ARDEX SD-T B Rapid Drying Indusrial Base Mix Grey 25kg
£38.34 inc. VAT
£31.95 ex. VAT
- Product ID: 18293
- Suitable For: pre-levelling concrete surfaces before the application of ARDEX K 80
- Area of use: INT
- Application Method: trowel
- Volume: 25KG
- Container Type: bag
- Type: concrete
- Colour: grey
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
ARDEX SD-T B base mix is specifically formulated to pre-level concrete surfaces before the application of ARDEX K 80. This Industrial Floor System combines durability, low maintenance, and ease of application with the innovative ARDEX ‘Rapidry Formula,’ which chemically binds the mixed water, enabling the product to dry quickly while developing strength. When thick applications are needed, ARDEX SD-T B can be applied at depths ranging from 6mm to 50mm to achieve a level base, and it allows for a minimum thickness of 5mm of ARDEX K 80 to be applied just hours after its application. For installing ceramic or natural stone tiles, a minimum thickness of 10mm of ARDEX SD-T B is recommended.
Key Points:
- Pre-Leveling: ARDEX SD-T B is designed to pre-level concrete surfaces for ARDEX K 80 application.
- Rapid Drying: The ‘Rapidry Formula’ allows for quick drying and strength development.
- Thickness Range: Can be applied from 6mm to 50mm to create a level base.
- Tile Installation: Requires a minimum thickness of 10mm when fixing ceramic or natural stone tiles.
Coverage: ARDEX SD-T B base mix has a coverage rate of approximately 1.87 kg per square meter per millimeter of thickness. For example, one bag will cover around 1.3 m² at a thickness of 10 mm. Note: This coverage estimate assumes a flat, level surface; additional material should be considered for rough or uneven areas.
Storage and Shelf Life: ARDEX SD-T B base mix should be stored in unopened packaging, elevated from the ground, in cool, dry conditions, and protected from excessive drafts. When stored properly as outlined, the shelf life is 12 months from the date indicated on the packaging.
For more in our range of concrete products, please click here, and for more in our range from Ardex, click here.
Alternatively, you can visit the Ardex website here.
Ardex SD-T B is ideal for use over existing concrete surfaces, a base for laying tiles and natural stone, and a base to Ardes K 80 topping layer.
Substrate Preparation
The concrete surface must be solid, stable, and free from dust and other contaminants such as paint, lime coatings, plaster, curing agents, laitance, and adhesive residues, which could hinder adhesion to the substrate. The concrete must have sufficient strength to support ARDEX SD-T B, with BS 8204-3 recommending a minimum surface tensile strength of 0.8 N/mm² for concrete bases receiving wearing or leveling screeds. Note: For heavy-duty applications, the minimum surface tensile strength should be 1.5 N/mm². Prior to mechanical preparation, use an appropriate degreaser to eliminate polish, wax, grease, oil, and other contaminants. Concrete surfaces must be mechanically prepared through scabbling, grinding, or shot blasting, and then thoroughly vacuumed before priming. All surfaces require priming; it is advisable to use a sand-blinded application of ARDEX R 3 E Solvent Free Epoxy Primer or ARDEX R 5 E Rapid Curing Solvent Free Epoxy Primer as specified in the technical data sheet. The sand for creating a blinded/aggregate keyed surface should be ARDEX Fine Aggregate, sized between 1 to 1.5 mm. Weak or overwatered concrete surfaces should be mechanically prepared down to sound concrete. Direct-to-earth concrete subfloors must be dry and have an effective damp-proof membrane, such as ARDEX DPM 1 C or ARDEX DPM 1 C R. Any joints or cracks in the concrete that may experience differential movement, such as movement joints, should extend to the surface of the ARDEX K 80. Note that ARDEX SD-T B should not be used in external applications or areas prone to wetting.
Mixing ARDEX SD-T B Base Mix
When mixing ARDEX SD-T B base mix, use 3.5 to 3.75 liters of water per 25 kg bag. Do not exceed 3.75 liters of water for optimal results.
Application of ARDEX SD-T B
Pour the mixed ARDEX SD-T B compound onto the prepared subfloor. The mortar will flow and self-level during the first 10 minutes of its 30-minute working time at 20°C. For thicker applications, an ARDEX pin leveller with height adjustment should be used. Depending on the desired finish, a spiked roller can be employed for final touches. The minimum recommended application temperature is 10°C. For large subfloors requiring leveling or thick applications, it is advisable to pump the ARDEX SD-T B Industrial Floor System.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
£46.13 inc. VAT
£38.44 ex. VAT
£46.13 inc. VAT
£38.44 ex. VAT -
£362.51 inc. VAT
£302.09 ex. VAT
£362.51 inc. VAT
£302.09 ex. VAT -
£241.68 inc. VAT
£201.40 ex. VAT
£241.68 inc. VAT
£201.40 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £10.07 inc. VAT
£8.39 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £2.86 inc. VAT
£2.38 ex. VAT
From: £2.69 inc. VAT
£2.24 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.