Ardex R3E Moisture Tolerant Primer
- Suitable For: damp concrete and cementitious surfaces
- Area of use: INT
- Application Method: brush
- Time to full cure: 24 hours
- Volume: 6kg 25kg
- Container Type: tin
- Colour: clear
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
Coverage: Approximately 24 square meters per 6kg unit.
Storage and Shelf Life: Store in a dry environment. ARDEX R 3 E Solvent-Free Epoxy Primer has a shelf life of at least 12 months when kept in its original, unopened containers.
For more in our range of primers, please click here. For our full range of Ardex products, click here.
Alternatively, you can visit the Ardex website by clicking here.
ARDEX R 3 E Moisture Tolerant Epoxy Primer is a two component solvent free epoxy resin for use on concrete and cementitious surfaces that have damp surfaces (e.g. from water spillages or rain) prior to installing polyurethane screeds and self-smoothing epoxy floor coatings.
Surface Preparation
Ensure that the concrete or screed substrate is hard, sound, and free from dust, paint, lime coatings, plaster, curing agents, laitance, adhesive residues, and other materials that could impair adhesion. Prior to mechanical preparation, use ARDEX DGR Degreaser to remove polish, wax, grease, oil, and other contaminating substances. Prepare all substrates with appropriate mechanized surface preparation equipment before applying ARDEX products. After mechanical preparation, thoroughly remove all dust and fines using a combination of brushing and industrial vacuum extraction. The substrate must be prepared to a depth that exposes the aggregate and provides a solid surface ready for treatment.
Note: Movement joints or cracks in the concrete that are subject to differential movement, such as expansion joints, should be carried through to the finished surface and properly sealed.
Mixing
Before mixing, thoroughly stir each component of the ARDEX R 3 E Solvent-Free Epoxy Primer. Pour the entire contents of the hardener container (Component B) into the resin container (Component A) and mix thoroughly for at least 3 minutes using a heavy-duty slow-speed drill and spiral paddle. Reintroduce some of the mixed material back into the hardener container to activate any residual product, then pour it back into the resin container and mix for an additional 30 seconds. This method ensures consistent product quality and allows for easier disposal of leftover material. The mixed primer has a working time of up to 20 minutes at 20°C; any remaining material should be discarded safely after this period.
Note: ARDEX R 3 E will generate heat and reduce working time if left in the mixing container or stored in bulk. Always wear suitable eye/face protection and gloves during mixing.
Application
Apply the mixed material promptly to the floor using a brush or a short/medium pile roller, as the self-heating of the mixture will decrease working time. One or more coats may be necessary to achieve a uniform coating and address variations in surface porosity. Ensure all movement joints in the subfloor are carried through the topping and properly sealed. Construction joints and non-moving cracks can be overlaid, but any movement in the floor will reflect through the system. Isolation joints should be incorporated in areas with anticipated high thermal movement, such as around ovens and freezers.
When using ARDEX Fine Aggregate as a sand blind, apply it while the ARDEX R 3 E is still wet. Fully cover the wet surface with dry ARDEX Fine Aggregate. Remove any excess aggregate by brushing or vacuuming after the ARDEX R 3 E has set, which typically leaves a sandpaper-like finish.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.60 inc. VAT
£3.00 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £4.21 inc. VAT
£3.51 ex. VAT
From: £3.48 inc. VAT
£2.90 ex. VAT
From: £25.50 inc. VAT
£21.25 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.