CM Primer C 1L
£31.92 inc. VAT
£26.60 ex. VAT
- Product ID: CMPRIMC
- Suitable For: priming dry, porous surfaces that form the bonding face of an expansion/construction joint.
- Area of use: INT & EXT
- Volume: 1 LTR
- Container Type: tin
- Type: primer
- Brand: CM Sealants
- Manufactuer: CM Sealants
PRIMER C – Suitable for priming dry, porous surfaces that form the bonding face of an expansion/construction joint.
- Can be used on concrete, cement/epoxy mortars, timber and porous stone surfaces.
- Should not be used on glazed, metallic or sealed surfaces (e.g. G.R.P. polished stone, painted surfaces etc.)
Preparation
All joints should be dry and free from dirt, dust, grease and old sealants. Cleaning may be carried out by sand/gritblasting, grinding, sawing or water jetting. Wire brushing must only be used for removing filler boards.
Joint sides must be straight and parallel. Spalled joints should be repaired with the appropriate material.
Following preparation, place into the base of the joint, bond breaker or BACK UP FOAM, to form the correct cross section.
Priming
After cleaning, the joint faces should be primed using PRIMER C using a small brush, care being taken to ensure complete coverage.
- After priming, allow 30 minutes for the solvent to evaporate. If the sealant application is delayed for more than 2 hours after priming, joints should be reprimed.
You must be logged in to post a review.
| Elementlength | |||||||
| up to 1,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
up to 2,5 m |
up to 3,5 m |
up to 4,5 m |
|
| Type of window frame material |
Minimum witdth of joints for a butled mounting b in mm |
Minimum witdth of joints for a inner mounting b in mm |
|||||
| Hard PVC (white) | 10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Hard PVC and PMMA (dark) (colour extruded) |
15 | 20 | 25 | 30 | 10 | 15 | 20 |
| Hard PUR integral foam | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Wood-aluminium-window | 10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (bright) |
10 | 10 | 15 | 20 | 10 | 10 | 15 |
| Aluminium-plastic sandwich frame (dark) |
10 | 15 | 20 | 25 | 10 | 10 | 15 |
| Wooden window frame | 10 | 10 | 10 | 10 | 10 | 10 | 10 |
Related Products
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £9.79 inc. VAT
£8.16 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £10.07 inc. VAT
£8.39 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £6.59 inc. VAT
£5.49 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £3.11 inc. VAT
£2.59 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.86 inc. VAT
£2.38 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £2.69 inc. VAT
£2.24 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
From: £16.80 inc. VAT
£14.00 ex. VAT
Select options
This product has multiple variants. The options may be chosen on the product page
-
£3.19 inc. VAT
£2.66 ex. VATBond-It De-Bond Mate is A non-drip gel formula for the complete removal of cured silicone sealant, particularly when silicone has been accidentally smeared over glass, ceramics or countertops. Removes all types of silicone sealant, leaving surfaces ready for re-sealing. For all other Bond-it products on our website, please click here. For any further information, you may need on Bond-it, please visit their website here. -
£2.94 inc. VAT
£2.45 ex. VATBond-it Flash Mate Lead Silicone is a low modulus neutral cure fast-skinning, roof sealant It is a high-performance neutral cure silicone sealant, specifically designed for use with roofing products both modern and traditional. For all other Bond-it products on our website, please click here. For an alternative silicone for lead, click here. For any further information you may need on Bond-it, please visit their website here. -
£9.06 inc. VAT
£7.55 ex. VATEverbuild 565 Clean Room Silicone is a neutral cure, low modulus, odourless sealant that adheres to a wide range of surfaces. Advantages - Mould Resistant for up to 10 years. - Bacterial resistance. - Excellent tooling and slow skinning properties. - Excellent adhesion properties to most surfaces. - Non-slump formula. - Excellent weathering properties. For application guns click here. For application tools click here. For all other Everbuild products on our website, please click here. For any further information on Everbuild products, please visit -
£6.78 inc. VAT
£5.65 ex. VATEverbuild Aqua Mate Sealant is a high modulus, reactive curing silicone sealant specially designed for aquariums. It remains permanently flexible & forms a watertight seal. Advantages - Everbuild Aqua Mate is free from fungicide and solvent - will not harm fish. - Fast cure - gives quick early strengths. - Extremely low dirt pick up. - Will withstand continuous water immersion. For application guns for this product, please click here. For all other Everbuild products on our site, please view here. For any further information on any Everbuild products, ple
Reviews
There are no reviews yet.