Bond It Tanking Slurry 20kg
- Suitable For: tanks, pits, swimming pools, etc.
- Area of use: INT & EXT
- Application Method: brush
- Time to full cure: 6-8 hours
- Volume: 20kg
- Container Type: bag/tub
- Type: waterproofer
- Colour: grey
- Brand: Bond It
- Manufactuer: Bond It
- Box Size: 1
Bond It Tanking Slurry Waterproof Coating is a blend of Portland cements, high-quality graded aggregates, and chemical modifiers designed to provide a waterproof coating system. It offers high water resistance and excellent adhesion to most common building materials, making it ideal for use on tanks, pits, swimming pools, walls and floors (above and below ground), cellars, underground rooms, and more. This water-based product is safe to apply on damp surfaces and is resistant to both positive and negative water pressure up to 7 bar. It can be easily applied by brush or trowel, and can also be used with Bond It Plug-It (BDH106) for enhanced performance.
Key Points:
- Provides high water resistance and excellent adhesion to most common building materials.
- Safe to apply on damp surfaces and easy to apply by brush or trowel.
- Resistant to both positive and negative water pressure up to 7 bar.
- WRAS approved and suitable for use on a variety of applications including tanks, pools, and underground rooms.
Shelf Life: 12 months from the date of manufacture, before the date shown on the bag, when stored in unopened sacks.
Storage Conditions: Store in the original unopened bags in a cool, dry place between +5ยฐC and +25ยฐC, and protect from frost. Once opened, the product will absorb moisture from the air and become unusable. Do not place bags on the ground.
Coverage: One 20kg bag covers approximately 12mยฒ.
For more in our range of waterproofers, please click here. For our full range of Bond It products, click here.
Alternatively, you can visit the Bond It website here.
Bond It TANKING SLURRY is a high-performance, water-resistant, flexible waterproof coating system made from a blend of Portland cements, quality graded aggregates, and chemical modifiers. It offers excellent adhesion and set control in a water mix form. Suitable Applications include tanks, pits, swimming pools, above and below ground walls and floors, cellars, underground rooms, interior spaces like ducting, party walls, lift shafts, and fish ponds.
Preparation
Bond It TANKING SLURRY is suitable for use on brick, stone, and concrete surfaces. Ensure all contact surfaces are clean, sound, and free from dust, grease, loose material, or previous coatings. Use abrasive tools, jet washing, or wire brushing to prepare the surface. Any water pressure should be tapped off, and floor-wall joints should have a fillet inserted. Fill running water leaks and surface defects with Bond It PLUG IT before applying TANKING SLURRY. Under normal conditions, no priming is required, but for difficult surfaces, Bond It EXTERIOR PREGRIT or SBR ADMIXTURE can be used as a primer. Seal around services and pipes with Bond It GRIPBOND PRO HYBRID SEALANT.
Mixing
Mix 5 liters of clean water with 20kg of dry material in a suitable container. Slowly add the powder to the water, mixing continuously until a creamy consistency is achieved. The mix should not be too wet, and no more should be mixed than can be applied within 30 minutes.
Application
Apply Bond It TANKING SLURRY in two coats between +5ยฐC and +25ยฐC. For the first coat, apply a 2mm layer vertically, ensuring coverage in crevices and edges. After 3 hours, check for gaps, and if the first coat is dry, apply the second coat horizontally. Protect from frost, sunlight, and wet weather after application.
Curing and Overcoating
The slurry should be touch dry in 2 hours and thoroughly dry in 6-8 hours under normal conditions. Do not overcoat until after 5 days, using only cement-based renovating plaster for plastering or water-based paints (not silk). Clean tools immediately after use.
Limitations
Bond It TANKING SLURRY should not be applied over plaster, wallpaper, or paint, as moisture will be trapped underneath, causing these materials to fail and damaging subsequent coatings. It is not suitable for use on wood, plastic, or fabric surfaces, nor for gypsum-based plasters. Only stainless steel form details should be used.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: ยฃ3.11 inc. VAT
ยฃ2.59 ex. VAT
From: ยฃ8.03 inc. VAT
ยฃ6.69 ex. VAT
From: ยฃ3.11 inc. VAT
ยฃ2.59 ex. VAT
From: ยฃ32.23 inc. VAT
ยฃ26.86 ex. VAT
-
ยฃ3.19 inc. VAT
ยฃ2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
ยฃ2.94 inc. VAT
ยฃ2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
ยฃ9.06 inc. VAT
ยฃ7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
ยฃ6.78 inc. VAT
ยฃ5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.