- Suitable For: preparation of bitumen surfaces and roofing felt
- Area of use: EXT
- Application Method: brush/roller
- Volume: 2.5L
- Container Type: tin
- Type: primer
- Colour: light blue
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Bond It Seal It Roof Seal Bleed Blocker Primer is a solvent-free primer is designed to prepare bitumen surfaces for the application of Roof Seal Liquid Membrane or Easiseal Pro Weatherproofing Compound. It enhances the bond strength of these products to bitumen, asphalt, and felt substrates, ensuring a durable and effective seal. The primer is quick and easy to use, and it also blocks surface staining from bitumen coatings.
- Enhances bond strength to bitumen, asphalt, and felt substrates.
- Quick and easy application.
- Blocks surface staining from bitumen coatings.
- Suitable for Roof Seal Liquid Membrane and Easiseal Pro.
For all other Bond-it products on our website, please click here. For our full range of roofing products, click here.
For any further information you may need on Bond-it, please visit their website here.
Bond It Seal It Roof Seal Bleed Blocker Primer improves the adhesion of Seal It Liquid Membrane and Easiseal Pro to bitumen, asphalt, and felt surfaces. Easy and fast to apply. Prevents surface staining from bitumen coatings.
APPLICATION
Application Conditions
- The temperature during the primer application must be above 5°C.
Preparation and Application
- The primer is light blue to identify treated areas.
- Stir BLEED BLOCKER before use to ensure the pigment and polymer are fully dispersed.
- Apply a single coat of SEAL IT BLEED BLOCKER with a brush or roller, following the coverage rate to ensure the minimum thickness is achieved.
- Allow it to fully cure, typically overnight, though cold weather may require up to 48 hours.
- The product dries to a light blue film.
- If a second coat is needed, apply it only after the first coat has fully cured.
Coverage and Curing
- Ensure complete coverage of bituminous materials with SEAL IT BLEED BLOCKER before applying SEAL IT LIQUID MEMBRANE.
- Pay special attention to rough surfaces like bitumen felt, as any gaps in primer coverage can cause product failure.
- Bitumen-based surfaces need at least two coats of primer to prevent SEAL IT LIQUID MEMBRANE system failure.
- Seams and edges might require a third coat, or you can use SEAL IT CRACKS AND EDGING SEALER (refer to its TDS).
Final Application
- Proceed with SEAL IT LIQUID MEMBRANE or EASISEAL PRO as per the technical datasheet or packaging details.
- Using SEAL IT REINFORCING MAT within the SEAL IT LIQUID MEMBRANE coating can extend the product’s lifespan over bitumen substrates.
Testing and Compatibility
- Test a small, discreet area (approximately 1m²) with SEAL IT LIQUID MEMBRANE before full application to check for adverse reactions with the substrate.
- Any color of SEAL IT LIQUID MEMBRANE or EASISEAL PRO can be used after proper primer application, though incomplete coverage or water-based bitumen coatings may cause discoloration.
You must be logged in to post a review.
Elementlength | |||||||
up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £51.83 inc. VAT
£43.19 ex. VAT
-
£3.24 inc. VAT
£2.70 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.83 inc. VAT
£2.36 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£8.14£1.19 inc. VAT£6.78£0.99 ex. VAT£8.14£1.19 inc. VAT£6.78£0.99 ex. VATARBO Arbosil 1070 represents a single-component, Low Modulus Silicone Sealant with Fire-Resistant properties. It undergoes curing upon exposure to moisture vapor, ultimately transforming into a highly flexible silicone rubber material. For more information on Arbo, please visit their website here. For more in our range of sealants, please click here. For application guns to use with this product, please click here. -
£3.61£1.19 inc. VAT£3.01£0.99 ex. VAT£3.61£1.19 inc. VAT£3.01£0.99 ex. VATBond It LMH25 is a tough, flexible hybrid sealant ideal for installing internal and external window and door frames. Can also be used for sealing expansion and connection joints between most common substrates, without the use of a primer. PLEASE NOTE: THIS PRODUCT HAS A SHELF LIFE OF ONE MONTH BENEFITS - Solvent‐free & low odour. - Easy to tool and finish. - Can be overpainted with water based paints. - UV resistant. - Quick curing. - Contains no isocyanates, solvents, silicone and phthalates. - Excellent adhesion to most surfaces (even moist surf
Reviews
There are no reviews yet.