Bond It Stabilising Solution 5L
- Product ID: BDH130
- Suitable For: pre treating surfaces
- Area of use: INT & EXT
- Application Method: brush/roller
- Volume: 5L
- Container Type: bottle
- Type: treatment
- Colour: white
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
This white, ready-to-use, water-based treatment is designed for bonding and priming surfaces before painting and decorating. It is suitable for both interior and exterior use, and can even be applied to damp surfaces. This product stabilizes poor surfaces, seals and binds chalky or weathered areas, and provides a solid base for further decoration. It is quick-drying and works well on a variety of substrates, including concrete, cement, plaster, plasterboard, renders, pebble dash, and MDF. However, it should not be applied when temperatures are below 5°C or if rain or frost is imminent.
Key Points:
- Solvent-Free: Safe for both users and the environment.
- Quick Drying: Allows for faster application and quicker completion.
- Surface Stabilization: Strengthens and seals poor or weathered surfaces.
- Versatile Application: Can be applied to most surfaces, including damp ones, for interior and exterior use.
Shelf Life: 24 months from the date of manufacture when stored in unopened bottles.
Storage Conditions: Store in a cool, dry place in the original sealed container, between +5°C and +30°C. Protect from frost, high temperatures, and direct sunlight.
Coverage: Approximately 6m² per litre, depending on the porosity of the substrate.
For more in our range of primers and cleaners, please click here. For our full range of products from Bond It, please click here.
For more information on Bond It and their products, you can visit their website here.
Ideal as a pre-treatment for old, weathered, chalky, or porous surfaces, this product is suitable for a wide range of substrates, including concrete, cement, plaster, plasterboard, renders, pebbledash, MDF, and more.
Preparation
Ensure all surfaces are clean and free from contaminants, including loose or flaking material. Remove any mould or algae using MOULD-STOP or PATIO BLASTER before application.
Application
Do not dilute. Stir well and apply using a brush, roller, or airless spray. For porous or powdery surfaces, a second coat may be required, but allow 12 hours of drying time between coats.
Limitations
Do not apply STABILIZING SOLUTION when the temperature is below +5°C or when rain or frost is expected. However, this product can be applied to damp substrates.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
From: £8.03 inc. VAT
£6.69 ex. VAT
From: £3.11 inc. VAT
£2.59 ex. VAT
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.