Ardex X 7001 Pourable Floor Tile & Stone Adhesive
£48.34 inc. VAT
£40.28 ex. VAT
- Product ID: 18314
- Suitable For: adhering certain acoustic matting systems before tiling
- Area of use: INT
- Application Method: trowel
- Time to full cure: 2 hours
- Volume: 20kg
- Container Type: bag
- Type: tile adhesive
- Colour: grey
- Brand: Ardex
- Manufactuer: Ardex
- Box Size: 1
For more in our range of tile adhesives, please click here, and for more in our range from Ardex, click here.
Alternatively, you can visit the Ardex website here.
ARDEX X 7001/ARDEX X 7001W is also suitable for adhering certain acoustic matting systems before tiling and is recommended for internal use only. It can be used for fixing tilebacker boards to wood-based sheets and boards. The mixed mortar has a pourable consistency, allowing for solid bedding of tiles without the need to butter the back of the tiles.
Surface Preparation
Concrete:
Allow a minimum of 6 weeks, preferably 12 weeks, drying time before tiling new concrete. Mechanically clean the surface and remove any curing agents.
Cement/Sand Screed:
Apply a wood float finish and prevent rapid drying for 7 days. Allow the surface to air dry for at least 3 weeks before tiling.
Calcium Sulfate-Based Screeds (Anhydrite):
Ensure they are laid and prepared according to manufacturer recommendations. Sand the surface and confirm a moisture content of 0.5% or less. Prime with ARDEX P 51, diluted 3 parts water to 1 part primer.
Existing Glazed Ceramic Tiling:
Ensure existing tiles are well adhered. Thoroughly clean and rinse off before priming with ARDEX P 82 or ARDEX P4. Suitable for internal dry areas only.
Flooring Grade Asphalt (Sanded):
If the sand key is well adhered, no primer is required. For internal areas only. If the sand key is poor, proceed as for smooth asphalt.
Flooring Grade Asphalt (Smooth):
Prime with ARDEX P 82 for internal dry areas only.
Timber Sub-Floors:
Ensure boards are dry, conditioned to the environment, rigidly fixed, and free from adhesion barriers. Sand surfaces to remove polish, wax, or old adhesives. If additional stiffening is required, overlay with 15mm plywood or flooring-grade chipboard, sealed on the back and edges, and screw or nail down at 300mm centers. The wood surface must be stable and rigid to withstand imposed loads without deflection. Ceramic floor tiles should not be used on wood-based boards in wet or external areas. For damp areas, oversheet the wood floor with a waterproof tile backing or matting system.
Priming
Prime the prepared board surface with ARDEX P 51 primer, applied undiluted by brush in a single coat. Allow it to dry for at least 1 hour at 20°C.
Mixing
Add ARDEX X 7001/ARDEX X 7001W powder to clean water in a container and mix thoroughly to create a fluid, workable mortar. Use a mixing paddle with a 10mm chuck and a variable-speed electric drill. The ratio is approximately 3.5 parts powder to 1 part water, with a 20kg bag requiring around 4.5 litres of water. The mortar is ready to use immediately, with a pot life of around 1 hour at 20°C. Apply the adhesive at temperatures above 5°C.
Fixing Technique
Apply the mixed mortar onto the prepared sub-floor and comb through with a notched trowel to create straight ribs. Ensure solid bedding with no voids. ARDEX X 7001/ARDEX X 7001W has an extended open time of at least 30 minutes, though tiles should ideally be fixed within 15 minutes. If the mortar begins to stiffen, discard it; do not add water. Adjust tiles for up to 15 minutes after fixing.
For flat-backed tiles, use a 5mm x 5mm notch trowel, 8mm x 8mm for general floor tiling, and 10mm x 10mm for keyed extruded tiles. Ensure solid bedding is achieved, particularly on timber substrates, where the bed thickness should be between 1mm and 4mm.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
-
-
-
From: £8.82 inc. VAT
£7.35 ex. VAT -
£50.93 inc. VAT
£42.44 ex. VAT -
From: £3.56 inc. VAT
£2.97 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £11.34 inc. VAT
£9.45 ex. VAT
From: £6.59 inc. VAT
£5.49 ex. VAT
From: £3.60 inc. VAT
£3.00 ex. VAT
From: £4.36 inc. VAT
£3.63 ex. VAT
From: £4.21 inc. VAT
£3.51 ex. VAT
From: £3.48 inc. VAT
£2.90 ex. VAT
From: £25.50 inc. VAT
£21.25 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT
£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT
£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.