or below. If there is no effective damp proof membrane or if the relative humidity exceeds 75% RH, consult the ARDEX Moisture Control brochure or contact ARDEX Technical Services for guidance on product selection. The subfloor should be hard, clean, sound, and smooth, adhering to the relevant clauses of BS 8203, BS 5325, and BS 8204. Before applying ARDEX AF 2365, remove any dust using appropriate vacuum equipment, as dust can negatively impact both coverage and performance. For an even surface, any necessary levelling, smoothing, or repairs should be carried out with the appropriate ARDEX product and allowed to dry prior to adhesive application. Uneven subfloors can be levelled with suitable ARDEX Latex or Water-Based Levelling and Smoothing Compounds, such as ARDITEX NA or ARDEX K 39. For repairs up to 50mm thick, use ARDEX ARDURAPID A 45 Rapid Drying and Hardening Internal Repair Mortar as per the product data sheet. Where needed, install fabricated underlays like flooring-grade plywood (SP101) over existing timber bases, ensuring they are compatible with the floorcovering and at the appropriate equilibrium moisture content for service conditions.
MIXING
ARDEX AF 2365 is ready to use; however, thorough mixing is recommended to ensure even dispersion of the polymers before application.
APPLICATION
Maintain the installation area and subfloor at the temperatures specified by the floorcovering manufacturer and the relevant clauses of BS 8203 and BS 5325 for at least 48 hours before installation, during installation, and for 48 hours after installation. Apply ARDEX AF 2365 evenly to the prepared substrate using the appropriate serrated trowel, held at approximately a 60-degree angle to maximize coverage and prevent adhesive pooling. Floorcoverings should be placed directly into the wet adhesive on absorbent backgrounds after an airing time of 10-20 minutes, depending on ambient conditions and floorcovering type. Allowing the adhesive to air enhances initial grab. Only apply enough adhesive to cover within the working time. Periodically check for adhesive transfer to the back of the floorcovering, particularly for rubber materials that require transfer upon placement in semi-wet adhesive. Remove air pockets using a cork board or rubbing tool while the adhesive is still wet, and roll the flooring using a 68kg roller or smoothing tool. Start rolling from side to side, then end to end, ensuring good contact and minimizing the potential for adhesive serration grin-through. Some floorcoverings may require additional rolling or smoothing. Heat welding should only begin after the adhesive has sufficiently dried. Avoid wet cleaning the floor immediately after installation; allow at least 48 hours for the adhesive bond to develop at 20°C. When working with adhesive, dispose of any excess material moved across the subfloor into a separate container to prevent contamination issues.
UNDERFLOOR HEATING
Commission underfloor heating systems according to the manufacturer’s instructions; if unavailable, follow the guidelines outlined in BS 8203, BS 5325, and BS 8204. Gradually raise the substrate temperature, typically by 5°C per day, to reach full operating temperature, maintaining this for a designated period before gradually reducing it to prevent shrinkage before floorcovering installation. If moisture tests are needed to confirm the substrate’s relative humidity, turn off the underfloor heating system 48 hours before testing. After testing, or if moisture testing is unnecessary, stabilize the heating system to room temperature, not below 15°C, prior to installing the floorcovering. Repair or smooth the substrate surface with the appropriate ARDEX product and allow it to dry. Acclimatize the floorcovering to the substrate temperature before installation with ARDEX AF 2365. After installation, maintain a constant temperature for at least 48 hours for proper adhesive curing before gradually increasing the temperature to the normal operating levels. Avoid placing any static or dynamic loads, including loaded trolleys and furniture, on the flooring until the adhesive has fully set, typically 48 hours at 20°C.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £14.11 inc. VAT
£11.76 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.